Table of Contents
Advertisement
UT25CL User Manual
chargeable batteries, otherwise it may pose a risk of explosion.
• Power off the Meter before cleaning or maintenance. Disconnect the connected measured cable
or other accessories from the Meter and all measured objects.
• Please do not immerse the Meter into water or other liquids. Intrusion of any liquid to the Meter is
not allowed.
• Please wipe the Meter case with damp cloth and mild detergent. Do not use abrasives or solvents.
• The calibration or maintenance must be performed by qualified repair personnel or designated
repair department.
• If the Meter is equipped with replaceable fuse, please adhere to the following operating instructions:
1) Power off the Meter before replacing the fuse and disconnect the connected measured cable.
2) Use only fuse with designated type and current rating. Do not use wrong or repaired fuse or
connect the fuse block, otherwise it may cause fire.
Note: It is normal that weak spark may occur momentarily when UT25CL-T is used as a
voltage meter to measure external voltage.
8
Advertisement
Table of Contents
Need help?
Do you have a question about the UT25CL and is the answer not in the manual?