Logitech AKR200 User Manual page 9

3. Plug the Nano receiver into the USB port on your
computer.
4. If the device does not work, please turn it into pairing
mode.
5. Pairing: Re-plug the receiver into the USB port on your
computer, then press connect button of the mouse and
keyboard "ESC + K". If the mouse or keyboard does not
work after 10 seconds, pair them again.
(The receiver has auto pairing function).
6. The LED indicator on the mouse & Keyboard flashes
steadily when it is in pairing mode and stops blinking
when it is successfully paired with the receiver.
7. When low battery, the battery indicator on the keyboard
or the mouse will start to blink.
LED Indicator
*Mouse Indicator
LED is on for 10 sec.
Power ON
LED Blinking
During Pairing (LED OFF when paired
or failed after 10 sec.)
LED Blinks for 10 sec.
Low Battery Warning
8