Auto Sync - Haier L32A9-AK Owner's Manual

Adjust menu
In VGA and HDMI input mode, H-Position and V-Position can be adjusted to
eliminate transverse line interference.
OK
CH+
VOL-
MENU
CH-
PSM
NOTE
As the frequency of display
differ in PC device you may
select the appropriate
frequency to obtain desired
effect. If the signal of receive
is excess, the picture can be
not displayed or wrong on
the screen.
(Continue)
PC setting
1
Press CH+/- buttons to
Q.VIEW
select RGB, then press VOL-
/+ buttons to enter the sub
menu.
VOL+
2
Press
select the desired item, press
S SM
VOL+/- button to adjust.
RGB
of the numerical value of red,
green and blue in VGA/HDMI
mode.
Default
This is opted for adjustment of parameters to delivery setup
in VGA mode.(After the operation, complete will be on the
right of the operation)
Repeat step 1 and 2 to set the Default.

Auto Sync

This is opted for adjustment of picture location requency and
phase parameters in VGA mode.(After the operation, complete
will be on the right of the operation)
In VGA , if no signal input, the Auto Sync will be no adjustable.
Repeat step 1 and 2 to set the
Note
Recommendatory frequency as follow:
Sequence
CH+/- buttons to
is opted for adjustment
frequency
Display Mode
Adjust
RGB
Default
Auto Sync.
Color Temperature
Black Stretch
A
B
C
Red
Green
Blue
A
B
C
Auto Sync .
H-frequency V-frequency
KHz Hz
31.5 60
37.88 60
48.36
60
Normal
Normal
On
0
0
0
Remark
DOS
VESA
VESA
33