Outlaw Manual.qxp_Brushed Oulaw 23/09/2016 16:14 Page 2 FTX Outlaw 1/10th Scale RTR 4WD Brushed Electric Powered Off Road Trail Vehicle Congratulations on your purchase of the FTX Outlaw 4x4 Trail vehicle. This 1/10th scale model has been factory assembled and all electrics installed and set up to make it the easiest possible introduction to the sport of driving RC cars.
Page 4
Outlaw Manual.qxp_Brushed Oulaw 23/09/2016 16:14 Page 4 Aerial Assembly. Uncoil the aerial wire carefully so as not to kink or knot it in anyway, and first be sure to insert the wire up through the top chassis aerial mount hole from below.
Outlaw Manual.qxp_Brushed Oulaw 23/09/2016 16:14 Page 5 FTX6557W ESC Instructions Features Changing from Crawler mode to Normal mode 1. Turn on the ESC and wait for the neutral set “Do” “Re” “Me”, the LED will be This ESC is setup in a simple way for ease of operation. When switch on it, it SOLID automatically searches for the neutral point.
Page 6
Outlaw Manual.qxp_Brushed Oulaw 23/09/2016 16:14 Page 6 Etronix Pulse EX2 Sport 2.4GHZ RADIO SET-UP 2 Channel 2.4GHz Steer Wheel Transmitter 1) INTRODUCTION. 6) TRANSMITTER CHARGING. Thank you for choosing this Etronix Connect a dedicated transmitter charger to the power 2.4GHz radio system, it has been supply.
Page 7
Outlaw Manual.qxp_Brushed Oulaw 23/09/2016 16:14 Page 7 9) TRANSMITTER FUNCTIONS. A vertical aerial achieves maximum range, so the short 2.4GHz aerial (A) can be folded and rotated to achieve the most vertical position once you are holding the handset comfortably. Then it allows you to fold the aerial away for safe storage.
Page 8
Outlaw Manual.qxp_Brushed Oulaw 23/09/2016 16:14 Page 8 When at the mid position the model should When pulled back to the handset the model When pushed away the model should brake (and remain stationary, if it creeps slightly adjust should move forwards, if not flick the then move in reverse if applicable) if not simply the throttle neutral dial accordingly.
Page 9
Outlaw Manual.qxp_Brushed Oulaw 23/09/2016 16:14 Page 9 12) MATCHING THE RECEIVER TO throttle (channel 2) to a preset position so THE TRANSMITTER. (BINDING) long as power is still supplied to it. Set up the failsafe before first use, by To make sure only one transmitter can control the...
Warranty Due to the nature of this product and potential use FTX warrants it to be free of material and workmanship defects when new. FTX will at its sole discretion repair or replace defective components free of charge within 30 days from date of purchase. This warranty does not cover wear and tear, crash or impact damage, modifications, component water damage failure to perform maintenance or damage from improper use.
Need help?
Do you have a question about the OUTLAW and is the answer not in the manual?
Questions and answers