Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita DP4020
Summary of Contents for Makita DP4020
- Page 1 INSTRUCTION MANUAL Drill DP4020 DP4021 DOUBLE INSULATION Read before use.
-
Page 2: Specifications
SPECIFICATIONS Model: DP4020 DP4021 Drilling capacities Steel 13 mm Wood 30 mm No load speed 0 - 3,000 min Overall length 269 mm 271 mm Net weight 1.7 - 1.9 kg 1.6 - 1.8 kg Safety class • Due to our continuing program of research and development, the specifications herein are subject to change without notice. -
Page 3: Declarations Of Conformity
When operating a power tool outdoors, use an WARNING: The vibration emission during actual extension cord suitable for outdoor use. Use of use of the power tool can differ from the declared val- a cord suitable for outdoor use reduces the risk of ue(s) depending on the ways in which the tool is used electric shock. -
Page 4: Drill Safety Warnings
Zealand, it is legally required to wear a face Service shield to protect your face, too. Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. -
Page 5: Functional Description
Always be sure that the tool is switched off and unplugged before installing or removing the drill bit. For model DP4020 To install the drill bit, place it in the drill chuck as far as it will go. Tighten the chuck by hand. Place the chuck key in each of the three holes and tighten clockwise. -
Page 6: Drilling Operation
Contact Makita To remove the drill bit, hold the ring and turn the sleeve service center or your local dealer to have the tool counterclockwise. -
Page 7: Drilling In Metal
These accessories or attachments Use a cutting lubricant when drilling metals. The excep- are recommended for use with your Makita tool tions are iron and brass which should be drilled dry. specified in this manual. The use of any other... - Page 8 Makita Europe N.V. Jan-Baptist Vinkstraat 2, 3070 Kortenberg, Belgium Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885A78-224 20240320...
Need help?
Do you have a question about the DP4020 and is the answer not in the manual?
Questions and answers
What is the diameter and length of the housing to which the side handle attaches to?