Programming Process - Assign Codes To Buttons - Vision Techconnect Control Product Manual

PROGRAMMING PROCESS - Assign Codes to Buttons

Click the button you want to assign codes to:
The view will change to button view. To change view back select "Overview" (top left above).
Mode Explanation:
Simultaneous
All codes assigned to button are sent with one press. Individual codes can be delayed.
Sequential
Use for input toggle. Press once, the first code is sent, press again, the second code is sent etc.
Repeat:
Use for volume control. Hold down button to send code repeatedly.
Buzzer Duration:
To activate set the time or click on button.
12