1. Manuals
  2. Brands
  3. Alfa Network Manuals
  4. Network Hardware
  5. Tube-AHM
  6. User quick manual

Alfa Network Tube-AHM User Quick Manual

Hide thumbs

Advertisement

Table of Contents

Tube-AHM
User Quick Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Tube-AHM and is the answer not in the manual?

Questions and answers

Related Manuals for Alfa Network Tube-AHM

Summary of Contents for Alfa Network Tube-AHM

  • Page 1 Tube-AHM User Quick Guide...

  • Page 2: Package Contents

    Package Contents...

  • Page 3: Product Overview

    Product Overview LED Indicator / Interface Descriptions On - Power on Power Indicator (Blue) Off - No power Blinking - Device in booting process System Indicator (Red) Blinking Slow -Device is alive Ethernet Indicator (Green) Blinking - Ethernet is sending or receiving data On –...

  • Page 4: Hardware Installation

    Hardware Installation...
  • Page 5 Connect the Tube-AHM and PoE adapter’s PoE port using Ethernet cable. Rotate the waterproof connector until it is tight. 2.Attach Outdoor Omni Antenna to the Tube-AHM and rotate the antenna until it is tight. Seal the gap on the connector with the water resistant tape.
  • Page 6 Open Setup Page and Login Open a browser then type 192.168.100.1 into the address bar to access the setup page, default username is “root” and no need password. After logging in, the “STATUS” page will be shown.
  • Page 7 How to Setup AP Mode Please go to the “MORSE → HaLow Configuration“ page.
  • Page 8 How to Setup AP Mode 1).Click “Access Point” page 2).Enable “Bridge” mode 3).IP Settings → “Static”, and fill the IP Address, Netmask, Gateway information. 4).After the setting is completed, please click the "Save" button.
  • Page 9 How to Setup AP Mode Please go to the “NETWORK → Wireless“ page.
  • Page 10 How to Setup AP Mode Click “Edit” button for Wi-Fi HaLow settings...
  • Page 11 How to Setup AP Mode 1).Wireless Security → Encryption → “No Encryption”. 2).After the setting is completed, please click the "Save" button.
  • Page 12 How to Setup AP Mode Don't forget to click the “Save & Apply” button.
  • Page 13 How to Setup AP Mode Please change the IP Address of the computer to the same network segment as Tube-AHM.
  • Page 14 How to Setup AP Mode When the Client connects to the AP, it will be shown on the “STATUS” page. Note: When you reload the web page, please note whether you have changed the device IP! Note: After the device settings are completed, if you change the settings in the WEB UI of the AP, "Save &...
  • Page 15 How to Setup Client Mode Please go to the “MORSE → HaLow Configuration“ page.
  • Page 16 How to Setup Client Mode 1).Click “Station” page. 2).Click “Scan” button for AP scan, and Encryption type select “OWE”. 3).Enable “Bridge” mode 4).IP Settings → “Static”, and fill the IP Address, Netmask, Gateway information. 5).After the setting is completed, please click the "Save" button.
  • Page 17 How to Setup Client Mode Please change the IP Address of the computer to the same network segment as Tube-AHM.
  • Page 18 How to Setup Client Mode When the Client connects to the AP, it will be shown on the “STATUS” page. Note: When you reload the web page, please note whether you have changed the device IP! Note: After the device settings are completed, if you change the settings in the WEB UI of the AP, "Save &...
  • Page 19 *** For example, if your front-end router settings are as follows: Gateway IP: 192.168.0.1 DHCP Server Range: 192.168.0.2~192.168.0 253 Please go to the “MORSE → HaLow Configuration“ page modification settings examples are as follows: For Tube-AHM AP IP Address: 192.168.0.111 Gateway: 192.168.0.1 Please click the "SAVE" button.
  • Page 20 How to Setup with the Router For Tube-AHM Client IP Address: 192.168.0.112 Gateway: 192.168.0.1 Please click the "SAVE" button.
  • Page 21 How to Setup with the Router After the setting is completed, it will be shown as follows For Tube-AHM AP For Tube-AHM Client Note: When you reload the web page, please note whether you have changed the device IP!
  • Page 22 How to Reset Default and Upload Firmware Please go to the “SYSTEM → Backup / Flash Firmware” page. Reset Default Upload Firmware...

  • Page 23: Application Scenario

    Application Scenario Tube-AHM STA (Client) Sensor Tube-AHM...

  • Page 24: Troubleshooting

    Troubleshooting LED indicators shown abnormally Please check to see if all cable connectors (PoE adapter and Ethernet cable) are connected to your device properly. Please use the PoE adapter, which is included in the package content. Client disconnected after changing settings After the device settings are completed, if you change the settings in the WEB UI of the AP, "Save &...

Table of Contents