Draytek Vigor 2927Lax-5G Quick Start Manual page 9

LAN P1-P5
On
Left LED Off
Blinking
On
Right LED
Off
Interface Description
Restore the default settings. Usage: Turn on the router (ACT
LED is blinking). Press the hole and keep for more than 5
Factory Reset seconds. When you see the ACT LED begins to blink rapidly
than usual, release the button. Then the router will restart
with the factory default configuration.
Connecter for a USB device (for 3G/4G USB Modem or printer
USB
or thermometer).
Connecter for local network devices or modem for accessing
WAN1
Internet.
Connecter for local network devices or modem for accessing
Internet.
WAN2 / P6
It is a switchable port. It can be used for LAN connection or
WAN connection according to the settings configured in WUI.
LAN P1-P5 Connecters for local network devices.
PWR Connecter for a power adapter.
ON/OFF Power Switch.
Connecter for installing LTE antennas.
SIM Card Slots for installing SIM card(s).
The port is connected.
The port is disconnected.
The data is transmitting.
The port is connected with 1000Mbps.
The port is connected with 10/100Mbps
3