SystemAir fantech ECO-TOUCH IAQ Operating Instructions

OPERATING INSTRUCTIONS
ECO-TOUCH IAQ PROGRAMMABLE TOUCH SCREEN WALL CONTROL
®
I A Q
USE & OPERATION
MANUAL OPERATION
There are simply two (2) selections required to operate
your ventilation system – Ventilation Mode selection
and Fan Speed selection. These can be selected either
manually, via the manual section of the touch screen, or
automatically by activating the ECO mode.
To select a specific mode or speed, simply press
the corresponding Touch Area, indicated in the above
diagram. A blue backlight activates each time a touch
area is pressed.
The unit will ventilate for 20 or 40 minutes, then go into Stand-by for the rest of the hour.
1
When the VENT icon flashes and the RECIRC icon is displayed the unit will ventilate for 20 minutes then recirculate for 40 minutes at the selected speed.
2
AUTOMATIC OPERATION (ECO MODE)
Pressing the ECO mode touch area enables the AUTOMATIC operation of the ventilation
system to optimize its performance based on the Indoor Air Quality (IAQ) sensor, the Indoor
Relative Humidity (RH) sensor, the outdoor conditions, as well as the user preferences. You
can customize the operation of ECO mode to meet your individual needs using the OPTIONS &
PREFERENCES menu.
OPTIONS & PREFERENCES
The OPTIONS menu enables you to customize the
operation of your wall controller. To enter the menu, you
need to first press anywhere in the bottom portion of the
OPTIONS screen section. The icon NEXT will first appear
with a 5 second countdown timer. If you wish to continue
and change the available options, press the NEXT button
before the timer reaches 0 (zero).
Once in the OPTIONS menu, you will have the possibility
to change the options listed on the right. To change the
values of each option, use the up or down arrow buttons.
To navigate to the next available option, press the NEXT
button . When doing so, any changes made to the values
of the previous option will be automatically saved and will
then become your own personal operating preferences.
To exit the OPTIONS menu and return to normal
operation, use the NEXT button to advance to the original
5-second timer. The controller will resume its operation
with your new preferences once the time has elapsed.
If for any reason you cannot find the 5 second timer, the
controller will automatically exit the OPTIONS menu after
1 minute of inactivity.
Air Exchange
mode Animation
Fan speed level
Ventilation system
exchanges indoor
air for outdoor air.
The indoor air is
Ventilation Mode
circulated within the
Selection
house.
The ventilation
system is on
stand-by.
Option
Parameters
Night Performance
Ventilation mode and fan speed during night.
Day Performance
Ventilation mode and fan speed during day.
Relative Humidity
Desired indoor relative humidity selection.
Maintenance Reset
*See Maintenance Section for details.
Paired Timers
Pto
Shows number of paired wireless timers. Timers can be paired on
this screen
Unpair Timers
unp
Hold "Next" button for 5 seconds to unpair all wireless timers to
this control.
MAINTENANCE REMINDER
The Maintenance Icon will display every 3 months (90 days) of runtime as a reminder that maintenance to the ventilation system is
recommended. Refer to ventilation system maintenance instructions. In order to reset the Maintenance timer, enter the OPTIONS
menu and advance to the Maintenance Reset option, which will be indicated by a blinking Maintenance icon. To reset the Maintenance
reminder, hold the NEXT button for 3 seconds until the controller returns to its normal operation.
OPERATION INDICATORS
Recirculation
mode Animation
Fan operation
Animation
and timer
1 Reduced
20 min/hr
Reduced
1
40 min/hr
Reduced
Medium
Normal
20-40-60 MINUTES TIMER OVERRIDE
You can activate an internal timer to force the ventilation system to run at the maximum
speed by pressing the MAX button. When MAX mode is activated, the ventilation system
will exchange indoor air with outdoor air for a period of 20, 40 or 60 minutes, which will be
indicated above the Fan speed level indicator. Repeatedly pressing the MAX button will cycle
through the time periods.
IAQ Level
System stand-by
(Eco Mode only)
Icon activation
Reduced
2
Medium
2
Exchange
Normal
2
Fan Speed
Selection
Reduced
Medium
Normal
Possible Values Default Values
Ventilation Mode/ Air Exchange Mode &
Fan Speed Level Medium Speed
Ventilation Mode/ Air Exchange Mode &
Fan Speed Level Medium Speed
30 to 80% 45%
Reset Timer & Icon
N/A
Display
0 to 8 0
N/A N/A
Rev Date: 2020-01-28
I A Q
Recirculation
Fan Speed
Selection
Item #: 445228