Luminext Sustainder RF2 Installation Instruction

Versie: 1.0
Datum: 17-07-2024
The RF2 IoT Gateway (IoT Gateway in the remainder of this document) is a product in the Luminext
program for dynamic dimmable street lighting with remote management. The IoT Gateway has
integrated antennas for 868 MHz and GSM and has an IP65 housing.
Safety

Installation should be performed by qualified personnel only.

Adhere strictly to the installation instruction below to avoid danger and damage to the IoT
Gateway.

Disconnect power at the source before installation, inspection or removal. The voltages at the
primary side of the IoT Gateway are not touch proof.

Do not use the IoT Gateway if it is damaged.

The electrical installation must be in conformance with the national legislation and relevant
standards.

The mains connection of the IoT Gateway must be provided with a 2A fuse and a possibility to
disconnect the mains.
Contact information: for more info please contact the product supplier
Luminext BV | Schoudermantel 37 | 3981 AE Bunnik | Nederland | +31(0)30 207 2017 | support@luminext.eu |
www.luminext.eu
© Luminext BV 2024
INSTALLATION INSTRUCTION: RF2 IoT Gateway
1