Draytek Vigor 2927Lax-5G Quick Start Manual page 11

Off
Blinking
WAN1,WAN2 / P6
On
Off
Left LED
Blinking
On
Right LED
Off
LAN P1-P5
On
Left LED
Off
Blinking
On
Right LED
Off
WLAN: Wireless access point is ready.
Wireless function is disabled.
It will blink slowly while wireless traffic goes
through.
ACT and WLAN LEDs blink quickly and
simultaneously when WPS is working, and will
return to normal condition after two minutes.
(You need to setup WPS within 2 minutes.)
The port is connected.
The port is disconnected.
The data is transmitting.
The port is connected with 1000Mbps.
The port is connected with 10/100Mbps.
The port is connected.
The port is disconnected.
The data is transmitting.
The port is connected with 1000Mbps.
The port is connected with 10/100Mbps
5