Page 1
TC-CS 1410 Originalbetriebsanleitung Originálny návod na obsluhu Handkreissäge Ručná okružná píla Original operating instructions Originele handleiding Hand-held circular saw Handcirkelzaag Mode d’emploi d’origine Manual de instrucciones original Scie circulaire portable Sierra circular de mano Istruzioni per l’uso originali Alkuperäiskäyttöohje Sega circolare a mano Käsipyörösaha...
Page 5
Danger! - Read the operating instructions to reduce the risk of inquiry Caution! Wear ear-muff s. The impact of noise can cause damage to hearing. Caution! Wear a breathing mask. Dust which is injurious to health can be generated when working on wood and other materials.
Danger! 2.2 Items supplied When using the equipment, a few safety pre- Please check that the article is complete as cautions must be observed to avoid injuries and speci ed in the scope of delivery. If parts are damage. Please read the complete operating missing, please contact our service center or the instructions and safety regulations with due care.
4. Technical data Keep the noise emissions and vibrations to a minimum. • Only use appliances which are in perfect wor- Mains voltage: ......220-240 V ~ 50 Hz king order. Power input: ..........1410 W • Service and clean the appliance regularly. Idling speed: ........5500 min •...
• You can now adjust the cutting angle to area. • around 45°. Keep an eye on the cutting angle If you are sawing down a line that has been scale (9) as you do so. drawn, guide the circular saw along the corre- •...
6.3 Switching ON/OFF (Fig. 9) de. Pay attention to the running direction (see arrow on the guard hood and saw blade)! • To switch on: Tighten the screw to secure the saw blade Press the locking button (3) and the ON/OFF (17) and check that the blade runs true.
Article number of the unit • ID number of the unit • Spare part number of the required spare part For our latest prices and information please go to www.Einhell-Service.com Tip! For good results we recommend high-quality ac- cessories from www.kwb.eu welcome@kwb.eu 9.
Page 11
Please note that batteries and lamps (e.g. light bulbs) must be removed from the tool before it is dispo- sed of. The reprinting or reproduction by any other means, in whole or in part, of documentation and papers ac- companying products is permitted only with the express consent of the Einhell Germany AG. Subject to technical changes •...
* Not necessarily included in the scope of delivery! In the eff ect of defects or faults, please register the problem on the internet at www.Einhell-Service.com. Please ensure that you provide a precise description of the problem and answer the following questions in all cases: •...
Page 13
5. To make a claim under the guarantee, please register the defective device at: www.Einhell-Service.com. Please keep your bill of purchase or other proof of purchase for the new device. Devices that are returned without proof of purchase or without a rating plate shall not be covered by the guarantee, because appropriate identi...
Need help?
Do you have a question about the TC-CS 1410 and is the answer not in the manual?
Questions and answers