Haier KXT7020BK Instruction Manual page 6

- PRESET
Press MENU button of the unit or the TUNE button on the remote
until the PRESET screen appears (see picture 2-5).
Press CH up or CH down to scroll through these options.
Press VOL up or VOL down to adjust the desired option.
PRESET
- PROG
This function shows the current channel displayed. Use the VOL up
PROG 120
or VOL down buttons to scroll through the channels.
SKIP OFF
- SKIP
BAND VHF-L
FINE This function allows you to add or delete any channel. If you would
SIGNAL CATV
like to delete a channel simply navigate to the desired channel with
AUTO
the PROG button and press the VOL up or VOL down button until
this function reads "ON".
If you would like to add a channel simply press the VOL up or VOL
down button until the SKIP feature reads "OFF".
2-5
- BAND
This feature simply displays what type of frequency is currently displayed (UHF, VHF, etc).
The BAND function can not be adjusted.
- FINE
The FINE feature controls the fine tuning of each channel. Use the VOL up and VOL down but-
tons to fine tune each frequency for better sound and picture.
- SIGNAL
The unit can work with both cable TV and an antenna. Simply adjust this feature to either ANT
for use with an antenna or CATV for use with cable TV.
The unit can receive up to 80 channels with the antenna setting (ANT) and 136 channels with
cable TV(CATV) setting.
9
- AUTO
Use this feature to program all available channels. Use the CH up or CH down
button to highlight the AUTO feature. Then, press VOL up or VOL down to initiate
this feature. Allow the unit to search all possible channels.
NOTE:
If some channels do not have sound use the FINE feature to fine-tune the channel.
If sound does not appear please refer to the Troubleshooting section.
3. AV/TV button
Use the AV/TV button to switch between watching VIDEO and TV. Switch to
VIDEO. when using an external video source such as a DVD or VCR. Switch to
TV to watch TV through the antenna or cable TV.
4. MUTE button
Press the MUTE button one time, there is mute signal on the screen, press again,
the volume will resume.
5. VOL up / VOL down button
Use the VOL up and VOL down buttons to adjust the volume of the unit. The
volume range is 0-63. VOL up and VOL down buttons are also used to adjust
features in the MENU.
6. CH up/ CH down button
Use the CH up and CH down buttons to go from channel to channel. Also use the
CH up and CH down buttons to navigate the MENU functions.
7. NUMERICAL button(0-9)
Numerical button 0-9 is used for selecting program number , button 0-9 has the
function of power on when the TV is in waiting status.
8. -/-- button
If you want to select two-figure or there-figure program number , you need to
press -/-- button, after -/-- shows on the screen, you can use the numerical button
to input the desired program number.
10