Installing The Battery And Checking The Battery Level.19 - Canon EOS-1V Instructions Manual

installing the Battery and Checking the Battery Level
Installing the Battery
The battery is housed In the camera grip. Remove the grip to Install one
2CR5 lithium battery.
• For the EOS-1 V HS, see page 115.
Remove the grip.
• Use a coin to turn and loosen the grip
screw as shown by the arrow In the
figure. Slide off the grip downward.
Open the cover.
Install the battery.
■ Install the battery so that the battery
contacts are on the right and bottom.
Then close the cover.
4
Reattach the grip.
• Reattach the grip to the camera, then
turn the grip screw to tighten
securely.
Q Lithium baneries may not be available in certain areas. Carry a spare battery
when going on a trip or vrhen you will use many rolls of film.
19