Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for GreenTec Quadsaw LRS 2404
Summary of Contents for GreenTec Quadsaw LRS 2404
- Page 1 This page is intentionally left...
- Page 2 GreenTec LRS 2402 Quadsaw...
- Page 3 Should you find the information given in this book different to the machine it relates to please contact the “After Sales Department” for advice. Merkurvej 25 DK 6000 Kolding Denmark Tel: +45 75553644 Fax: +45 75554243 Email: info@greentec.eu http: www.greentec.eu © GreenTec Machinery Limited 2016 GreenTec LRS 2402 Quadsaw...
-
Page 4: Table Of Contents
Use of Warning Signs ........................... 24 ..........................25 AFETY TICKERS STORAGE ..........................26 NOISE MEASURING ....................... 26 SUPPLIER INFORMATION AND CE-DECLARATIONS ............27 WARNINGS, BAN AND DIRECTIONS ................... 28 DISASSEMBLE ........................28 GREENTEC WARRANTY ....................... 29 GreenTec LRS 2402 Quadsaw... -
Page 5: Introduction
This parts list contains information that are important and useful for maintaining your Greentec machine's reliability, dependability and value. You are welcome to visit our website www.greentec.eu - where the login via the dealer's ac- cess gives you the latest updates on instructional and part books on our entire product range. -
Page 6: Useful Information
Please fill out the list below to ensure that the necessary information is at hand when ordering spare parts etc. Serial No. Delivery date Dealer E-mail Tel. Merkurvej 25 DK 6000 Kolding Denmark Tel: +45 75553644 Fax: +45 75554243 Email: info@greentec.eu http: www.greentec.eu Open: Monday-Friday 8-16 GreenTec LRS 2402 Quadsaw... -
Page 7: General Information
General Information Read this manual before fitting or operating the machine or accessory. Whenever any doubt exists contact your local dealer or the GreenTec Service Department for assistance. Only use ‘Genuine GreenTec Parts’ on GreenTec machinery and equip- ment. DEFINITIONS: The following definitions apply throughout this manual;... -
Page 8: Ce Declaration Of Conformity
Adapted EEC directive EG Guideline 2006/42/EF, 89/392/EEC & 98/37/EC We, GreenTec A/S, Merkurvej 25, 6000 Kolding, hereby declare that in terms of its design, method of construction and our execution thereof, the item of machinery described below complies with the basic health and safety regulations of the respective EU Directives. -
Page 9: Vehicle / Tractor Preparation
– in the instance of Power Arm hedgecutters it must be remembered that the machines centre of gravity during work will be constantly moving and will differ from that during transport mode, therefore balance becomes critical. GreenTec LRS 2402 Quadsaw... -
Page 10: Factors That Affect Stability
It is recommended that you consult your vehicle manufacturer or local dealer to obtain specific advice on this subject, additionally advice should be sought from a tyre specialist with regard to tyre pressures and ratings suitable for the type and nature of the machine you intend to fit. GreenTec LRS 2402 Quadsaw... -
Page 11: Mounting The Quadsaw
➢ Maintaining this speed is important for the best optimum performance. Never use the machine with broken or missing sawblades. Blades must be mounted in a downward cutting rotation only. Fig. 1 Blade rotation Fig. 2 Driving direction GreenTec LRS 2402 Quadsaw... -
Page 12: Hose Connection
Never use the machine on a vehicle that is unstable or unsuitable. Attachment to Armsystem or Mounting Carrige Can be attached to Arm-system with a clamp bracket. Nuts should be torqued 200 Nm. Spearhead Twiga & GreenTec HXF 3302 are all specially designed to carry the Quadsaw. GreenTec LRS 2402 Quadsaw... - Page 13 Drive up to the machine, tilt atch- ment bracket into the horizontal position. Locate attachment bar into hooks and secure latches. Tilt bracket backwards 90 Detach supporting legs (only some models) GreenTec LRS 2402 Quadsaw...
-
Page 14: Operation / Introduction
➢ Never use the machine to perform tasks it was not designed for. ➢ Always lower the machine to rest on the ground with blade protection guards fitted when the unit is parked up or not in use. GreenTec LRS 2402 Quadsaw... -
Page 15: Driving Recommendations
➢ Dismount the belt guard to clean the housing. ➢ Inspect and if necessary adjust the belts. (See belt diagram here or under belt guard). ➢ GreenTec A/S recommend changing all sawblade-axles after 1500 hours of work, be- cause of the possibility of metal fatigue. -
Page 16: Lubrication
If fittings require retightening always use 2 spanners and avoid over tightening. If the fitting continues to leak, replace it. GreenTec LRS 2402 Quadsaw... -
Page 17: Oil Supply
➢ Check valve block, hoses and fittings for signs of leaks – retighten or replace seals if required. ➢ Bolts and bushes should be greased and retightened. Regrinding If sawblades are sent to regrinding, GreenTec offers a wooden box made for that purpose. Can contain four saw blades. GreenTec LRS 2402 Quadsaw... -
Page 18: Tensioning The Belts
➢ Adjust powerbelts if required. ➢ Re-check again with tool 200155.0 ➢ Remount the lid. Contact GreenTec A/S After Sales Department if you have any questions. We might help you with a piece of good advice. Belt diagram LRS 2402 Tool for belt tension controlPart no. -
Page 19: Correct Belt Tension
2. Check/adjust the short belt by the engine. 3. Check/Adjust the 2 long belts connected to the saw blades. 4. Measure the belt tension on the middle of the belts. See 5. Remount the lid. Technical data and description of working tool GreenTec LRS 2402 Quadsaw... - Page 20 50 litres. Relief valve 180 bar Oil flow 28,0 CC 85 litres. Relief valve 150 bar e. g. Twiga 4-7000 PTO speed 540 e. g. Twiga RPO PTO speed 440 e. g. Twiga MID PTO speed 540 Forward speed 1-5 km/h GreenTec LRS 2402 Quadsaw...
-
Page 21: Safety
➢ Tractor overbalancing when machine arm is extended. ➢ Injection of high-pressure oil from hydraulic hoses or couplings. ➢ Machine overbalancing when freestanding (out of use). ➢ Road traffic accidents due to collision or debris on the road. GreenTec LRS 2402 Quadsaw... -
Page 22: Before Using This Machine
➢ Operate the blades at a speed between 3000-3200 rpm (depending on model). ➢ Ensure that all warning labels are always visible and that they are not damaged, de- faced or missing. ➢ Follow the manufacturer’s instructions for attachment and removal of machine from the tractor. GreenTec LRS 2402 Quadsaw... -
Page 23: Never
➢ Attempt any maintenance or adjustment without first disengaging the PTO, lowering the head to the ground, stopping the tractor engine and applying the tractor parking brake. ➢ Enter the working area of the machine (risk of injury!). GreenTec LRS 2402 Quadsaw... -
Page 24: Additional Safety Advice
No advice given here can replace ‘good common sense’ and ‘total awareness’ at all times, but will go a long way towards the safe use of your GreenTec machine. GreenTec LRS 2402 Quadsaw... -
Page 25: Safety Stickers
Observe instruc- tions and safety rules when operating. Warning Warning Do not remove / open Check all nuts and bolts are tight every guard when parts are ro- 8 hours – retighten if tating. required. GreenTec LRS 2402 Quadsaw... -
Page 26: Storage
Remember: regular maintenance will greatly increase the life of the machine. Noise measuring Noise measuring has been made on the machine during normal working conditions at GreenTec A/S, Denmark, with a Elma 1350 noise measurer, type ICE 651 type II. -
Page 27: Supplier Information And Ce-Declarations
: +45 75 55 42 43 CE-declaration Producent GreenTec A/S : +45 75 55 36 44 Telefax : +45 75 55 42 43 Machine No. : LRS 2402 Delivery date : _____________ Delivery year : 2017 GreenTec LRS 2402 Quadsaw... -
Page 28: Warnings, Ban And Directions
Category Example of parts Rubber and plastic Hoses, plastic strip Technical components Pumps, motors, hydraulic hoses Pure metal Plates, pipes, guard Removal of the parts must be done according to national and EU legislation. GreenTec LRS 2402 Quadsaw... -
Page 29: Greentec Warranty
Greentec. Only genuine Greentec replacement parts will be allowable for warranty claims. 7. All parts replaced by Greentec under warranty become the property of Greentec and must be re- turned to Greentec if Greentec so request. Such parts may only be disposed of after a warranty claim has been accepted and processed by Greentec. - Page 30 GreenTec LRS 2402 Quadsaw...
- Page 31 GreenTec LRS 2402 Quadsaw...
Need help?
Do you have a question about the Quadsaw LRS 2404 and is the answer not in the manual?
Questions and answers