Related Manuals for Logitech AKR200
Summary of Contents for Logitech AKR200
- Page 1 Acer Wireless Keyboard and Mouse USER’S GUIDE Ver.:1.00 AKR200 / AMR200 CAUTION: To use this product properly, please read the user’s guide before installing.
- Page 2 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- Page 3 Radiation Exposure Statement: The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.
-
Page 4: Functional Introduction
Functional Introduction Mouse Buttons 1. Left button 6. Backward 2. Right button 7. Battery Cover 3. Scrolling Wheel 8. ON/OFF Switch 4. LED Indicator 9. Nano Receiver 5. Forward Forward Press this button to view the next page in your Internet browser. -
Page 5: Keyboard Buttons
Keyboard Buttons AAA Battery X 2 Key Function (* compound key, Press with Fn key) Turn on the Media player Media Select program. Mute (turns off) the Mute computer’s sound. Volume down Decrease the computer’s (Voice-) sound volume. - Page 6 Volume up Increase the computer’s (Voice+) sound volume. Switch to the previous media Previous track. Switch to the next media Next track. Switch between playing and Play/Pause pausing media. Stop playing the media in the Stop (Media) media player. Start the default Web Homepage browser and loads the home (www/e)
-
Page 7: Installing The Batteries
Installing the batteries Step 1: Take the battery cover off. Step 2: Insert the battery as shown inside the battery compartment. AMR200 Pull 1st 2nd AA Battery X 2 AKR200 AAA Battery X 2 Step 3: Replace the cover. - Page 8 Step 4: Turn on power switch. AMR200 **Warning: * Please insert the battery with the correct position according to the instruction labeled on the mouse & Keyboard. Setup the Connection between the Receiver and the Mouse & Keyboard 1. Insert the battery into the mouse & Keyboard, then follow the steps below.
- Page 9 3. Plug the Nano receiver into the USB port on your computer. 4. If the device does not work, please turn it into pairing mode. 5. Pairing: Re-plug the receiver into the USB port on your computer, then press connect button of the mouse and keyboard “ESC + K”.
- Page 10 *Keyboard Indicator LED is on for 10 sec. LED Indicator Power ON LED Blinking During Pairing (LED OFF when paired or failed after 10 sec.) LED Blinks for 10 sec. Low Battery Warning...
Need help?
Do you have a question about the AKR200 and is the answer not in the manual?
Questions and answers