Home > Table of Contents Table of Contents Before You Use Your Brother Machine ....................1 Definitions of Notes ............................2 Notice - Disclaimer of Warranties (USA and Canada) ................... 3 Trademarks ..............................4 Important Note ............................... 5 Introduction to Your Brother Machine....................6 Before Using Your Machine ...........................
Page 3
Network Management Software and Utilities ....................78 Learn about Network Management Software and Utilities ..............79 Additional Methods of Configuring Your Brother Machine for a Wireless Network ........80 Before Configuring Your Brother Machine for a Wireless Network............. 81 Configure Your Machine for a Wireless Network................82 Configure Your Machine for a Wireless Network Using the One Push Method of Wi-Fi Protected ™...
Page 4
Register an External IC Card Reader....................254 Troubleshooting ..........................255 Error and Maintenance Messages ......................256 Error Messages When Using the Brother Web Connect Feature .............. 265 Paper Jams ..............................267 Paper is Jammed in the MP tray ...................... 268 Paper is Jammed in the Paper Tray ....................
Page 5
Change Machine Settings from Your Computer..................381 Change Machine Settings Using Web Based Management ............382 Appendix............................386 Specifications ............................. 387 How to Enter Text on Your Brother Machine ....................392 Supplies ..............................394 Important Information About Toner Cartridge Life ..................396 Accessories..............................397...
Home > Before You Use Your Brother Machine Before You Use Your Brother Machine • Definitions of Notes • Notice - Disclaimer of Warranties (USA and Canada) • Trademarks • Important Note...
Home > Before You Use Your Brother Machine > Definitions of Notes Definitions of Notes We use the following symbols and conventions throughout this User's Guide: WARNING indicates a potentially hazardous situation which, if not avoided, could WARNING result in death or serious injuries.
BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, AND THE LIKE) ARISING OUT OF THE USE OR INABILITY TO USE THE SOFTWARE EVEN IF BROTHER’S LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME STATES IN THE USA AND SOME PROVINCES IN CANADA DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
Intel is a trademark of Intel Corporation in the U.S. and/or other countries. Evernote is a trademark of Evernote Corporation and used under a license. The Bluetooth word mark is owned by the Bluetooth SIG, Inc. and any use of such marks by Brother Industries, Ltd. is under license.
2008 in this document represents Windows Server 2008 and Windows Server 2008 R2. • In this User's Guide, the LCD messages of the HL-L8360CDW are used unless otherwise specified. • In this User's Guide, the illustrations of the HL-L8360CDW are used unless otherwise specified. •...
Home > Introduction to Your Brother Machine Introduction to Your Brother Machine • Before Using Your Machine • Front View and Back View • Control Panel Overview • Touchscreen LCD Overview • How to Navigate the Touchscreen LCD • ®...
Home > Introduction to Your Brother Machine > Before Using Your Machine Before Using Your Machine Before attempting any printing operation, confirm the following: • Make sure you have installed the printer driver. • For USB or network cable users: Make sure the interface cable is physically secure.
Home > Introduction to Your Brother Machine > Front View and Back View Front View and Back View HL-L8260CDW Front View Back View 1. Face down output tray support flap (support flap) 2. Face down output tray 3. Front cover release button 4.
Page 14
8. Touch panel with a tiltable Touchscreen LCD 9. USB port 10. (For wired network models) 10BASE-T / 100BASE-TX / 1000BASE-T port 11. AC power connector / cord 12. Back cover (Face up output tray) Related Information • Introduction to Your Brother Machine...
Home > Introduction to Your Brother Machine > Control Panel Overview Control Panel Overview The control panel may vary depending on your model. HL-L8260CDW 1. Liquid Crystal Display (LCD) Displays messages to help you set up and use the machine.
Page 16
Press to configure a wireless network. When the WiFi light is on, your Brother machine is connected to a wireless access point. When the WiFi light blinks, the wireless connection is down, or your machine is in the process of connecting to a wireless...
Page 17
HL-L8360CDW/HL-L8360CDWT 1. Touchscreen Liquid Crystal Display (LCD) Access menus and options by pressing them on the Touchscreen. 2. Menu buttons (Back) Press to go back to the previous menu. (Home) Press to return to the Home screen. (Cancel) Press to cancel an operation.
Page 18
Related Information • Introduction to Your Brother Machine...
Displays the remaining toner life. Press to access the [Toner] menu. [Settings] Press to access the [Settings] menu. Use the Settings menu to access all of your Brother machine's settings. If Setting Lock has been turned on, a lock icon appears on the LCD. You must unlock the machine to change any settings.
Page 20
The warning icon appears when there is an error or maintenance message; press to view it, and then press to return to Ready Mode. NOTE This product adopts the font of ARPHIC TECHNOLOGY CO.,LTD. Related Information • Introduction to Your Brother Machine...
Home > Introduction to Your Brother Machine > How to Navigate the Touchscreen LCD How to Navigate the Touchscreen LCD Related Models: HL-L8360CDW/HL-L8360CDWT Press your finger on the LCD to operate it. To display and access all the options, press a or b on the LCD to scroll through them.
Page 22
5. Press[Med]. 6. Press Related Information • Introduction to Your Brother Machine...
Introduction to Your Brother Machine > Access Brother Utilities (Windows ® Access Brother Utilities (Windows Brother Utilities is an application launcher that offers convenient access to all Brother applications installed on your computer. 1. Do one of the following: ®...
Page 24
Related Information • Introduction to Your Brother Machine ® • Uninstall the Brother Software and Drivers (Windows...
® ® • (Windows 8 and Windows Server 2012) Tap or click (Brother Utilities) either on the Start screen or the desktop. ® ® • (Windows 8.1 and Windows Server 2012 R2) Move your mouse to the lower left corner of the Start screen and click (if you are using a touch- based device, swipe up from the bottom of the Start screen to bring up the Apps screen).
Home > Paper Handling > Load Paper > Load and Print Using the Paper Tray Load and Print Using the Paper Tray • Load Paper in the Paper Tray • Printing Problems • Error and Maintenance Messages...
Page 29
Home > Paper Handling > Load Paper > Load and Print Using the Paper Tray > Load Paper in the Paper Tray Load Paper in the Paper Tray • If the Check Size setting is set to On and you pull the paper tray out of the machine, a message appears on the LCD asking if you want to change the paper size and paper type.
Page 30
7. Lift the support flap to prevent paper from sliding off the output tray. Related Information • Load and Print Using the Paper Tray • Change Machine Settings to Print on Letterhead or Preprinted Paper Using the Paper Tray...
Page 31
• face up • bottom edge toward the front of the paper tray >> HL-L8260CDW >> HL-L8360CDW/HL-L8360CDWT HL-L8260CDW 1. Press a or b to select the following: a. Select [Printer]. Press OK. b. Select [2-sided]. Press OK. c. Select [Single Image]. Press OK.
Home > Paper Handling > Load Paper > Load and Print Using the Multi‑purpose Tray (MP Tray) Load and Print Using the Multi‑purpose Tray (MP Tray) You can load letterhead, colored paper, thin paper, thick paper, recycled paper, bond paper, labels, glossy paper, up to 50 sheets of plain paper, or up to ten envelopes in the MP tray.
Page 33
Home > Paper Handling > Load Paper > Load and Print Using the Multi‑purpose Tray (MP Tray) > Load Paper in the Multi‑purpose Tray (MP Tray) Load Paper in the Multi‑purpose Tray (MP Tray) When you load a different size and type of paper in the tray, you must also change the Paper Size and Paper Type settings in the machine, or on your computer.
Page 34
• Make sure the paper is below the maximum paper mark (1). • Place the paper's leading edge (top of paper) between the and b arrows (2). • When using glossy paper, load only one sheet at a time in the MP tray to avoid a paper jam. •...
Page 35
For automatic 2-sided printing (long edge binding) • face down • bottom edge first >> HL-L8260CDW >> HL-L8360CDW/HL-L8360CDWT HL-L8260CDW 1. Press a or b to select the following: a. Select [Printer]. Press OK. b. Select [2-sided]. Press OK. c. Select [Single Image]. Press OK.
Page 36
Home > Paper Handling > Load Paper > Load and Print Using the Multi‑purpose Tray (MP Tray) > Load and Print Labels Using the MP Tray Load and Print Labels Using the MP Tray When the back cover (face up output tray) is pulled down, the machine has a straight paper path from the MP tray through to the back of the machine.
Page 37
• Make sure the paper is below the maximum paper mark (1). • Place the paper's leading edge (top of paper) between the and b arrows (2). 6. Change your print preferences in the Print screen before sending the print job from your computer. 7.
Page 38
Home > Paper Handling > Load Paper > Load and Print Using the Multi‑purpose Tray (MP Tray) > Load and Print Envelopes Using the MP Tray Load and Print Envelopes Using the MP Tray You can load up to ten envelopes in the MP tray. Before loading, press the corners and sides of the envelopes to make them as flat as possible.
Page 39
6. Load paper with the printing surface face up in the MP tray. • Load up to 10 envelopes in the MP tray with the printing surface face up. Make sure the envelopes are below the maximum paper mark (1). Loading more than 10 envelopes may cause paper jams. •...
When you change the size and type of the paper you load in the tray, you must change the Paper Size and Paper Type settings on the LCD at the same time. >> HL-L8260CDW >> HL-L8360CDW/HL-L8360CDWT HL-L8260CDW 1. Press a or b to select the following: a.
MP tray, asking if you changed the paper size and paper type. The default setting is On. >> HL-L8260CDW >> HL-L8360CDW/HL-L8360CDWT HL-L8260CDW 1. Press a or b to select the following: a. Select [General Setup]. Press OK.
Home > Paper Handling > Unprintable Area Unprintable Area The measurements in the table below show maximum unprintable areas from the edges of the most commonly- used paper sizes. The measurements may vary depending on the paper size or settings in the application you are using.
Home > Paper Handling > Recommended Print Media Recommended Print Media To get the best print quality, we recommend using the paper listed in the table. Paper Type Item Plain Paper Xerox Vitality Multipurpose Printer Paper, 20 lb (20 lb = 75 g/m Hammermill Laser Print (24 lb = 90 g/m Recycled Paper...
• that is designed for inkjet printing If you use any of the types of paper listed above, they may damage your machine. This damage is not covered under any Brother warranty or service agreement. Related Information • Paper Handling...
® Print a Document (Windows 1. Select the print command in your application. 2. Select Brother XXX-XXXX (where XXXX is the name of your model), and then click the printing properties or preferences button. The printer driver window appears. 3. Make sure you have loaded the correct size paper in the paper tray.
Page 49
Related Information ® • Print from Your Computer (Windows ® • Print Settings (Windows...
® ® Home > Print > Print from Your Computer (Windows > Print Settings (Windows ® Print Settings (Windows Basic Tab 1. Paper Size Select the size of the paper you want to use. You can either choose from standard paper sizes or create a custom paper size.
Page 51
5. Print Quality Select the print resolution you want. Because print quality and speed are related, the higher the quality, the longer it will take to print the document. 6. Color / Mono Select the Color/Mono settings to use. NOTE •...
Page 52
2-sided Settings button Click this button to select the type of 2-sided binding. Four types of 2-sided bindings are available for each orientation. 10. Paper Source Select the paper source setting according to your print conditions or purpose. First Page Select the paper source to use for printing the first page.
Page 53
2. Reverse Print Select this option to rotate the printed image 180 degrees. 3. Use Watermark Select this option to print a logo or text on your document as a watermark. Select one of the preset watermarks, add a new watermark, or use an image file you have created. 4.
>> HL-L8360CDW/HL-L8360CDWT HL-L8260CDW 1. Select the print command in your application. 2. Select Brother XXX-XXXX (where XXXX is the name of your model), and then click the printing properties or preferences button. The printer driver window appears. 3. Click the Advanced tab.
Page 55
You must set a separate password for each document. 7. Type the User Name and Job Name in the text field, if needed. 8. Click OK, to close the Secure Print Settings window. 9. Click OK. 10. Complete your print operation. 11.
Click Control Panel on the Start screen. In the Hardware group, click View devices and printers. 2. Right-click the Brother XXX-XXXX icon (where XXXX is your model name), and then select Printer properties. If printer driver options appear, select your printer driver.
Page 57
Click Control Panel on the Start screen. In the Hardware group, click View devices and printers. 2. Right-click the Brother XXX-XXXX icon (where XXXX is your model name), and then select Printer properties. If printer driver options appear, select your printer driver.
Select Machine section, and then select the PS Driver check box. 1. Select the print command in your application. 2. Select Brother XXX-XXXX BR-Script3 (where XXXX is the name of your model), and then click the printing properties or preferences button.
® (Windows 8 and Windows Server 2012) Click (Brother Utilities), and then click the drop-down list and select your model name (if not already selected). Click Tools in the left navigation bar, and then click Status Monitor. ® ® (Windows 8.1 and Windows Server...
Home > Print > Print from Your Computer (Macintosh) Print from Your Computer (Macintosh) • Print a Document (Macintosh) • Print Options (Macintosh) • Secure Print (Macintosh) • ® ™ Print a Document Using the BR-Script3 Printer Driver (PostScript language emulation) (Macintosh) •...
1. Make sure you have loaded the correct size paper in the paper tray. 2. From an application, such as Apple TextEdit, click the File menu, and then select Print. 3. Select Brother XXX-XXXX (where XXXX is your model name). 4. Type the number of copies you want in the Copies field.
Home > Print > Print from Your Computer (Macintosh) > Print Options (Macintosh) Print Options (Macintosh) Page Setup 1. Paper Size Select the size of the paper you want to use. You can either choose from standard paper sizes or create a custom paper size.
Page 63
Layout 1. Pages per Sheet Select the number of pages to print on a single sheet of paper. 2. Layout Direction Select the page order when printing multiple pages on a single sheet of paper. 3. Border Select the type of border to use when printing multiple pages on a single sheet of paper. 4.
Page 64
Paper Handling 1. Collate pages Select this option to print sets of multi-page documents in the original page order. When this option is selected, one complete copy of your document will print, and then reprint according to the number of copies you choose.
Page 65
Print Settings 1. Media Type Select the type of media you want to use. To achieve the best print results, the machine automatically adjusts its print settings according to the selected media type. 2. Print Quality Select the print resolution you want. Because print quality and speed are related, the higher the quality, the longer it will take to print the document.
Page 66
Quiet Mode Select this option to reduce printing noise. Other Print Options Skip Blank Page Select this option to allow the printer driver to automatically detect blank pages and exclude them from printing. Color Settings 1. Color Mode Select the color mode to suit your preference. 2.
Page 67
Secure Print 1. Secure Print This feature ensures that confidential or sensitive documents do not print until you enter a password on the machine's control panel. Related Information • Print from Your Computer (Macintosh) • Print a Document (Macintosh)
1. From an application, such as Apple TextEdit, click the File menu, and then select Print. 2. Select Brother XXX-XXXX (where XXXX is your model name). 3. Click the application pop-up menu, and then select the Secure Print option. The Secure Print options appear.
Page 69
After you have printed the secured data, it will be cleared from the machine's memory. Related Information • Print from Your Computer (Macintosh)
(Macintosh) ® The BR-Script3 printer driver lets you print PostScript data more clearly. • Go to your model's Downloads page on the Brother Solutions Center at support.brother.com to download the PS driver (BR-Script3 printer driver). • Make sure you have added the BR-Script3 printer driver from Print & Scan or Printers & Scanners in the System Preferences list on your Macintosh.
To view the latest machine status while the Status Monitor window is open, click the icon. You can set the interval at which the software updates machine status information. Click Brother Status Monitor in the menu bar, and then select Preferences.
Page 72
Related Information • Print from Your Computer (Macintosh) • Printing Problems • Calibrate Color Output...
Home > Print > Cancel a Print Job Cancel a Print Job >> HL-L8260CDW >> HL-L8360CDW/HL-L8360CDWT HL-L8260CDW 1. Press Cancel. To cancel multiple print jobs, press and hold Cancel for four seconds. HL-L8360CDW/HL-L8360CDWT 1. Press To cancel multiple print jobs, press and hold for four seconds.
> Test Print Test Print If there are problems with print quality, follow these instructions to do a test print: >> HL-L8260CDW >> HL-L8360CDW/HL-L8360CDWT HL-L8260CDW 1. Press a or b to select the following: a. Select [Printer]. Press OK. b. Select [Print Options]. Press OK.
Home > Print Data Directly from a USB Flash Drive Print Data Directly from a USB Flash Drive You can print photos directly from digital camera media or a USB flash drive. Supported file types are PDF, JPEG, TIFF, XPS, and PRN. •...
Home > Print Data Directly from a USB Flash Drive > Compatible USB Flash Drives Compatible USB Flash Drives IMPORTANT The USB direct interface supports only USB flash drives and digital cameras that use the USB mass storage standard. Other USB devices are not supported. Compatible USB Flash Drives USB Class USB Mass Storage Class...
To prevent damage to your machine, DO NOT connect any device other than a digital camera or USB flash drive to the USB direct interface. USB port location (Front View) >> HL-L8260CDW >> HL-L8360CDW/HL-L8360CDWT HL-L8260CDW 1. Connect your USB flash drive or digital camera to the USB direct interface. •...
Page 78
DO NOT remove the USB flash drive or digital camera from the USB direct interface until the machine has finished printing. 6. Press Cancel. HL-L8360CDW/HL-L8360CDWT 1. Connect your USB flash drive or digital camera to the USB direct interface. The LCD displays the [Checking Image] message.
Page 79
IMPORTANT DO NOT remove the USB flash drive or digital camera from the USB direct interface until the machine has finished printing. Related Information • Print Data Directly from a USB Flash Drive...
® Home > Print Data Directly from a USB Flash Drive > Create a PRN File for Direct Printing (Windows ® Create a PRN File for Direct Printing (Windows These instructions may vary depending on your print application and operating system. 1.
Home > Network Network • Supported Basic Network Features • Network Management Software and Utilities • Additional Methods of Configuring Your Brother Machine for a Wireless Network • Advanced Network Features • Technical Information for Advanced Users...
Status Monitor Driver Deployment Wizard Vertical Pairing • Go to your model's Downloads page on the Brother Solutions Center at support.brother.com download the latest version of Brother's BRAdmin Light. • Go to your model's Downloads page on the Brother Solutions Center at support.brother.com...
Home > Network > Network Management Software and Utilities Network Management Software and Utilities Configure and change your Brother machine's network settings using a management utility. • Learn about Network Management Software and Utilities • Change Machine Settings from Your Computer •...
LAN. BRAdmin Professional 3 can also log activity of Brother devices on your network and export the log data. For users who want to monitor locally-connected machines, install the Print Auditor Client software on the client computer. This utility allows you to use BRAdmin Professional 3 to monitor machines that are connected to a client computer via the USB interface.
> Additional Methods of Configuring Your Brother Machine for a Wireless Network Additional Methods of Configuring Your Brother Machine for a Wireless Network To connect your machine to your wireless network, we recommend using the Brother installation disc. • Before Configuring Your Brother Machine for a Wireless Network •...
• Although the Brother machine can be used in both a wired and wireless network (supported models only), only one connection method can be used at a time. However, a wireless network connection and Wi-Fi Direct connection, or a wired network connection (supported models only) and Wi-Fi Direct connection can be used at the same time.
For Windows , follow these instructions: • For Macintosh, click Driver Download to go to the Brother Solutions Center. Follow the on-screen instructions to install printer drivers. 2. The opening screen appears automatically. Choose your language, and then follow the on-screen instructions.
If your wireless device is connected successfully, the machine's LCD displays [Connected]. You have completed the wireless network setup. To install drivers and software necessary for operating your device, insert the Brother installation disc into your computer or go to your model's Downloads page on the Brother Solutions Center at support.brother.com.
Page 89
Related Information • Additional Methods of Configuring Your Brother Machine for a Wireless Network • Wireless LAN Report Error Codes...
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless ™ Network > Configure Your Machine for a Wireless Network Using the PIN Method of Wi-Fi Protected Setup (WPS) Configure Your Machine for a Wireless Network Using the PIN Method ™...
Page 91
Routers or access points that support WPS are marked with this symbol: >> HL-L8260CDW >> HL-L8360CDW/HL-L8360CDWT HL-L8260CDW 1. Press a or b to select the [Network] option, and then press OK. 2. Press a or b to select the [WLAN] option, and then press OK.
Page 92
If your wireless device is connected successfully, the machine's LCD displays [Connected]. You have completed the wireless network setup. To install drivers and software necessary for operating your device, insert the Brother installation disc into your computer or go to your model's Downloads page on the Brother Solutions Center at support.brother.com.
Page 93
If your wireless device is connected successfully, the machine's LCD displays [Connected]. You have completed the wireless network setup. To install drivers and software necessary for operating your device, insert the Brother installation disc into your computer or go to your model's Downloads page on the Brother Solutions Center at support.brother.com.
WEP key only. • If you need assistance during setup and want to contact Brother Customer Service, make sure you have your SSID (Network Name) and Network Key ready. We cannot assist you in locating this information.
Page 95
If your wireless device is connected successfully, the machine's LCD displays [Connected]. You have completed the wireless network setup. To install drivers and software necessary for operating your device, insert the Brother installation disc into your computer or go to your model's Downloads page on the Brother Solutions Center at support.brother.com.
Page 96
If your wireless device is connected successfully, the machine's LCD displays [Connected]. You have completed the wireless network setup. To install drivers and software necessary for operating your device, insert the Brother installation disc into your computer or go to your model's Downloads page on the Brother Solutions Center at support.brother.com.
WPA2-PSK 12345678 If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother machine supports the use of the first WEP key only. 2. Press a or b to select the [Network] option, and then press OK.
Page 98
If your wireless device is connected successfully, the machine's LCD displays [Connected]. You have completed the wireless network setup. To install drivers and software necessary for operating your device, insert the Brother installation disc into your computer or go to your model's Downloads page on the Brother Solutions Center at support.brother.com.
Page 99
If your wireless device is connected successfully, the machine's LCD displays [Connected]. You have completed the wireless network setup. To install drivers and software necessary for operating your device, insert the Brother installation disc into your computer or go to your model's Downloads page on the Brother Solutions Center at support.brother.com.
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Configure Your Machine for an Enterprise Wireless Network Configure Your Machine for an Enterprise Wireless Network >> HL-L8260CDW >> HL-L8360CDW/HL-L8360CDWT HL-L8260CDW Before configuring your machine, we recommend writing down your wireless network settings. You will need this information before you continue with the configuration.
Page 101
• If you configure your machine using EAP-TLS authentication, you must install the client certificate issued by a CA before you start configuration. Contact your network administrator about the client certificate. If you have installed more than one certificate, we recommend writing down the certificate name you want to use.
Page 102
You have completed the wireless network setup. To install drivers and software necessary for operating your device, insert the Brother installation disc into your computer or go to your model's Downloads page on the Brother Solutions Center at support.brother.com. HL-L8360CDW/HL-L8360CDWT Before configuring your machine, we recommend writing down your wireless network settings.
Page 103
If your wireless device is connected successfully, the machine's LCD displays [Connected]. You have completed the wireless network setup. To install drivers and software necessary for operating your device, insert the Brother installation disc into your computer or go to your model's Downloads page on the Brother Solutions Center at support.brother.com.
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Use ® Wi-Fi Direct ® Use Wi-Fi Direct • Print from Your Mobile Device Using Wi-Fi Direct • Configure Your Wi-Fi Direct Network •...
Page 106
Wi-Fi Direct is one of the wireless configuration methods developed by the Wi-Fi Alliance . It allows you to ™ configure a secured wireless network between your Brother machine and a mobile device, such as an Android ® device, Windows device, iPhone, iPod touch, or iPad, without using an access point.
Page 107
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > ® Wi-Fi Direct > Configure Your Wi-Fi Direct Network Configure Your Wi-Fi Direct Network Configure your Wi-Fi Direct network settings from your machine's control panel.
Page 108
Method of Wi-Fi Protected Setup (WPS). To use Brother iPrint&Scan functionality in a Wi-Fi Direct network configured by one-push configuration using Wi- Fi Direct or by PIN Method configuration using Wi-Fi Direct, the device you use to configure Wi-Fi Direct must be ™...
Page 109
• When your Brother machine is not the G/O, it will display available device names with which to configure a Wi-Fi Direct network. Press a or b to select the mobile device you want to connect to and press OK.
Page 110
Related Information • Configure Your Wi-Fi Direct Network • Wi-Fi Direct Network Configuration Overview...
Page 111
8. If your mobile device connects successfully, the machine's LCD displays [Connected]. You have completed the Wi-Fi Direct network setup. The Mobile Print/Scan Guide for Brother iPrint&Scan contains information on printing from your mobile device. Go to your model's Manuals page on the Brother Solutions Center at support.brother.com to see the guide.
Page 112
• Wi-Fi Direct Network Configuration Overview...
Page 113
Press b to enter a PIN displayed by your mobile device in the machine. Press OK, and then go to the next step. If your mobile device does not display a PIN, press Cancel on your Brother machine. Go back to the first step and try again.
Page 114
3. Do one of the following: • When your Brother machine is the Group Owner (G/O), it will wait for a connection request from your mobile device. When [PIN Code] appears, enter the PIN displayed on your mobile device in the machine.
Page 115
10. If your mobile device connects successfully, the machine's LCD displays [Connected]. You have completed the Wi-Fi Direct network setup. The Mobile Print/Scan Guide for Brother iPrint&Scan contains information on printing from your mobile device. Go to your model's Manuals page on the Brother Solutions Center at support.brother.com to see the guide.
Page 116
Go to your model's Manuals page on the Brother Solutions Center at support.brother.com to see the guide. Related Information • Configure Your Wi-Fi Direct Network • Wi-Fi Direct Network Configuration Overview...
Page 117
6. If your mobile device connects successfully, the machine's LCD displays [Connected]. You have completed the Wi-Fi Direct network setup. The Mobile Print/Scan Guide for Brother iPrint&Scan contains information on printing from your mobile device. Go to your model's Manuals page on the Brother Solutions Center at support.brother.com to see the guide.
Home > Network > Advanced Network Features Advanced Network Features • Print the Network Configuration Report • Print the WLAN Report • Configure the SNTP Protocol Using Web Based Management...
The machine prints the Network Configuration Report. 3. Press Related Information • Advanced Network Features • Where Can I Find My Brother Machine's Network Settings? ® • Use the Network Connection Repair Tool (Windows • Access Web Based Management •...
Related Information • Advanced Network Features • Wireless LAN Report Error Codes • My Brother Machine Cannot Print over the Network • I Want to Check that My Network Devices are Working Correctly...
Page 121
• If your WLAN access point/router is using MAC address filtering, confirm that the MAC address of the Brother machine is allowed in the filter. 2. If you manually entered the SSID and security information (SSID/authentication method/ encryption method/Network Key), the information may be incorrect.
Page 122
Try starting again after few minutes in order to avoid effects from other access points. Related Information • Print the WLAN Report • My Brother Machine Cannot Print over the Network • I Want to Check that My Network Devices are Working Correctly ™ •...
5. Click the Protocol menu in the left navigation bar. 6. Select the SNTP check box to activate the settings. 7. Click Submit. 8. Restart your Brother machine to activate the configuration. 9. Next to the SNTP check box, click Advanced Settings and follow the instructions below: Option...
Page 124
Option Description Primary SNTP Server Type the server address (up to 64 characters). Address The secondary SNTP server address is used as a backup to the primary Secondary SNTP Server SNTP server address. If the primary server is unavailable, the machine will Address contact the secondary SNTP server.
Home > Network > Technical Information for Advanced Users Technical Information for Advanced Users • Gigabit Ethernet (Wired Network Only) • Reset the Network Settings to the Factory Settings...
Home > Network > Technical Information for Advanced Users > Gigabit Ethernet (Wired Network Only) Gigabit Ethernet (Wired Network Only) Your machine supports 1000BASE-T Gigabit Ethernet. To connect to a 1000BASE-T Gigabit Ethernet Network, you must set the machine’s Ethernet link mode to Auto from the machine’s control panel or Web Based Management (web browser).
Page 127
Home > Network > Technical Information for Advanced Users > Gigabit Ethernet (Wired Network Only) > Configure the Gigabit Ethernet Settings Using Web Based Management Configure the Gigabit Ethernet Settings Using Web Based Management 1. Start your web browser. 2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).
You can also reset the print server to its factory settings using BRAdmin Light, BRAdmin Professional 3, or Web Based Management. >> HL-L8260CDW >> HL-L8360CDW/HL-L8360CDWT HL-L8260CDW 1. Press a or b to select the [Network] option, and then press OK.
Lock the Machine Settings Before turning on the machine's Access Lock, make a careful note of your password. If you forget the password, you must reset all passwords stored in the machine by contacting your administrator or Brother Customer Service.
Home > Security > Lock the Machine Settings > Setting Lock Overview Setting Lock Overview Use the Setting Lock feature to block unauthorized access to machine settings. When Setting Lock is set to On, you cannot access the machine settings without entering the password. •...
Page 132
Setting Lock Overview > Set the Setting Lock Password Set the Setting Lock Password >> HL-L8260CDW >> HL-L8360CDW/HL-L8360CDWT HL-L8260CDW 1. Press a or b to select the following: a. Select [General Setup]. Press OK. b. Select [Setting Lock]. Press OK.
Page 133
Setting Lock Overview > Change the Setting Lock Password Change the Setting Lock Password >> HL-L8260CDW >> HL-L8360CDW/HL-L8360CDWT HL-L8260CDW 1. Press a or b to select the following: a. Select [General Setup]. Press OK. b. Select [Setting Lock]. Press OK.
Page 134
> Setting Lock Overview > Turn On Setting Lock Turn On Setting Lock >> HL-L8260CDW >> HL-L8360CDW/HL-L8360CDWT HL-L8260CDW 1. Press a or b to select the following: a. Select [General Setup]. Press OK. b. Select [Setting Lock]. Press OK. 2. Press OK when the LCD displays [On].
Home > Security > Network Security Features Network Security Features • Before Using Network Security Features • Secure Function Lock 3.0 • ® Use Active Directory Authentication • Use LDAP Authentication • Manage Your Network Machine Securely Using SSL/TLS • Manage Your Network Machine Securely Using IPsec •...
> Before Using Network Security Features Before Using Network Security Features Your Brother machine employs some of the latest network security and encryption protocols available today. These network features can be integrated into your overall network security plan to help protect your data and prevent unauthorized access to the machine.
Security > Network Security Features > Secure Function Lock 3.0 Secure Function Lock 3.0 Brother's Secure Function Lock 3.0 increases security by restricting the functions available on your Brother machine. • Before Using Secure Function Lock 3.0 • Configure Secure Function Lock 3.0 Using Web Based Management •...
Page 138
• Print ™ Print includes print jobs sent via AirPrint, Google Cloud Print and Brother iPrint&Scan. If you register users' login names in advance, the users do not need to enter their passwords when they use the print function. •...
Page 139
Home > Security > Network Security Features > Secure Function Lock 3.0 > Configure Secure Function Lock 3.0 Using Web Based Management Configure Secure Function Lock 3.0 Using Web Based Management 1. Start your web browser. 2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).
Page 140
™ Public Mode includes print jobs sent via AirPrint, Google Cloud Print and Brother iPrint&Scan. 1. Start your web browser. 2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).
Page 141
Home > Security > Network Security Features > Secure Function Lock 3.0 > Additional Secure Function Lock 3.0 Features Additional Secure Function Lock 3.0 Features Configure the following features in the Secure Function Lock screen: All Counter Reset Click All Counter Reset, in the Page Counters column, to reset the page counter. Export to CSV file Click Export to CSV file, to export the current page counter including User List / Restricted Functions information as a CSV file.
Page 142
4. Touch a new ID Card to the NFC symbol. 5. Press [OK]. The new ID Card's number is registered to the machine. For the supported ID Card types, go to the Brother Solutions Center at support.brother.com to see the FAQs &...
® Home > Security > Network Security Features > Use Active Directory Authentication ® Use Active Directory Authentication • ® Introduction to Active Directory Authentication • ® Configure Active Directory Authentication Using Web Based Management • Log On to Change the Machine Settings Using the Machine's Control Panel (Active ®...
Page 144
Related Models: HL-L8360CDW/HL-L8360CDWT ® ® Active Directory Authentication restricts the use of your Brother machine. If Active Directory Authentication is enabled, the machine's control panel will be locked. You cannot change the machine's settings until you enter a User ID and password.
Page 145
Select this option to store incoming print data. After you log on to the machine, your PC print jobs will be printed automatically. This feature is available only for print data created by a Brother native printer driver. Remember User ID Select this option to save your User ID.
Page 146
Log On to Change the Machine Settings Using the Machine's Control ® Panel (Active Directory Authentication) Related Models: HL-L8360CDW/HL-L8360CDWT ® When Active Directory Authentication is enabled, the machine's control panel will be locked until you enter your User ID and password on the machine's control panel.
Home > Security > Network Security Features > Use LDAP Authentication Use LDAP Authentication • Introduction to LDAP Authentication • Configure LDAP Authentication Using Web Based Management • Log On to Change the Machine Settings Using the Machine's Control Panel (LDAP Authentication)
Page 148
Introduction to LDAP Authentication Related Models: HL-L8360CDW/HL-L8360CDWT LDAP Authentication restricts the use of your Brother machine. If LDAP Authentication is enabled, the machine's control panel will be locked. You cannot change the machine's settings until you enter a User ID and password.
Page 149
Select this option to store incoming print data. After you log on to the machine, your PC print jobs will be printed automatically. This feature is available only for print data created by a Brother native printer driver. Remember User ID Select this option to save your User ID.
Page 150
Log On to Change the Machine Settings Using the Machine's Control Panel (LDAP Authentication) Related Models: HL-L8360CDW/HL-L8360CDWT When LDAP Authentication is enabled, the machine's control panel will be locked until you enter your User ID and password on the machine's control panel.
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/TLS Manage Your Network Machine Securely Using SSL/TLS • Introduction to SSL/TLS • Certificates and Web Based Management • Manage Your Network Machine Securely Using Web Based Management •...
Page 152
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ > Introduction to SSL/TLS Introduction to SSL/TLS Secure Socket Layer (SSL) or Transport Layer Security (TLS) is an effective method of protecting data sent over a local or wide area network (LAN or WAN).
Page 153
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ > Introduction to SSL/TLS > Brief History of SSL/TLS Brief History of SSL/TLS SSL/TLS was originally created to secure web traffic information, particularly data sent between web browsers ®...
Page 154
Benefits of Using SSL/TLS The primary benefit of using SSL/TLS on Brother machines is to guarantee secure printing over an IP network by restricting unauthorized users from reading data sent to the machine. SSL's key selling point is that it can be used to print confidential data securely.
Page 155
Manage Your Network Machine Securely Using SSL/ > Certificates and Web Based Management Certificates and Web Based Management You must configure a certificate to manage your networked Brother machine securely using SSL/TLS. You must use Web Based Management to configure a certificate. •...
Page 156
> Supported Security Certificate Features Supported Security Certificate Features Your Brother machine supports the use of multiple security certificates, which allows secure management, authentication, and communication with the machine. The following security certificate features can be used with the machine: •...
Page 157
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ > Certificates and Web Based Management > Create and Install a Certificate Create and Install a Certificate • Step by Step Guide for Creating and Installing a Certificate •...
Page 158
Certificate from a CA 1. Create a Certificate Signing Request (CSR) using Web Based Management. 2. Install the certificate issued by the CA on your Brother machine using Web Based Management. 3. Install the certificate on your computer. Related Information •...
Page 159
> Create and Install a Self- signed Certificate Create and Install a Self-signed Certificate • Create a Self-signed Certificate • ® Install the Self-signed Certificate for Windows users with Administrator Rights • Import and Export the Self-signed Certificate on your Brother Machine...
Page 160
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ > Certificates and Web Based Management > Create and Install a Certificate > Create and Install a Self- signed Certificate > Create a Self-signed Certificate Create a Self-signed Certificate 1.
Page 161
17. Click Yes to restart your print server. The self-signed certificate is created and saved in your machine's memory. To use SSL/TLS communication, the self-signed certificate must be installed on your computer. Related Information • Create and Install a Self-signed Certificate...
Page 162
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ > Certificates and Web Based Management > Create and Install a Certificate > Create and Install a Self- ® signed Certificate > Install the Self-signed Certificate for Windows users with Administrator Rights ®...
Page 163
4. Click Continue to this website (not recommended). 5. Click Certificate error, and then click View certificates. 6. Click Install Certificate..
Page 164
7. When the Certificate Import Wizard appears, click Next. 8. Select Place all certificates in the following store, and then click Browse..9. Select Trusted Root Certification Authorities, and then click OK. 10. Click Next.
Page 165
11. Click Finish. 12. Click Yes, if the fingerprint (thumbprint) is correct. The fingerprint (thumbprint) is printed on the Network Configuration Report. 13. Click OK. The self-signed certificate is now installed on your computer, and SSL/TLS communication is available. Related Information •...
Page 166
> Import and Export the Self-signed Certificate on your Brother Machine Import and Export the Self-signed Certificate on your Brother Machine You can store the self-signed certificates on your Brother machine and manage them by importing and exporting. • Import the Self-signed Certificate •...
Page 167
Create and Install a Certificate > Create and Install a Self- signed Certificate > Import and Export the Self-signed Certificate on your Brother Machine > Import the Self- signed Certificate Import the Self-signed Certificate 1. Start your web browser. 2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).
Page 168
Create and Install a Certificate > Create and Install a Self- signed Certificate > Import and Export the Self-signed Certificate on your Brother Machine > Export the Self- signed Certificate Export the Self-signed Certificate 1. Start your web browser. 2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).
Page 169
CA, create a Certificate Signing Request (CSR), send it to a CA for authentication, and install the returned certificate on your machine. • Create a Certificate Signing Request (CSR) • Install a Certificate on Your Brother Machine • Import and Export the Certificate and Private Key...
Page 170
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ > Certificates and Web Based Management > Create and Install a Certificate > Create and Install a Certificate from a Certificate Authority (CA) > Create a Certificate Signing Request (CSR) Create a Certificate Signing Request (CSR) A Certificate Signing Request (CSR) is a request sent to a Certificate Authority (CA) to authenticate the credentials contained within the certificate.
Page 171
Web Server for the certificate template to securely create the Client Certificate. If you are creating a Client Certificate for an IEEE 802.1x environment with EAP-TLS authentication, we recommend using User for the certificate template. For more information, go to your model's page on the Brother Solutions Center at support.brother.com. Related Information •...
Page 172
Create and Install a Certificate from a Certificate Authority (CA) > Install a Certificate on Your Brother Machine Install a Certificate on Your Brother Machine When you receive a certificate from a CA, follow the steps below to install it into the print server: Only a certificate issued with your machine's CSR can be installed onto the machine.
Page 173
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ > Certificates and Web Based Management > Create and Install a Certificate > Create and Install a Certificate from a Certificate Authority (CA) > Import and Export the Certificate and Private Key Import and Export the Certificate and Private Key Store the certificate and private key on your machine and manage them by importing and exporting them.
Page 174
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ > Certificates and Web Based Management > Create and Install a Certificate > Create and Install a Certificate from a Certificate Authority (CA) > Import and Export the Certificate and Private Key >...
Page 175
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ > Certificates and Web Based Management > Create and Install a Certificate > Create and Install a Certificate from a Certificate Authority (CA) > Import and Export the Certificate and Private Key >...
Page 176
Create and Install a Certificate > Import and Export a CA Certificate Import and Export a CA Certificate You can import, export and store CA certificates on your Brother machine. • Import a CA Certificate • Export a CA Certificate...
Page 177
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ > Certificates and Web Based Management > Create and Install a Certificate > Import and Export a CA Certificate > Import a CA Certificate Import a CA Certificate 1.
Page 178
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ > Certificates and Web Based Management > Create and Install a Certificate > Import and Export a CA Certificate > Export a CA Certificate Export a CA Certificate 1.
Page 179
In Web Based Management, navigate to the Certificate or CA Certificate screen to view certificate content, delete, or export your certificates. Maximum Number of Certificates Stored UP on Brother Machine Self-signed Certificate or Certificate Issued by a CA CA Certificate We recommend storing one less certificate than allowed, reserving an empty spot in case of certificate expiration.
Page 180
In this mode, the print server uses version 1 and version 2c of the SNMP protocol. You can use all Brother applications in this mode. However, it is not secure since it will not authenticate the user, and data will not be encrypted.
Page 181
In this mode, the print server uses the read-write access of version 3 and the read-only access of version 1 and version 2c of the SNMP protocol. When you use SNMPv3 read-write access and v1/v2c read-only access mode, some Brother applications (such as BRAdmin Light) that access the print server do not work correctly since they authorize the read-only access of version 1 and version 2c.
Page 182
(Windows To use BRAdmin Professional 3 utility, you must: • Use the latest version of BRAdmin Professional 3. Go to your model's Downloads page on the Brother Solutions Center at support.brother.com. • Use Web Based Management with the HTTPS protocol if you use BRAdmin Professional 3 and Web Based Management together.
Page 183
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ > Print Documents Securely Using SSL/TLS Print Documents Securely Using SSL/TLS To print documents securely with IPP protocol, use the IPPS protocol. 1. Start your web browser. 2.
Home > Security > Network Security Features > Manage Your Network Machine Securely Using IPsec Manage Your Network Machine Securely Using IPsec • Introduction to IPsec • Configure IPsec Using Web Based Management • Configure an IPsec Address Template Using Web Based Management •...
Page 185
For IPsec transmissions, the following conditions are necessary: A computer that can communicate using IPsec is connected to the network. Your Brother machine is configured for IPsec communication. The computer connected to your Brother machine is configured for IPsec connections. • IPsec settings The settings that are necessary for connections using IPsec.
Page 186
Home > Security > Network Security Features > Manage Your Network Machine Securely Using IPsec > Configure IPsec Using Web Based Management Configure IPsec Using Web Based Management The IPsec connection conditions are comprised of two Template types: Address and IPsec. You can configure up to 10 connection conditions.
Page 187
In Main mode, the processing speed is slow, but the security is high. In Aggressive mode, the processing speed is faster than Main mode, but the security is lower. 9. In the All Non-IPsec Traffic field, select the action to be taken for non-IPsec packets. When using Web Services, you must select Allow for All Non-IPsec Traffic.
Page 188
Home > Security > Network Security Features > Manage Your Network Machine Securely Using IPsec > Configure an IPsec Address Template Using Web Based Management Configure an IPsec Address Template Using Web Based Management 1. Start your web browser. 2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).
Page 189
For example: 192.168.1.1/24 Because the prefix is specified in the form of a 24-bit subnet mask (255.255.255.0) for 192.168.1.1, the addresses 192.168.1.xxx are valid. 10. Select a Remote IP Address option to specify the IP address conditions for the recipient: •...
Page 190
Home > Security > Network Security Features > Manage Your Network Machine Securely Using IPsec > Configure an IPsec Template Using Web Based Management Configure an IPsec Template Using Web Based Management 1. Start your web browser. 2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).
Page 191
Related Information • Manage Your Network Machine Securely Using IPsec • IKEv1 Settings for an IPsec Template • IKEv2 Settings for an IPsec Template • Manual Settings for an IPsec Template...
Page 192
Home > Security > Network Security Features > Manage Your Network Machine Securely Using IPsec > Configure an IPsec Template Using Web Based Management > IKEv1 Settings for an IPsec Template IKEv1 Settings for an IPsec Template Template Name Type a name for the template (up to 16 characters).
Page 193
Use Prefixed Template Select Custom, IKEv1 High Security or IKEv1 Medium Security. The setting items are different depending on the selected template. The default template differs depending on whether you chose Main or Aggressive for Negotiation Mode on the IPsec configuration screen. Internet Key Exchange (IKE) IKE is a communication protocol that is used to exchange encryption keys in order to carry out encrypted communication using IPsec.
Page 194
Type the time (seconds) and number of kilobytes (KByte) before the IPsec SA will expire. • Encapsulation Mode Select Transport or Tunnel. • Remote Router IP-Address Type the IP address (IPv4 or IPv6) of the remote router. Enter this information only when the Tunnel mode is selected.
Page 195
Home > Security > Network Security Features > Manage Your Network Machine Securely Using IPsec > Configure an IPsec Template Using Web Based Management > IKEv2 Settings for an IPsec Template IKEv2 Settings for an IPsec Template Template Name Type a name for the template (up to 16 characters).
Page 196
Use Prefixed Template Select Custom, IKEv2 High Security, or IKEv2 Medium Security. The setting items are different depending on the selected template. Internet Key Exchange (IKE) IKE is a communication protocol that is used to exchange encryption keys in order to carry out encrypted communication using IPsec.
Page 197
SA (Security Association) is an encrypted communication method using IPsec or IPv6 that exchanges and shares information, such as the encryption method and encryption key, in order to establish a secure communication channel before communication begins. SA may also refer to a virtual encrypted communication channel that has been established.
Page 198
Related Information • Configure an IPsec Template Using Web Based Management...
Page 199
Home > Security > Network Security Features > Manage Your Network Machine Securely Using IPsec > Configure an IPsec Template Using Web Based Management > Manual Settings for an IPsec Template Manual Settings for an IPsec Template Template Name Type a name for the template (up to 16 characters). Use Prefixed Template Select Custom.
Page 200
Select Manual. Authentication Key (ESP,AH) Specify the key to use for authentication. Type the In/Out values. These settings are necessary when Custom is selected for Use Prefixed Template, Manual is selected for Internet Key Exchange (IKE), and a setting other than None is selected for Hash for Encapsulating Security section.
Page 201
ESP is a protocol for carrying out encrypted communication using IPsec. ESP encrypts the payload (communicated contents) and adds additional information. The IP packet is comprised of the header and the encrypted payload, which follows the header. In addition to the encrypted data, the IP packet also includes information regarding the encryption method and encryption key, the authentication data, and so on.
Home > Security > Network Security Features > Send an Email Securely Send an Email Securely • Configure Email Sending Using Web Based Management • Send an Email with User Authentication • Send an Email Securely Using SSL/TLS...
Page 203
Home > Security > Network Security Features > Send an Email Securely > Configure Email Sending Using Web Based Management Configure Email Sending Using Web Based Management We recommend using Web Based Management to configure secured email sending with user authentication, or email sending using SSL/TLS.
Page 204
Authentication Send an Email with User Authentication Your Brother machine supports the SMTP-AUTH method to send email via an email server that requires user authentication. This method prevents unauthorized users from accessing the email server. You can use the SMTP-AUTH method for email notification and email reports.
Page 205
SSL/TLS Send an Email Securely Using SSL/TLS Your Brother machine supports SSL/TLS methods to send an email via an email server that requires secure SSL/TLS communication. To send email via an email server that is using SSL/TLS communication, you must configure SMTP over SSL/TLS.
Page 206
You must configure your machine's SMTP communication method to match the method used by your email server. For details about your email server settings, contact your network administrator or your ISP. In most cases, the secured webmail services require the following settings: SMTP Port Server Authentication Method...
Home > Security > Network Security Features > Use IEEE 802.1x Authentication for a Wired or a Wireless Network Use IEEE 802.1x Authentication for a Wired or a Wireless Network • What Is IEEE 802.1x Authentication? • Configure IEEE 802.1x Authentication for a Wired or a Wireless Network Using Web Based Management (Web Browser) •...
Page 208
IEEE 802.1x is an IEEE standard for wired and wireless networks that limits access from unauthorized network devices. Your Brother machine (supplicant) sends an authentication request to a RADIUS server (Authentication server) through your access point or HUB. After your request has been verified by the RADIUS server, your machine can access the network.
Page 209
Home > Security > Network Security Features > Use IEEE 802.1x Authentication for a Wired or a Wireless Network > Configure IEEE 802.1x Authentication for a Wired or a Wireless Network Using Web Based Management (Web Browser) Configure IEEE 802.1x Authentication for a Wired or a Wireless Network Using Web Based Management (Web Browser) •...
Page 210
• To enable IEEE 802.1x authentication for wired networks, select Enabled for Wired 802.1x status on the Wired 802.1x Authentication page. • If you are using EAP-TLS authentication, you must select the client certificate that has been installed (shown with certificate name) for verification from the Client Certificate drop-down list. •...
Page 211
Extensible Authentication Protocol-Flexible Authentication via Secured Tunneling (EAP-FAST) has been developed by Cisco Systems, Inc., which uses a user ID and password for authentication, and symmetric key algorithms to achieve a tunneled authentication process. The Brother machine supports the following inner authentication methods: • EAP-FAST/NONE •...
Home > Security > Network Security Features > Store Print Log to Network Store Print Log to Network • Store Log to Network Overview • Configure the Store Print Log to Network Settings Using Web Based Management • Use the Store Print Log to Network's Error Detection Setting...
Page 213
Store Log to Network Overview The Store Print Log to Network feature allows you to save the print log file from your Brother machine to a network server using the Common Internet File System (CIFS) protocol. You can record the ID, type of print job, job name, user name, date, time and the number of printed pages for every print job.
Page 214
Home > Security > Network Security Features > Store Print Log to Network > Configure the Store Print Log to Network Settings Using Web Based Management Configure the Store Print Log to Network Settings Using Web Based Management 1. Start your web browser. 2.
Page 215
To test your settings, click Yes and then go to the next step. To skip the test, click No. Your settings will be submitted automatically. 10. The machine will test your settings. 11. If your settings are accepted, Test OK appears on the screen. If Test Error appears, check all settings, and then click Submit to display the Test page again.
Page 216
Home > Security > Network Security Features > Store Print Log to Network > Use the Store Print Log to Network's Error Detection Setting Use the Store Print Log to Network's Error Detection Setting Use Error Detection Settings to determine the action that is taken when the print log cannot be stored to the server due to a network error.
Home > Mobile/Web Connect Mobile/Web Connect • Brother Web Connect • Google Cloud Print • AirPrint • ® Mobile Printing for Windows • ® Mopria Print Service • Brother iPrint&Scan • Near-Field Communication (NFC)
> Brother Web Connect Brother Web Connect • Brother Web Connect Overview • Online Services Used with Brother Web Connect • Conditions for Using Brother Web Connect • Set Up Brother Web Connect • Download and Print Documents Using Brother Web Connect...
2. Photos, images, documents and other files 3. Web Service To use Brother Web Connect, your Brother machine must be connected to a network that has access to the Internet, through either a wired or wireless connection. For network setups that use a proxy server, the machine must also be configured to use a proxy server. If you are unsure of your network configuration, check with your network administrator.
Use Brother Web Connect to access services from your Brother machine: To use Brother Web Connect, you must have an account with the online service you want to use. If you do not already have an account, use a computer to access the service's website and create an account.
Page 221
(For Hong Kong, Taiwan and Korea) Brother Web Connect supports only file names written in English. Files named in the local language will not be downloaded. Related Information • Brother Web Connect...
> Conditions for Using Brother Web Connect Conditions for Using Brother Web Connect • Brother Software Installation for Using Brother Web Connect • Configure the Proxy Server Settings Using Your Brother Machine's Control Panel • Configure the Proxy Server Settings Using Web Based Management...
Page 223
Brother machine's software installed. ® For Windows To install the Brother Software and configure the machine to be able to print over your wired or wireless network, see the Quick Setup Guide included with your Brother machine. For Macintosh: To install the Brother Software, go to your model's Downloads page on the Brother Solutions Center at support.brother.com.
Page 224
Brother Web Connect > Conditions for Using Brother Web Connect > Configure the Proxy Server Settings Using Your Brother Machine's Control Panel Configure the Proxy Server Settings Using Your Brother Machine's Control Panel Related Models: HL-L8360CDW/HL-L8360CDWT If your network uses a proxy server, the following proxy server information must be configured on the machine: •...
Page 225
5. Click the Protocol menu in the left navigation bar. 6. Make sure the Proxy check box is selected, and then click Submit. 7. In the Proxy field, click Advanced Settings. 8. Enter the proxy server information. 9. Click Submit. Related Information • Conditions for Using Brother Web Connect...
Set Up Brother Web Connect • Brother Web Connect Setup Overview • Create an Account for Each Online Service Before Using Brother Web Connect • Apply for Brother Web Connect Access • Register an Account on Your Brother Machine for Brother Web Connect...
Page 227
2. Web Service 3. Obtain account Step 2: Apply for Brother Web Connect access. Start Brother Web Connect access using a computer and obtain a temporary ID. 1. Enter account information 2. Brother Web Connect application page 3. Obtain temporary ID Step 3: Register your account information on your machine so you can access the service you want to use.
Page 228
Related Information • Set Up Brother Web Connect...
Page 229
Related Models: HL-L8360CDW/HL-L8360CDWT To use Brother Web Connect to access an online service, you must have an account with that online service. If you do not already have an account, use a computer to access the service's website and create an account.
Page 230
Apply for Brother Web Connect Access Related Models: HL-L8360CDW/HL-L8360CDWT To use Brother Web Connect to access online services, you must first apply for Brother Web Connect access using a computer that has the Brother Software installed. 1. Access the Brother Web Connect application website:...
Page 231
2. Select the service you want to use. The actual screen may differ from the screen shown above. 3. Follow the on-screen instructions and apply for access. When finished, your temporary ID will appear.
Page 232
24 hours. 5. Close the web browser. Now that you have a Brother Web Connect access ID, you must register this ID on your machine, and then use your machine to access the web service you want to use.
Page 233
Register an Account on Your Brother Machine for Brother Web Connect Related Models: HL-L8360CDW/HL-L8360CDWT You must enter your Brother Web Connect account information and configure your machine so that it can use Brother Web Connect to access the service you want.
Page 234
Related Information • Set Up Brother Web Connect • Apply for Brother Web Connect Access...
The Secure Function Lock Page Limit feature applies to the print job using Web Connect. For Hong Kong, Taiwan and Korea Brother Web Connect supports only file names written in English. Files named in the local language will not be downloaded.
Page 236
[OK]. If you want to display this information again, press [Yes]. • Occasionally, updates or announcements about Brother Web Connect's features will appear on the LCD. Read the information, and then press [OK]. 2. Press a or b to display the service that hosts the document you want to download and print. Press the service name.
Home > Mobile/Web Connect > Google Cloud Print Google Cloud Print • Google Cloud Print Overview • Before Using Google Cloud Print • ™ ™ Print from Google Chrome or Chrome OS • ™ Print from Google Drive for Mobile •...
Home > Mobile/Web Connect > Google Cloud Print > Google Cloud Print Overview Google Cloud Print Overview ™ Google Cloud Print is a Google service that allows you to print to a printer registered to your Google account using a network-compatible device (such as a mobile phone or computer) without installing the printer driver on the device.
Home > Mobile/Web Connect > Google Cloud Print > Before Using Google Cloud Print Before Using Google Cloud Print • Network Settings for Using Google Cloud Print • ™ Register Your Machine with Google Cloud Print Using Google Chrome • Register Your Machine with Google Cloud Print Using Web Based Management...
Page 240
™ In order to use Google Cloud Print , your Brother machine must be connected to a network that has access to the Internet, either through a wired or wireless connection. To connect and configure your machine correctly, see the Quick Setup Guide or related topics in this guide.
Page 241
6. When a confirmation message appears on your machine, press the OK button. If the confirmation message does not appear on your machine's LCD, repeat these steps. 7. When your Brother machine is successfully registered, it will appear in the My devices field. Related Information •...
Page 242
Before you begin to register your machine, confirm that the correct date and time are set on the machine. 1. Confirm that your Brother machine is connected to the same network as your computer or mobile device. 2. Start your web browser.
Chrome OS ™ ™ Print from Google Chrome or Chrome OS 1. Make sure your Brother machine is turned on. 2. Open the web page that you want to print. ™ 3. Click the Google Chrome menu icon. 4. Click Print.
Google Cloud Print > Print from Google Drive for Mobile ™ Print from Google Drive for Mobile 1. Make sure your Brother machine is turned on. ™ ™ 2. Access Google Drive from your Android or Apple device’s web browser.
> Print from Gmail Webmail Service for Mobile ™ Print from Gmail Webmail Service for Mobile 1. Make sure your Brother machine is turned on. ™ ™ 2. Access the Gmail webmail service from your Android or Apple device’s web browser.
AirPrint > AirPrint Overview AirPrint Overview Use Brother AirPrint to wirelessly print photos, emails, web pages, and documents from your iPad, iPhone and iPod touch without installing a printer driver on the device. 1. Print request 2. Printed photos, emails, web pages, and documents Related Information •...
Home > Mobile/Web Connect > AirPrint > Before Using AirPrint Before Using AirPrint • Network Settings for Using AirPrint • Disable and Enable AirPrint Using Web Based Management (Web Browser)
Page 249
To configure your Brother machine for a wireless network, see the Quick Setup Guide or related topics in this guide. If your Brother machine supports a wired network, you can use a network cable to connect to the wireless access point/router.
Page 250
Disable and Enable AirPrint Using Web Based Management (Web Browser) Confirm that your Brother machine is connected to the same network as your computer. 1. Start your web browser. 2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).
Home > Mobile/Web Connect > AirPrint > Print Using AirPrint Print Using AirPrint • Print from iPad, iPhone, or iPod Touch • Before Printing Using AirPrint (macOS) • Print Using AirPrint (macOS)
Page 252
Print from iPad, iPhone, or iPod Touch The procedure used to print may vary by application. Safari is used in the example below. 1. Make sure your Brother machine is turned on. 2. Use Safari to open the page that you want to print.
Page 253
> Before Printing Using AirPrint (macOS) Before Printing Using AirPrint (macOS) Before printing using macOS, add your Brother machine to the printer list on your Macintosh computer. 1. Select System Preferences from the Apple Menu. 2. Click Print & Scan or Printers & Scanners.
Page 254
2. On your Macintosh computer, use Safari to open the page that you want to print. 3. Click the File menu, and then select Print. 4. Make sure your Brother machine is selected. If a different machine (or no printer) is selected, click the Printer pop-up menu, and then select your Brother machine.
Mobile printing for Windows is a function to print wirelessly from your Windows mobile device. You can connect to the same network that your Brother machine is connected to and print without installing the printer ® driver on the device. Many Windows apps support this function.
™ 1. Android 4.4 or later ® 2. Wi-Fi Connection 3. Your Brother machine ® ™ ™ You must download the Mopria Print Service from the Google Play Store and install it on your Android device. Before using this service, you must turn it on.
Download and install Brother iPrint&Scan from the Google Play Store app. • For Apple Devices Brother iPrint&Scan allows you to use features of your Brother machine directly from your Apple device. Download and install Brother iPrint&Scan from the App Store. ® •...
You must download and install Brother iPrint&Scan on your Android device to use this feature. For more information, see the Mobile Print/Scan Guide for Brother iPrint&Scan. Go to your model's Manuals page on the Brother Solutions Center at support.brother.com. Related Information •...
3. No password is required by default. Type a password if you have set one, and then click 4. Click the Administrator tab. 5. Click the External Card Reader menu, and then enter the necessary information. 6. Click Submit. 7. Restart your Brother machine to activate the configuration. Related Information • Near-Field Communication (NFC)
Home > Troubleshooting Troubleshooting Use this section to resolve typical problems you may encounter when using your Brother machine. You can correct most problems yourself. IMPORTANT For technical help, you must call the country where you bought the machine. Calls must be made from within that country.
NFC feature, touch your device to the NFC symbol on your Brother machine to access the Brother Solutions Center and browse the latest FAQs from your device. (Your mobile telephone provider's message and data rates may apply.) ™...
Page 262
Error Message Cause Action Cover is Open The front cover is not completely Open and then firmly close the front cover of closed. the machine. Cover is Open The fuser cover is not completely Close the fuser cover located inside the back closed.
Page 263
• If the problem continues, contact Brother Customer Service. Contact Brother Customer Service at: 1-877-BROTHER (1-877-276-8437) (in USA) www.brother.ca/support (in Canada) or to locate a Brother Authorized Service Center, visit: www.brother-usa.com/service...
Page 264
Perform the color registration using the control panel. • Install a new belt unit. • If the problem continues, contact Brother Customer Service or your local Brother dealer. Replace Belt It is time to replace the belt unit. Replace the belt unit with a new one.
Page 265
LCD, and place it back in the drum unit. Install the drum unit in the machine again. If the problem continues, contact Brother Customer Service or your local Brother dealer. Condensation Condensation may have formed Leave the machine turned on. Wait for 30...
Page 266
Error Message Cause Action Cover is Open The front cover is not completely Open and then firmly close the front cover of closed. the machine. Cover is Open The fuser cover is not completely Close the fuser cover located inside the back closed.
Page 267
Error Message Cause Action No Paper The machine is out of paper, or • Refill paper in the paper tray. Make sure paper is not loaded correctly in the the paper guides are set to the correct size. paper tray. •...
Page 268
If the problem continues, contact Brother Customer Service. Contact Brother Customer Service at: 1-877-BROTHER (1-877-276-8437) (in USA) www.brother.ca/support (in Canada) or to locate a Brother Authorized Service Center, visit: www.brother-usa.com/service Registration Registration failed. • Press and hold down to turn off the machine.
Page 269
Error Message Cause Action Size Mismatch The paper in the tray is not the Load the correct size of paper in the tray correct size. indicated on the LCD and set the size of paper for the tray. Press Retry. Supplies The belt unit is near the end of its Order a new belt unit before the LCD displays...
Your Brother machine displays an error message if an error occurs. The most common error messages are shown in the table. You can correct most errors yourself. If, after reading this table, you still need help, the Brother Solutions Center offers the latest troubleshooting tips.
Page 271
Error Messages Cause Action Server Error 01 The machine's authentication Apply for Brother Web Connect information (needed to access the access again to receive a new Authentication failed. Do service) has expired or is invalid. temporary ID, and then use the new the following: 1.
Home > Troubleshooting > Paper Jams Paper Jams Always remove the remaining paper from the paper tray and straighten the stack when you are adding new paper. This helps prevent multiple sheets of paper from feeding through the machine at one time and prevents paper jams.
Home > Troubleshooting > Paper Jams > Paper is Jammed in the MP tray Paper is Jammed in the MP tray If the machine's control panel or the Status Monitor indicates that there is a jam in the machine's MP tray, follow these steps: 1.
Home > Troubleshooting > Paper Jams > Paper is Jammed in the Paper Tray Paper is Jammed in the Paper Tray If the machine's control panel or the Status Monitor indicates that there is a jam in the paper tray, follow these steps: 1.
Home > Troubleshooting > Paper Jams > Paper is Jammed in the Back of the Machine Paper is Jammed in the Back of the Machine If the machine's control panel or the Status Monitor indicates that there is a jam in the back (Rear) of the machine, follow these steps: 1.
Page 277
5. Close the fuser cover. If you print on envelopes, pull down the gray envelope levers to the envelope position again before closing the back cover. 6. Close the back cover until it locks in the closed position. Related Information •...
Home > Troubleshooting > Paper Jams > Paper is Jammed Inside the Machine Paper is Jammed Inside the Machine If the machine's control panel or the Status Monitor indicates that there is a jam inside the machine, follow these steps: 1.
Page 279
IMPORTANT To avoid print quality problems, DO NOT touch the shaded parts shown in the illustrations. 5. Make sure the green lock lever (1) is in the release position, as shown in the illustration. 6. Gently slide the drum unit into the machine until it stops at the green lock lever. 7.
Page 280
8. Using the green handle, push the drum unit back into the machine until it locks in place. 9. Close the machine's front cover. Related Information • Paper Jams...
Home > Troubleshooting > Paper Jams > Paper is Jammed underneath the Paper Tray Paper is Jammed underneath the Paper Tray If the machine's control panel or the Status Monitor indicates that there is a jam in the paper tray, follow these steps: 1.
Page 282
6. Use both hands to gently pull the jammed paper out of the back of the machine. 7. Close the back cover until it locks in the closed position. 8. Put the paper tray firmly back in the machine. Related Information •...
• Windows 7 and Windows Server 2008 R2 Click (Start) >Devices and Printers. Right-click Brother XXX-XXXX and click See what's printing. Click Printer in the menu bar. Make sure Use Printer Offline is not selected. ® • Windows Server 2008 Click (Start) >Control Panel >...
Page 284
Check the settings in your application to make sure they are set up to work with your machine. Confirm that the Brother printer driver is selected in your application's Print window. The machine prints the first couple of pages correctly, Check the settings in your application to make sure they then some pages have missing text.
Page 285
• Clean the Paper Pick-up Rollers • Load and Print Using the Multi‑purpose Tray (MP Tray)
Home > Troubleshooting > Improve the Print Quality Improve the Print Quality If you have a print quality problem, print a test page first. If the printout looks good, the problem is probably not the machine. Check the interface cable connections and try printing a different document. If the printout or test page printed from the machine has a quality problem, check the examples of poor print quality and follow the recommendations in the table.
Page 287
• Replace the toner cartridge that matches the color of the streak or band. To identify the color of the toner cartridge, visit the Brother Solutions Center at support.brother.com view the FAQs & Troubleshooting page for your Brother model. See Related Information:Replace the Toner Cartridge.
Page 288
• Identify the color causing the problem and install a new toner cartridge. To identify the color of the toner cartridge, visit the Brother Solutions Center at support.brother.com see the FAQs & Troubleshooting page. See Related Information:Replace the Toner Cartridge.
Page 289
Identify the color causing the problem and put in a new toner cartridge. To identify the color of the toner cartridge, visit the Brother Solutions Center at support.brother.com see the FAQs & Troubleshooting page. Uneven color density across the page See Related Information:Replace the Toner Cartridge.
Page 290
Examples of poor print quality Recommendation Toner smears easily Media Type to a thick setting. If you are printing an envelope, choose Env. Thick in the media type setting. • Choose Reduce Paper Curl mode in the printer driver. If the problem is not solved, choose Plain Paper in the media type setting.
Page 291
• Reduce Toner Consumption • Replace the Drum Unit • Clean the Drum Unit • Replace the Belt Unit...
Error Messages • ® Use the Network Connection Repair Tool (Windows • Where Can I Find My Brother Machine's Network Settings? • I Cannot Complete the Wireless Network Setup Configuration • My Brother Machine Cannot Print over the Network •...
Home > Troubleshooting > Network Problems > Error Messages Error Messages Your Brother machine will display an error message if an error occurs. The most common error messages are shown in the table. HL-L8260CDW Error Messages Cause Action A device is...
Page 294
Move the mobile device closer to your Brother mobile device cannot machine. communicate during the Wi-Fi • Move your Brother machine and the mobile device to Direct network configuration. an obstruction-free area. • If you are using the PIN Method of WPS, make sure you have entered the correct PIN.
Page 295
Directory server. • Make sure the machine is connected to the network. Wrong Date&Time, The Brother machine does not • Make sure the settings to access the SNTP time server contact your obtain the time from the SNTP are configured correctly in Web Based Management.
> Use the Network Connection Repair Tool (Windows ® Use the Network Connection Repair Tool (Windows Use the Network Connection Repair Tool to fix the Brother machine's network settings. It will assign the correct IP address and Subnet Mask. ®...
Home > Troubleshooting > Network Problems > Where Can I Find My Brother Machine's Network Settings? Where Can I Find My Brother Machine's Network Settings? • Print the Network Configuration Report • Change Machine Settings from Your Computer...
Wi-Fi Direct), try the one-push configuration using WPS (recommended) and set the Brother machine as a G/O. Your Brother machine is Move your Brother machine within about 3.3 feet (1 meter) of the Wi-Fi Direct placed too far from your mobile device when you configure the Wi-Fi Direct network settings.
Page 299
Cause Action Interface Direct configuration, do the • If you are using your Brother machine as a client, confirm how following: many devices are allowed in the current Wi-Fi Direct network, and then check how many devices are connected. ®...
Print the WLAN Report to check the error code on the printed report. Wireless not connected to the wireless network. If you have checked and tried all of the above, but your Brother machine still cannot print, uninstall the printer driver and reinstall it. Related Information •...
Page 301
• Print the WLAN Report • Wireless LAN Report Error Codes ® • Use the Network Connection Repair Tool (Windows • I Want to Check that My Network Devices are Working Correctly...
Network Status or Wireless Link Status is Link OK. Configuration Report. Check that you can Ping the Brother machine from your computer using the IP address or Wired/Wireless "ping" the Brother ® the node name in the Windows...
Troubleshooting > Google Cloud Print Problems Google Cloud Print Problems Difficulty Suggestions My Brother machine is not displayed in the printer list. Make sure your machine is turned on. ™ Confirm that Google Cloud Print is enabled. Confirm that your machine is registered with Google ™...
> AirPrint Problems AirPrint Problems Difficulty Suggestions My Brother machine is not displayed in the printer list. Make sure your Brother machine is turned on. Confirm the network settings. See Related Information. Move the mobile device closer to the wireless access point/router, or to your Brother machine.
EPS data that includes binary. You can print the EPS data at the machine through a network. For help installing the BR-Script3 printer driver through the network, go to the Brother Solutions Center at support.brother.com. The Brother software cannot be installed.
Page 306
Difficulties Suggestions If you are using a firewall function of anti-spyware or antivirus security software, temporarily disable it and then install the Brother software. ® For Windows Server 2012: Hardware and Sound Related Information • Troubleshooting...
Home > Troubleshooting > Check the Machine Information Check the Machine Information Follow these instructions to check your Brother machine's serial number and firmware version. >> HL-L8260CDW >> HL-L8360CDW/HL-L8360CDWT HL-L8260CDW 1. Press a or b to select the [Machine Info.] option, and then press OK.
Use the Machine Reset function to reset the machine's settings to the factory settings. The network settings and the security settings will not be reset by the Machine Reset function. >> HL-L8260CDW >> HL-L8360CDW/HL-L8360CDWT HL-L8260CDW 1. Press a or b to select the following: a.
• Unplug all the interface cables before you perform a Network Reset. >> HL-L8260CDW >> HL-L8360CDW/HL-L8360CDWT HL-L8260CDW 1. Press a or b to select the following: a. Select [Initial Setup]. Press OK. b. Select [Reset]. Press OK.
Use the Factory Reset function to restore all settings back to the factory settings. Unplug all the interface cables before you perform a Factory Reset. >> HL-L8260CDW >> HL-L8360CDW/HL-L8360CDWT HL-L8260CDW 1. Press a or b to select the following: a. Select [Initial Setup]. Press OK.
Home > Routine Maintenance Routine Maintenance • Replace Supplies • Clean the Machine • Calibrate Color Output • Correct Color Print Alignment (Color Registration) • Check the Remaining Part Life • Pack and Ship Your Brother Machine • Replace Periodic Maintenance Parts...
Brother collection program. If you choose not to return your used supply, discard the used supply according to local regulations, keeping it separate from domestic waste. If you have questions, contact your local waste disposal office.
Page 314
Belt unit Waste toner box Related Information • Routine Maintenance • Replace the Toner Cartridge • Replace the Drum Unit • Replace the Belt Unit • Replace the Waste Toner Box • Reset the Drum Counter • Reset the Belt Unit Counter •...
Home > Routine Maintenance > Replace Supplies > Replace the Toner Cartridge Replace the Toner Cartridge Before starting the replacement procedure, see Related Information: Replace Supplies. 1. Make sure the machine is turned on. 2. Press the front cover release button and pull open the front cover. 3.
Page 316
6. Unpack the new toner cartridge. 7. Remove the protective cover. 8. Insert the toner cartridge into the drum unit and gently pull it toward you until you hear it lock into place. Make sure that you match the toner cartridge color to the same color label on the drum unit. Repeat this for all toner cartridges.
Page 317
If a toner cartridge is left unpacked for a long time, the toner life will be shortened. • Brother strongly recommends you DO NOT refill the toner cartridge provided with your machine. We also strongly recommend you continue to use only Genuine Brother Brand replacement toner cartridges.
Home > Routine Maintenance > Replace Supplies > Replace the Drum Unit Replace the Drum Unit Before starting the replacement procedure, see Related Information: Replace Supplies. 1. Make sure the machine is turned on. 2. Press the front cover release button and pull open the front cover. 3.
Page 319
7. Hold the handle of the toner cartridge and gently push it away from you to unlock it. Pull it up and out of the drum unit. Repeat this for all toner cartridges. 8. Reinsert the toner cartridge into the new drum unit and gently pull it toward you until you hear it lock into place.
Page 320
Drum wear and tear occurs due to use and rotation of the drum and interaction with paper, toner and other materials in the paper path. In designing this product, Brother decided to use the number of rotations of the drum as a reasonable determinant of the drum life. When a drum reaches the factory- established rotation limit corresponding to the rated page yield, the product’s LCD will advise you to...
Page 321
The machine should be used only in a clean, dust-free environment with adequate ventilation. Printing with a non-Brother drum unit may reduce not only the print quality but also the quality and life of the machine itself. Warranty coverage does not apply to problems caused by the use of a non-Brother drum unit.
Home > Routine Maintenance > Replace Supplies > Replace the Belt Unit Replace the Belt Unit Before starting the replacement procedure, see Related Information: Replace Supplies. 1. Make sure the machine is turned on. 2. Press the front cover release button and pull open the front cover. 3.
Page 323
6. Unpack the new belt unit and install the new belt unit in the machine. Make sure the belt unit is level and fits firmly into place. NOTE To avoid print quality problems, DO NOT touch the shaded parts shown in the illustrations. 7.
Page 324
9. Turn the green lock lever clockwise to the lock position. 10. Using the green handle, push the drum unit back into the machine until it locks in place. 11. Close the machine's front cover. After installing the new belt unit, you must reset the counter. See Related Information: Reset the Belt Unit Counter.
Home > Routine Maintenance > Replace Supplies > Replace the Waste Toner Box Replace the Waste Toner Box Before starting the replacement procedure, see Related Information: Replace Supplies. 1. Make sure the machine is turned on. 2. Press the front cover release button and pull open the front cover. 3.
Page 326
NOTE To avoid print quality problems, DO NOT touch the shaded parts shown in the illustrations. 6. Remove the two pieces of orange packing material and discard them. This step is only necessary when you are replacing the waste toner box for the first time, and is not required for the replacement waste toner box.
Page 327
9. Slide the belt unit back into the machine. Make sure the belt unit is level and fits firmly into place. NOTE To avoid print quality problems, DO NOT touch the shaded parts shown in the illustrations. 10. Make sure the green lock lever (1) is in the release position, as shown in the illustration. 11.
Page 328
12. Turn the green lock lever clockwise to the lock position. 13. Using the green handle, push the drum unit back into the machine until it locks in place. 14. Close the machine's front cover. Related Information • Replace Supplies...
IMPORTANT DO NOT reset the drum counter unless you are replacing the drum unit. >> HL-L8260CDW >> HL-L8360CDW/HL-L8360CDWT HL-L8260CDW 1. Make sure the machine is turned on. 2. Press a or b to select the following: a. Select [Machine Info.]. Press OK.
Reset the Belt Unit Counter When you replace a belt unit with a new one, you must reset the belt unit counter. >> HL-L8260CDW >> HL-L8360CDW/HL-L8360CDWT HL-L8260CDW 1. Make sure the machine is turned on. 2. Press a or b to select the following: a.
Home > Routine Maintenance > Clean the Machine Clean the Machine Clean the outside and inside of the machine regularly with a dry, lint-free cloth. When you replace the toner cartridge or the drum unit, make sure you clean the inside of the machine. If printed pages are stained with toner, clean the inside of the machine with a dry, lint-free cloth.
Page 332
Waste toner box Related Information • Routine Maintenance • Clean the Laser Scanner Windows • Clean the Touchscreen LCD • Clean the Corona Wires • Clean the Drum Unit • Clean the Paper Pick-up Rollers...
Home > Routine Maintenance > Clean the Machine > Clean the Laser Scanner Windows Clean the Laser Scanner Windows 1. Press and hold to turn off the machine. 2. Press the front cover release button and pull open the front cover. 3.
Page 334
6. Make sure the green lock lever (1) is in the release position, as shown in the illustration. 7. Gently slide the drum unit into the machine until it stops at the green lock lever. 8. Turn the green lock lever clockwise to the lock position. 9.
Page 335
11. Press to turn on the machine. Related Information • Clean the Machine...
Routine Maintenance > Clean the Machine > Clean the Touchscreen LCD Clean the Touchscreen LCD Related Models: HL-L8360CDW/HL-L8360CDWT IMPORTANT DO NOT use any type of liquid cleaners (including ethanol). 1. Press and hold to turn off the machine. 2. Clean the Touchscreen with a dry, soft lint-free cloth.
Home > Routine Maintenance > Clean the Machine > Clean the Corona Wires Clean the Corona Wires 1. Press the front cover release button and pull open the front cover. 2. Hold the drum unit's green handle. Pull the drum unit out of the machine until it stops. 3.
Page 338
• BK: Black • C: Cyan • M: Magenta • Y: Yellow Make sure you put the toner cartridge in correctly or it may separate from the drum unit. 6. Using the green handle, push the drum unit back into the machine until it locks in place. 7.
If your printout has black or white dots or other repeating marks at 3.7 in. (94 mm) intervals, the drum may have foreign material, such as glue from a label, stuck on the drum surface. >> HL-L8260CDW >> HL-L8360CDW/HL-L8360CDWT HL-L8260CDW 1. Make sure the machine is in Ready Mode.
Page 340
7. Hold the handle of the toner cartridge and gently push it away from you to unlock it. Pull it up and out of the drum unit. Repeat this for all toner cartridges. 8. Turn the drum unit over by holding the green handles. Make sure that the drum unit gears (1) are on the left side.
Page 341
• BK: Black • C: Cyan • M: Magenta • Y: Yellow 10. Hold the drum unit frame with both hands, place your left thumb on the drum unit gear, and roll the drum toward you by hand while looking at the surface of the suspected area. To avoid print quality problems, DO NOT touch the surface of the drum unit except the edge.
Page 342
17. Using the green handle, push the drum unit back into the machine until it locks in place. 18. Close the machine's front cover. 19. Press to turn on the machine. HL-L8360CDW/HL-L8360CDWT 1. Make sure the machine is in Ready Mode.
Page 343
2. Press [Settings] > [All Settings] > [Print Reports] > [Drum Dot Print]. 3. Press [Yes]. The machine prints the Drum Dot Check Sheet. 4. Press and hold to turn off the machine. 5. Press the front cover release button and pull open the front cover. 6.
Page 344
9. Turn the drum unit over by holding the green handles. Make sure that the drum unit gears (1) are on the left side. 10. Use the numbered markers next to the drum roller to find the mark. For example, a cyan dot in column 2 on the check sheet would mean that there is a mark in the “2”...
Page 345
To avoid print quality problems, DO NOT touch the surface of the drum unit except the edge. 12. Wipe the surface of the drum gently with a dry cotton swab until the mark on the surface comes off. NOTE DO NOT clean the surface of the photosensitive drum with a sharp object or any liquids. 13.
Page 346
16. Gently slide the drum unit into the machine until it stops at the green lock lever. 17. Turn the green lock lever clockwise to the lock position. 18. Using the green handle, push the drum unit back into the machine until it locks in place. 19.
Home > Routine Maintenance > Clean the Machine > Clean the Paper Pick-up Rollers Clean the Paper Pick-up Rollers Cleaning the paper pick-up rollers periodically may prevent paper jams by ensuring that paper feeds properly. If you have paper feed problems, clean the pick-up rollers as follows: 1.
Calibrating your machine helps improve the output color density. If you are using the Macintosh printer driver, the printer driver automatically retrieves the calibration data. To retrieve the data manually, you must perform the calibration using Brother's Status Monitor. >> HL-L8260CDW >>...
Reset the Machine's Calibration Settings If the output color differs from what you see on your monitor, try resetting your machine's calibration parameters. >> HL-L8260CDW >> HL-L8360CDW/HL-L8360CDWT HL-L8260CDW 1. Press a or b to select the following: a. Select [Printer]. Press OK.
Correct Color Print Alignment (Color Registration) If solid areas of color or images have cyan, magenta or yellow fringes, use the Color Registration function. >> HL-L8260CDW >> HL-L8360CDW/HL-L8360CDWT HL-L8260CDW 1. Press a or b to select the following: a. Select [Printer]. Press OK.
Home > Routine Maintenance > Check the Remaining Part Life Check the Remaining Part Life >> HL-L8260CDW >> HL-L8360CDW/HL-L8360CDWT HL-L8260CDW 1. Press a or b to select the following: a. Select [Machine Info.]. Press OK. b. Select [Parts Life]. Press OK.
4. Pack the machine, the printed materials, and the AC power cord (if applicable) in the original carton with the original packing material as shown. If you are returning your machine to Brother as part of the Exchange Service, pack only the machine. Keep all separate parts and printed materials to use with your "Exchange"...
Page 353
5. Close the carton and tape it shut. 6. If you have a Lower Tray, repack it as shown. Related Information • Routine Maintenance...
Replace the following parts regularly to maintain print quality. The parts listed below must be replaced after printing approximately 50,000 pages for the PF Kit MP and 100,000 pages for the other parts. Contact Brother Customer Service or a Brother Authorized Service Center when the following message appears on the LCD: LCD Message Description Replace the Fuser Unit.
Home > Machine Settings Machine Settings Customize settings and features, create shortcuts, and work with options displayed on the machine's LCD to make your Brother machine a more efficient work tool. • Change Machine Settings from the Control Panel •...
Home > Machine Settings > Change Machine Settings from the Control Panel Change Machine Settings from the Control Panel • General Settings • Settings and Features Tables...
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings General Settings • Set Sleep Mode Countdown • About Deep Sleep Mode • Set Auto Power Off Mode • Adjust the LCD Backlight Brightness • Change How Long the LCD Backlight Stays On •...
Page 358
Use these instructions to set a time delay (countdown) before the machine enters Sleep Mode. >> HL-L8260CDW >> HL-L8360CDW/HL-L8360CDWT HL-L8260CDW 1. Press a or b to select the following: a. Select [General Setup]. Press OK.
Page 359
The LCD displays Deep Sleep. • The machine receives a job. • Someone presses a button on the control panel. HL-L8360CDW/ The LCD backlight turns off and the • The machine receives a job. HL-L8360CDWT Power LED brightens and dims.
Page 360
• To start printing, press on the control panel and then send a print job. >> HL-L8260CDW >> HL-L8360CDW/HL-L8360CDWT HL-L8260CDW 1. Press a or b to select the following: a. Select [General Setup]. Press OK. b. Select [Ecology]. Press OK.
Page 361
> Adjust the LCD Backlight Brightness Adjust the LCD Backlight Brightness Related Models: HL-L8360CDW/HL-L8360CDWT If you are having difficulty reading the LCD, changing the brightness setting may help. 1. Press [Settings] > [All Settings] > [General Setup] > [LCD Settings] > [Backlight].
Page 362
> Change How Long the LCD Backlight Stays On Change How Long the LCD Backlight Stays On Related Models: HL-L8360CDW/HL-L8360CDWT Set how long the LCD backlight stays on. 1. Press [Settings] > [All Settings] > [General Setup] > [LCD Settings] > [Dim Timer].
Page 363
Using the Toner Save feature may reduce toner consumption. When Toner Save is set to on, the print on your documents appears lighter. We DO NOT recommend using the Toner Save feature for printing photo or grayscale images. >> HL-L8260CDW >> HL-L8360CDW/HL-L8360CDWT HL-L8260CDW 1. Press a or b to select the following: a. Select [General Setup]. Press OK.
Page 364
The Quiet Mode setting can reduce printing noise. When Quiet Mode is turned on, the print speed becomes slower. The factory setting is off. >> HL-L8260CDW >> HL-L8360CDW/HL-L8360CDWT HL-L8260CDW 1. Press a or b to select the following: a. Select [General Setup]. Press OK.
Page 365
Change the Language on the LCD Change the LCD language if needed. This feature is not available in some countries. >> HL-L8260CDW >> HL-L8360CDW/HL-L8360CDWT HL-L8260CDW 1. Press a or b to select the following: a. Select [Initial Setup]. Press OK.
Settings and Features Tables The Settings tables will help you understand the menu selections and options that are found in the machine’s programs. • Access Menus and Change Your Machine's Settings • Settings Tables (HL-L8260CDW) • Settings Tables (HL-L8360CDW/HL-L8360CDWT) • Feature Tables (HL-L8360CDW/HL-L8360CDWT)
Page 367
Home > Machine Settings > Change Machine Settings from the Control Panel > Settings and Features Tables > Access Menus and Change Your Machine's Settings Access Menus and Change Your Machine's Settings Related Models: HL-L8260CDW Use the control panel to access the machine's menus and change various settings. 1.
Page 368
Home > Machine Settings > Change Machine Settings from the Control Panel > Settings and Features Tables > Settings Tables (HL-L8260CDW) Settings Tables (HL-L8260CDW) Related Models: HL-L8260CDW Use these tables to understand the various menus and options that you will use to set your preferences on the machine.
Page 369
Level 2 Level 3 Level 4 Description Setting Lock Set Password Restrict unauthorized users from changing the machine’s settings. New Passwd:XXXX (Available only when you enter the password for the first time.) Interface Select Select the interface to use. If you select the Auto option, the machine changes the interface to USB or Network depending on which interface is receiving data.
Page 370
CAPT Use CAPT (Color Advanced Printing Technology) for optimal print quality when printing a PS file created by a non-Brother PS driver. Colors and photos appear clearer and more accurate. Print speed will be slower. Color...
Page 371
Level 2 Level 3 Level 4 Description Color Color Settings Blue Adjust the blue color. Correction [Network] (HL-L8260CDW) Level 2 Level 3 Level 4 Level 5 Description Wired LAN TCP/IP Boot Method - Choose the IP method that best suits your needs.
Page 372
Configure the wireless network settings using the setup wizard. WLAN Assistant - Configure your wireless network settings using the Brother installation disc. Configure your wireless network settings using the one-button push method. WPS w/ PIN Configure the wireless network settings using Code WPS with a PIN code.
Page 373
Level 2 Level 3 Level 4 Level 5 Description IPsec IPsec is an optional security feature of the IP protocol that provides authentication and encryption services. We recommend contacting your network administrator before changing this setting. Network Restore all network settings of your machine to Reset the factory settings.
Page 374
[Initial Setup] Level 2 Level 3 Description Reset Machine Reset Restore all the machine's settings that you have changed, such as Paper Type. Network Reset Restore all network settings of your machine to the factory settings. Factory Reset Reset the machine and restore the printer settings (including command settings) to the factory settings.
Page 375
Level 1 Level 2 Level 3 Description Direct Default Settings Index Print Set the default index print option to simple format or Print details. Related Information • Settings and Features Tables...
Page 376
Home > Machine Settings > Change Machine Settings from the Control Panel > Settings and Features Tables > Settings Tables (HL-L8360CDW/HL-L8360CDWT) Settings Tables (HL-L8360CDW/HL-L8360CDWT) Related Models: HL-L8360CDW/HL-L8360CDWT [Settings] Level 2 Level 3 Level 4 Descriptions Toner Toner Life View the approximate remaining toner life.
Page 377
Auto IF Time Set the time-out period for the auto interface selection. Input Buffer Increase or decrease the input buffer capacity. (HL-L8360CDW) Available if the Optional Tray(s) is installed. Available if the Optional Tray(s) is installed. [All Settings] > [Printer] Level 3...
Page 378
CAPT Use CAPT (Color Advanced Printing Technology) for optimal print quality when printing a PS file created by a non-Brother PS driver. Colors and photos appear clearer and more accurate. Print speed will be slower. Color...
Page 379
Level 3 Level 4 Level 5 Descriptions Color Calibration Reset Reset the calibration parameters to the default Correction settings. Registration Align the print position of each color. Auto Correction - Set the machine to perform Color Calibration and Registration automatically. Color Settings Setting Mode Select whether to apply the color print settings of the...
Page 380
Enable or disable the IPv6 protocol. Setup Wizard Configure the wireless network settings using the setup wizard. WLAN Assistant Configure your wireless network settings using the Brother installation disc. Configure your wireless network settings using the one-button push method. WPS w/ PIN Code - Configure the wireless network settings using WPS with a PIN code.
Page 381
Level 3 Level 4 Level 5 Level 6 Descriptions Wi-Fi Direct Push Button Configure your Wi-Fi Direct network settings using the one-button push method quickly. PIN Code Configure your Wi-Fi Direct network settings using WPS with a PIN code quickly. Manual Configure your Wi-Fi Direct network settings manually.
Page 382
Display the remaining life of the PF Kit 4. PF Kit 4 Life is approximate and may vary by type of use. (HL-L8360CDW) Available if the Optional Tray(s) is installed. Available if the Optional Tray(s) is installed. [All Settings] > [Initial Setup]...
Page 383
Change the TCP/IP settings. Setup Wizard Configure the wireless network settings using the setup wizard. WLAN Assistant Configure your wireless network settings using the Brother installation disc. Configure your wireless network settings using the one-button push method. WPS w/ PIN Code Configure the wireless network settings using WPS with a PIN code.
Page 384
[Direct Print] Level 3 Level 4 Level 5 Level 6 Descriptions Direct (Select the file you want to Print Paper Type Set the print media type when Print print out.) Settings printing directly from a USB flash drive. Paper Size Set the paper size when printing directly from a USB flash drive.
Page 385
Level 3 Level 4 Level 5 Level 6 Descriptions Direct DefaultSettings stamps in the PDF file, along with Print the text. Index Print Set the default index print option to simple format or details. Related Information • Settings and Features Tables...
Home > Machine Settings > Change Machine Settings from Your Computer Change Machine Settings from Your Computer • Change Machine Settings Using Web Based Management • Where Can I Find My Brother Machine's Network Settings? • Network Management Software and Utilities...
Home > Machine Settings > Change Machine Settings from Your Computer > Change Machine Settings Using Web Based Management Change Machine Settings Using Web Based Management Web Based Management is a utility that uses a standard web browser to manage your machine using the Hyper Text Transfer Protocol (HTTP) or Hyper Text Transfer Protocol over Secure Socket Layer (HTTPS).
Page 388
Home > Machine Settings > Change Machine Settings from Your Computer > Change Machine Settings Using Web Based Management > What is Web Based Management? What is Web Based Management? Web Based Management is a utility that uses a standard web browser to manage your machine using the Hyper Text Transfer Protocol (HTTP) or Hyper Text Transfer Protocol over Secure Socket Layer (HTTPS).
Page 389
Home > Machine Settings > Change Machine Settings from Your Computer > Change Machine Settings Using Web Based Management > Access Web Based Management Access Web Based Management • We recommend using the HTTPS security protocol when configuring settings using Web Based Management.
Page 390
Home > Machine Settings > Change Machine Settings from Your Computer > Change Machine Settings Using Web Based Management > Set a Login Password for Web Based Management Set a Login Password for Web Based Management We recommend setting a login password to prevent unauthorized access to Web Based Management. 1.
Home > Appendix Appendix • Specifications • How to Enter Text on Your Brother Machine • Supplies • Important Information About Toner Cartridge Life • Accessories • Brother Numbers...
Print Method • Electrophotographic Laser Printer Memory Capacity Standard • (HL-L8260CDW) 256 MB • (HL-L8360CDW/HL-L8360CDWT) 512 MB LCD (Liquid Crystal Display) • (HL-L8260CDW) 16 characters x 2 lines • (HL-L8360CDW/HL-L8360CDWT) 2.7 in. (67.5 mm) TFT Color Touchscreen LCD Power Source •...
Page 393
47.9 lb (21.7 kg) • (HL-L8360CDW) 48.1 lb (21.8 kg) • (HL-L8360CDWT) 62.7 lb (28.4 kg) Noise Level Sound Pressure Printing • LpAm = 49 dB (A) Printing • LpAm = 44 dB (A) (Quiet Mode) Ready • LpAm = Inaudible...
Page 394
16 to 28 lb (60 to 105 g/m (HL-L8260CDW) Maximum number of Lower Trays: Up to three LT-330CL Lower Trays (HL-L8360CDW) Maximum number of Lower Trays: Up to three LT-330CL Lower Trays or up to two Lower Trays in any other combinations...
Page 395
When you connect an external IC card reader, use a HID class driver supported device. Direct Print Feature Specifications Compatibility • PDF version1.7, JPEG, Exif+JPEG, PRN (created by own printer driver), TIFF (scanned by Brother models), XPS version 1.0 Interface • USB direct interface : Front x 1...
Page 396
Third party USB ports are not supported. For the latest driver updates, go to your model's Downloads page on the Brother Solutions Center at support.brother.com. All trademarks, brand and product names are the property of their respective companies.
• Press Back to delete characters entered incorrectly. HL-L8360CDW/HL-L8360CDWT • When you must enter text on your Brother machine, a keyboard appears on the LCD. • The characters that are available may differ depending on your country. • The keyboard layout may differ depending on the operation you perform.
Page 398
• Configure Your Machine for a Wireless Network Using the Machine's Control Panel Setup Wizard • Configure Your Machine for a Wireless Network When the SSID Is Not Broadcast...
When the time comes to replace supplies, such as the toner or drum, an error message will appear on your machine's control panel or in the Status Monitor. For more information about the supplies for your machine, visit www.brother.com/original/index.html or contact your local Brother dealer. The supply order number will vary depending on your country and region. Supply Items Supply order No.
Page 400
Supply Items Supply order No. Approximate Life Applicable Models (Page Yield) Belt Unit • BU-330CL • Approximately 50,000 HL-L8260CDW/HL-L8360CDW/ HL-L8360CDWT pages Waste Toner • WT-320CL • Approximately 50,000 HL-L8260CDW/HL-L8360CDW/ HL-L8360CDWT pages Approximate cartridge yield is declared in accordance with ISO/IEC 19798.
Home > Appendix > Important Information About Toner Cartridge Life Important Information About Toner Cartridge Life Toner Cartridge Life This product detects the life of the toner cartridges using the following two methods: • Detection by counting the dots of each color that are necessary to create an image •...
HL-L8360CDW/HL-L8360CDWT (HL-L8260CDW) Maximum number of Lower Trays: Up to three LT-330CL Lower Trays (HL-L8360CDW) Maximum number of Lower Trays: Up to three LT-330CL Lower Trays or up to two Lower Trays in any other combinations (HL-L8360CDWT) Maximum number of additional Lower Trays: One LT-330CL Lower Tray or one LT-340CL Lower Tray Related Information •...
The Brother Solutions Center is our one-stop resource for all your Machine needs. Download the latest software and utilities and read FAQs and troubleshooting tips to learn how to get the most from your Brother product. Check here for Brother driver updates, too.
Page 404
NOTE In Canada, only Visa and MasterCard are accepted. In USA: 1-877-552-MALL (1-877-552-6255) 1-800-947-1445 (assistance via fax) www.brothermall.com In Canada: www.brother.ca Related Information • Appendix...
Page 405
Dollard-des-Ormeaux, QC, Canada H9B 3H6 Visit us on the World Wide Web www.brother.com These machines are approved for use in the country of purchase only. Local Brother companies or their dealers will support only machines purchased in their own countries. USA/CAN...
Need help?
Do you have a question about the HL-L8360CDW and is the answer not in the manual?
Questions and answers