Architectural Mailboxes 3460 Instructions

Thank you for purchasing this premium mailbox accessory item. We know you'll be satisfied
with the years of service it will provide. If you have any questions about how to mount or use
this plaque, or if you need any replacement parts, please call us directly at (310) 374-5700 or
contact us at support@architecturalmailboxes.com.
Tools
(not included)
Wrench
Screwdriver
Power
screwdriver
Types of Applications
1
Wood or Metal
Post
6
1
2
3
8
0
Applying Adhesive Numbers
2
1
Peel reflective
tape from
backing.
2
Apply reflective
tape to address
plaque.
Note: If misaligned,
carefully peel tape
and reapply in
correct location.
DIY Hint to Apply Numbers Stickers Straight and Evenly, Every Time!
Use a clear ruler and lightly stick the lower part of your number stickers onto the ruler's edge using the ruler marks as your
guide to space the numbers evenly. Let the upper portion of the letters stick out the top. Set the ruler down and use your
finger to press the top of each sticker down in place on the reflective tape. When all the stickers are secure, carefully
remove the ruler and press the bottoms of the stickers in place with your finger.
www.architecturalmailboxes.com
Plastic Address Plaque (Model 3460)
Instructions
Contents
cap nuts (x2)
hex nuts (x2)
Drill bit
rubber
washers (x2)
Mailbox
2 5 6 7
(310) 374-5700
small
hex bolts (x2)
phillips
screws (x2)
wood/
sheet metal
screws (x2)
Doorway
1 2 2 6
1 0 0 9
R
plastic
adapters (x10)
alcohol swab
packet (x1)
reflective
tape (x2)
Gate
5
6
5
3
Peel numbers
off the paper
backing.
4
Apply numbers to
refective tape.
Note: If misaligned,
carefully peel
numbers and
reapply in correct
location.
© 2018, Architectural Mailboxes, LLC Rev. D
adhesive
squares (x2)
adhesive
numbers x74
Note: 6 and 9
can be used
interchangeably.
Storefront