SIP Fireball RP125 Manual
  1. Manuals
  2. Brands
  3. SIP Manuals
  4. Heater
  5. Fireball RP125
  6. Manual

SIP Fireball RP125 Manual

Radiant propane heater
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SIP
SIP Industrial Products
Industrial Products
Limited
Limited Gelders
Gelders Hall
Hall Road
Shepshed
Shepshed
Loughborough
Loughborough
Leicestershire
Leicestershire
LE12 9NH
LE12 9NH
United
United Kingdom
Kingdom
For help or advice please contact
your distributor, or sip directly on:
Tel.: 01509 500400
Email:
sales@sip-group.com
or
customerservice@sip-group.com
www.sip-group.com
Road
Please read and fully understand the instructions in this manual
before operation. Keep this manual safe for future reference.
Fireball RP125 Radiant
Propane Heater
SIP Code 09316

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Fireball RP125 and is the answer not in the manual?

Questions and answers

Related Manuals for SIP Fireball RP125

Summary of Contents for SIP Fireball RP125

  • Page 1 Fireball RP125 Radiant United United Kingdom Kingdom Propane Heater For help or advice please contact your distributor, or sip directly on: Tel.: 01509 500400 Email: sales@sip-group.com SIP Code 09316 customerservice@sip-group.com Please read and fully understand the instructions in this manual www.sip-group.com...

  • Page 2: Function & Operating Parameters

    INTRODUCTION Thank you for purchasing this SIP Radiant Gas Heater. designed for industrial use only, i.e. NOT for domestic use. This portable gas heater is designed to BS 4096 for industrial applications, to give safe, efficient and reliable operation, and is for use with Propane Gas only.

  • Page 3: General Safety Precautions

    GENERAL SAFETY PRECAUTIONS 9. For indoor use only in well Read, and make sure you fully ventilated areas. understand the following precautions and the hazards associated with this 10. If at any time gas odor is type of equipment. detected, IMMEDIATELY STOP 1.

  • Page 4: Minimum Clearances From Combustibles

    MINIMUM FRESH AIR OPENING REQUIREMENTS • Do not use in unventilated areas. • The flow of combustion and ventilation air must not be obstructed. Warning: PROVIDE AT LEAST 3FT OPENING OF FRESH, OUTSIDE AIR WHILST RUNNING THIS HEATER. IF PROPER FRESH OUTSIDE AIR VENTILATION IS NOT PROVIDED, CARBON MONOXIDE POISONING CAN OCCUR.
  • Page 5 IF YOU SMELL GAS LP gas and natural gas have man-made NO ODOUR DETECTED odorants added specifically for detection 1. Some people cannot smell the odour of fuel gas leaks. added to propane (LP) or natural gas. If a gas leak occurs you should be able to You must determine if you can smell smell the fuel gas.

  • Page 6: Gas System

    FEATURES Understanding the basic operation of the heater will reinforce the need to maintain the unit in top condition at all times whilst always observing the safety precautions. The heater comprises three basic systems: 1. The gas system. 2. The ignition system. 3.

  • Page 7: Installation

    The replacement hose assembly shall be that specified by the SIP Industrial Products Ltd. UNPACKING 1. Remove heater from carton.

  • Page 8: Gas Connection

    When used, the heater should rest on suitable insulating material at least 1 inch thick and extending 3ft or more beyond the heater in all directions. GAS CONNECTION The connection to a propane cylinder must be made in a well ventilated area using the regulator and hose assembly supplied with the appliance.

  • Page 9: First Use

    OPERATING INSTRUCTIONS WARNING: BEFORE STARTING THE HEATER, YOU MUST ENSURE THAT THE MINIMUM VENTILATION REQUIREMENTS ARE OBSERVED TO AVOID THE RISK OF CARBON MONOXIDE POISONING. FIRST USE The heater reaches a very high temperature and during first use you may notice an odour coming from the heater - this is quite normal and will disperse quickly (It is recommended the heater is initially run outside to enable the odour to clear).
  • Page 10 Continue to hold IN the control knob for approx. 1 minute, or until the pilot light remains lit when it is released. 5. With the pilot light lit, slightly push and turn the control valve anticlockwise so that ON is “PILOT”...

  • Page 11: Cleaning And Maintenance

    CLEANING & MAINTENANCE WARNING: NEVER ATTEMPT TO SERVICE THE HEATER WHILE IT IS CONNECTED TO THE PROPANE SUPPLY, IS OPERATING, OR IS HOT. (SEVERE BURNS CAN OCCUR). 1. Turn heater off and let it cool for at least 20 minutes before cleaning. 2.

  • Page 12: Troubleshooting

    TROUBLESHOOTING Fault Cause Remedy Burner fails to 1. Gas supply valve closed. 1. Open gas supply valve slowly light 2. Excess-flow check valve. 2. Close propane supply valve closed propane tank and re-open slowly. 3. Excess-flow check valve. 3. Replace burner orifice. 4.

  • Page 13: Specifications

    2. Insufficient gas supply due 2. Check & use larger cylinder, to ice formation on the or two or more in parallel. cylinder. SPECIFICATIONS Model 09316 Fireball RP125 Radiant Heater Gas Type Propane Output 36.6 kW (125,000 BTU/Hr) Fuel Consumption 2.6 kg/hr...

  • Page 14: Parts Diagram

    PARTS DIAGRAM PARTS LIST Manual Control Valve 00332 Axle CR280 Filter/Diffuser 04466 Axle Bracket CR815 Pilot Orifice 05363 Handle CR725 Thermocouple 09352 Wheel CR810 Pilot Burner 11357 Valve Supply Tube M9005 Regulator 11663 Clamp M9010 Igniter CR805 Burner Manifold M9015 Piezo Starter CR835 Burner...

  • Page 15: Declaration Of Conformity

    DECLARATION OF CONFORMITY...
  • Page 16 This will allow the recycling of raw materials and help protect the environment. For help or advice please contact your distributor, or sip directly on: Tel.: 01509 500400 Email: sales@sip-group.com customerservice@sip-group.com www.sip-group.com...

This manual is also suitable for:

09316

Table of Contents