FTX Colt RTR Brushed 2.4GHz 4WD Mini Buggy Congratulations on your purchase of the FTX ‘Colt Buggy’. This 1/18th scale model has been factory assembled and all electrics installed and set up to make it the easiest possible introduction to the sport of driving RC cars.
CHARGING/INSTALLING THE BATTERY. Always store your model with the battery pack unplugged and removed. Always charge your battery away from the vehicle. The included 500mAh mains charger will take approx 2 hours to charge a fully discharged battery, but always remove it from the charger if it becomes warm to the touch. Always disconnect the charger from the mains supply and the battery pack when not in use.
KEY TO TRANSMITTER FEATURES TRANSMITTER FUNCTIONS • A – 2.4GHz Aerial The Steering Wheel (B) operates Channel 1 and when turned anti B – Steering Wheel clockwise the model should steer to the left and vice versa. If not, C – Throttle Trigger simply the flick the Steering Reverse Switch (H) to the “Rev”...
THROTTLE CONTROL When at the mid position the model should When pulled back to the handset the model When pushed away the model should brake (and remain stationary, if it creeps slightly adjust should move forwards, if not flick the then move in reverse if applicable) if not simply the throttle neutral dial accordingly.
Need help?
Do you have a question about the Colt and is the answer not in the manual?
Questions and answers