Download Print this page
Ninja Blast BC151H User Manual
Ninja Blast BC151H User Manual

Ninja Blast BC151H User Manual

Portable blender

Advertisement

Quick Links

NINJA
BLAST
PORTABLE BLENDER
RECIPE BOOK NOT INCLUDED
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ ALL INSTRUCTIONS BEFORE USE • FOR HOUSEHOLD USE ONLY
cm
Read and review instructions for operation and use.
A
Indicates the presence of a hazard that can cause personal injury, death or substantial property damage if
the warning included with this symbol is ignored.
{}
For household use only.
+
Indicates location to attach USB-C cord for charging unit.
When using electrical appliances, basic safety precautions should always be followed, including the following:
AWARNING:
To reduce the risk of injury, lire, electrical shock or property damage, basic safety precautions must always be followed,
including the following numbered warnings and subsequent instructions. Do not use appliance for other than intended use.
1
Read all instructions prior to using the appliance and its accessories.
2
Use only a power supply with an extra low voltage corresponding to the marking on the bottom of the motor base.
ALWAYS exercise care when handling the BlastBlade" Assembly. The blades are sharp, handle carefully. ONLY grasp the BlastBlade" Assembly
by the motor base. Failure to use care when handling the BlastBlade" Assembly will result in a risk of laceration.
4
Take your time and exercise care during unpacking and appliance setup. This appliance contains sharp, loose blades that can cause injury
if mishandled.
5
Take inventory of all contents to ensure you have all parts needed to properly and safely operate your appliance.
6
Before use, wash all parts that may contact food. Follow washing instructions covered in this Owner's Guide.
7
DO NOT blend hot liquids, effervescent, or carbonated liquids, as doing so may cause pressure buildup, resulting in risk of burns or other
injuries to the user.
8
DO NOT fill the blending vessel past the MAX FILL line.
Blades are sharp. Handle carefully.
9
10 Keep hands, hair, and clothing out of the vessel when loading and operating. DO NOT put your hands inside the vessel or anywhere near
the BlastBlade" Assembly. Blades can still activate when the sip lid is removed.
11
Remove utensils prior to processing. Failure to remove may cause the blending vessel to be damaged or to shatter, which may cause
personal injury.
12 To protect against the risk of fire from battery damage, DO NOT submerge the motor base in any form of liquid.
13 DO NOT store outdoors or allow the product to be submerged in liquid.
14 DO NOT allow children to operate this appliance or use as a toy. Close supervision is necessary when any appliance is used near children.
15 This appliance is NOT intended to be used by people with reduced physical, sensory, or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning use of the appliance by a peron responsible for their safety.
16 Before each use, inspect BlastBlade" Assembly for damage. If a blade is bent or damage is suspected, contact a service center.
17 DO NOT attempt to sharpen blades.
18 DO NOT allow any part of the unit to contact hot surfaces, including stoves and other heating appliances.
19 ALWAYS use the appliance on a dry and level surface.
19 ALWAYS use the appliance on a dry and level surface.
20 Keep hands, hair, and clothing out of the vessel when loading and operating.
21 ONLY use attachments and accessories that are provided with the product or are recommended by SharkNinja. The use of attachments not
recommended or sold by SharkNinja may cause fire, electric shock, or injury.
22 During operation and handling of the appliance, avoid contact with moving parts.
23 DO NOT operate the appliance with an empty container.
24 DO NOT microwave any containers or accessories provided with the appliance.
25 DO NOT perform grinding operations.
26 Before operation, ensure all utensils are removed from containers. Failure to remove utensils can cause the vessel to shatter and potentially
result in personal injury and property damage.
27 DO NOT attempt to defeat the interlock mechanism. Ensure the vessel and sip lid are properly installed before operation.
28 DO NOT expose the containers and accessories to extreme temperature changes. They may experience damage.
29 NEVER leave the appliance unattended while in use.
30 If you find unmixed ingredients sticking to the sides of the cup, turn off the appliance using the Power Button, and use a scraper to
dislodge ingredients.
31 DO NOT attempt to remove the vessel and/or sip lid from the motor base while the BlastBlade" Assembly is still spinning. Allow the appliance
to come to a complete stop before removing lid and/or vessel.
32 DO NOT store ingredients for extended amounts of time before or after blending them. Some foods may contain active ingredients or release
gases that will expand if left in a sealed container, resulting in excessive pressure buildup that can pose a risk of injury.
33 If the appliance overheats, a thermal switch will activate and temporarily disable the motor. To reset, turn OFF the Ninja Blast" Portable Blender
using the Power Button and allow it to cool for approximately 15 minutes before using again.
34 DO NOT process dry ingredients without adding liquid to the blending vessel. Unit is not intended for dry blending.
35 Operate ONLY with the sip lid on.
36 DO NOT refrigerate or freeze blender.
BATTERY USE
The battery is the power source for the Ninja Blast" Portable Blender. Carefully read and follow all charging instructions.
2
DO NOT incinerate this appliance even if it is severely damaged. The lithium-ion batteries can explode in a fire. Always properly recycle
products powered by lithium-ion batteries.
3
Since there is no power cord, prevent accidental blade activation by ensuring the blender is turned OFF when not in use, while cleaning,
or when drinking from the sip lid.
4
Keep the battery away from all metal objects such as paper clips, coins, keys, nails, or screws. Shorting the battery terminals together
increases the risk of fire or burns.
Under abusive conditions, liquid may be ejected from the battery. Avoid contact with this liquid, as it may cause irritation or burns. If
contact a service center.
6
This unit contains batteries that are only replaceable by skilled persons.
814100216
7
This unit contains batteries that are non-replaceable and moving parts that potentially present risk to the user.
SAVE THESE INSTRUCTIONS
• Accessory type and quantity
may vary depending on the
model.
• The image shown here is for illustrative purposes
• The image shown here is for illustrative purposes
only and may be subject to change.

Advertisement

loading
Need help?

Need help?

Do you have a question about the Blast BC151H and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Ninja Blast BC151H

  • Page 1 33 If the appliance overheats, a thermal switch will activate and temporarily disable the motor. To reset, turn OFF the Ninja Blast" Portable Blender using the Power Button and allow it to cool for approximately 15 minutes before using again.
  • Page 2 • Accessory type and quantity may vary depending on the model. • The image shown here is for illustrative purposes only and may be subject to change. • The cables mentioned in this guide is not supplied with your unit. S Open the sip lid to sip, or remove the lid to pour out blender outputs into another container.