Operation; Installation Guide; Channel Menu; Auto Tuning (Dvb-T) - Haier LE40B650CF Instruction Manual

04 OPERATION

Installation Guide

The First Time Setup screen will appear when the TV is first switched
on or reset to the factory setting.
First Time Setup
OSD Language
Mode Setting Home Mode
Country
Antenna Type
Auto Scan
Start
1).Press the buttons to navigate the menu and
to change the settings. Select your desired language ,Home/Shop
Mode to be displayed on the menu.
HOME or Shop modes
1.When the unit is turn on for the very first time, it will show
Initialization set-up menu. After the OSD language is set, the
user can choose between "shop mode" and "home mode".
When the screen shows the following setting menu and the
cursor stays on the "home mode" choice, press
and "OK" to enter the menu.
Select the usage mode?
shop mode is for shop usage only.
Shop mode
Home mode
If "Shop mode" is choosen, the following menu will displayed.
Are you sure to change to
Shop mode?
OK
Cancel
Choose "OK" to enter the next prompt menu
Shop mode is the most energy mode
Continue?
OK Cancel
Choose "Cancel" to go back to the Initialization set-up menu,
and the cursor will stay at the "home mode" choice. choose it to
go the next menu to choose the country.
2). Press the buttons to select AIR/Cable means DVB-T/DVB-C.
First Time Setup
English
Germany
Air
DTV+ATV
buttons
to adjust,
First Time Setup
OSD Language
Mode Setting
Country
Antenna Type
Cable
Auto Scan
Start
In the UK to connect to cable TV you will require the
appropriate cable TV's company's 'set top box' to be
connected to the TV. Please refer to the cable TV's
instructions manual for further details.
If you select DVB-C, you will select Full or Quick way to
scan.Also you can select Auto Scan mode. DTV+ATV or
DTV only, or ATV only.
3). Channel tuning will commence. This operation
may take up to some minutes . The display will show
the progress of the tuning and the number of
channels found.
4). If you want to skip the DTV tuning, press the
MENU button to interrupt the tuning half way.
You will then go straight to ATV tuning.
5). After tuning is complete, the channels are
arranged in a preset order. If you wish to skip channels,
modify the preset order or rename
channels, select P rogramme Edit under the
C hannel menu.
6). The old password is 0000, you can't use 0000 as new
password.
DTV Digital TV
ATV Analogue TV (not used in UK)

1. CHANNEL MENU

1. 1)Auto Tuning (DVB-T)

1). Press the MENU button and then press the
buttons to select the CHANNEL menu and then press
the OK button or Right button.
2). Press the buttons to select Auto Scan and then
press the OK button.
Operation
English
Home Mode
Germany
Cable
Quick
DTV+ATV
EN-14