V1.0 Manufacturer's drawings Description Water supply Water drain Combined valve Rotary control with thermostat Electronic control unit Photovoltaic Boilers Model PVB-30 PVB-80 Volume Illustration 1 | 2 | 3 Dimensions [mm]...
V1.0 Specifications UNIT 30 LITRES 80 LITRES Photovoltaic boiler Product Model PVB-30 PVB-80 Volume Max. photovoltaic heating capacity Max. current consumed 15.5 15.5 230V heating power 1.500 1.500 Adjustable water temperature range for 230V reheating °C 0-75 0-75 function...
V1.0 System Modes Mode Illustration Description Energy source 1: PV The boiler is primarily powered by PV electricity. PV Modules mode If no solar energy is available, the 230V auxiliary heating + 230V can be switched on as an option.
Hot water device plugs for external power supply Power Cables* *not included in delivery Heating time of the water as a function of the PV heating power Achievement PVB-30 PVB-80 200 W 6 °C/h 2 °C/h 400 W 12 °C/h 4.5 °C/h...
Dear customers, thank you for the relevant local regulations. The protective devices choosing a device from fothermo provided or recommended by the manufacturer as System AG! well as all other assemblies must be installed...
V1.0 Specifications Assembly This hot water tank can provide hot water from the The hot water tank may only be installed in a room with fire protection room temperature general water supply network to several consumers at permanently above 0 °С. During normal operation of the same time.
V1.0 the devices are shown in Figs. 1, 2, 3, 7 and in the If other accessories that are not included in the scope tables. Group 150 vertical hot water tanks are of delivery have to be used in accordance with local...
V1.0 devices that ensure the safety of the hot water tank. It IMPORTANT! In Denmark, Sweden, Norway and is strictly FORBIDDEN to use the hot water tank with a Finland, the connection of the hot water tank to the...
To turn it on: design of the photovoltaic power depending on the Press and hold the - button for about three climatic conditions: seconds. Display: Climatic PVB-30 PVB-80 The current water temperature is shown on the conditions display. Sun-poor countries, •...
For connecting external energy sources such as a • Heat the water at regular intervalsto at battery. For this purpose, a fothermo battery cable is least 60 °C. required to be able to connect the battery to the MC4 •...
V1.0 should be done at least once every two years. In points out that the device must not be disposed of in regions with calcareous water more often. The normal household waste at the end of its service life.
Page 15
V1.0 equipment during the period of its repair and maintenance are not covered by the warranty of the device. COMPLIANCE WITH THE REQUIREMENTS SPECIFIEDIN THE MANUAL IS A PREREQUISITE FOR THE SAFE OPERATION OF THE PURCHASED PRODUCT AND IS WARRANTYCONDITIONS.
Need help?
Do you have a question about the PVB-30 and is the answer not in the manual?
Questions and answers