Connecting A Digital Voice Recorder - Olympus DS-3000 Instructions Manual

Connecting a Digital Voice Recorder

Connecting a Digital Voice Recorder DS-2000/DS-3000
Notes
- Make sure DSS Player for Mac is installed (
the USB connection cable to a Digital Voice Recorder DS-2000/DS-3000.
- Make sure that the Digital Voice Recorder rear-panel POWER/LOCK switch is
set to ON, the Digital Voice Recorder is stopped, and the Hold switch is re-
leased before connecting the USB connection cable to the Digital Voice Re-
corder DS-2000/DS-3000.
1 1 1 1 1
Insert connector A of the accessory
USB connection cable into the
computer's USB port.
2 2 2 2 2
Insert connector B of the accessory
USB cable into the Digital Voice Recorder DS-2000/DS-3000.
Notes
- For information about the computer's USB port, refer to the user's guide sup-
plied with your computer.
- Do not pull out the USB connection cable while a communication session is in
progress, or you might corrupt data.
see P.8) before connecting
B
A
11