Table of Contents
Advertisement
Others functions
Nicam Sleep display functions
DISPLAY
Sleep
NICAM
Press the I/II button will result in fast swap of NICAM
function of current program.
Display function
Press the DISPLAY button, then
the channel number and system
will be displayed on the screen.
Press
the DISPLAY button
it is disappear.
Sleep
The TV set will switch automatically to standby at the
preset time with the SLEEP time on. You may set the
sleep time.
each press of SLEEP button repeatedly on the remote
control to select the number of preset minutes, the timer will
be set in sequence: (0min, 5min, 15min, 30min,60min,
90min, 120min).
After the sleep time is programmed, the display will appear
briefly every ten minutes to remind you that the sleep timer
is operating.
To confirm the sleep timer setting, press SLEEP and the
remaining time will be displayed for a few seconds.
To cancel the sleep timer, press SLEEP repeatedly until the
display turns to 0 min.
again,
3
AUTO
B/G
37
Advertisement
Table of Contents
