Subscribe to Our Youtube Channel
Related Manuals for knudsen 1612
Summary of Contents for knudsen 1612
- Page 1 SOUNDER 1612 QUICK START GUIDE D101-05760-Rev1.10 For use with Knudsen Sounder 1612 Part Number: D229-04396...
-
Page 2: Table Of Contents
CABLE CONNECTIONS ..........................10 The information contained in this documents is proprietary of Knudsen Engineering Limited. Any disclosure, use, or reproduction of this information for other than the specific purpose intended is expressly prohibited unless agreed to in writing by Knudsen. -
Page 3: Amendment History
Updated Text Darren Gibson The information contained in this documents is proprietary of Knudsen Engineering Limited. Any disclosure, use, or reproduction of this information for other than the specific purpose intended is expressly prohibited unless agreed to in writing by Knudsen. -
Page 4: Introduction
WebSite: http://knudseneng.com/ Unpacking the Shipment The Sounder 1612 is packed with custom made foam end caps and shipping box. Please keep the end caps and box for any possible return shipments. The standard shipment may contain the following items: ... -
Page 5: Description
20 lbs 9 kg The information contained in this documents is proprietary of Knudsen Engineering Limited. Any disclosure, use, or reproduction of this information for other than the specific purpose intended is expressly prohibited unless agreed to in writing by Knudsen. -
Page 6: Installation
The communications link from the Sounder 1612 to the PC is via USB (full speed 2.0). A USB Communications Cable (D219-05424) is provided with the shipment. -
Page 7: Usb Interface
For additional system protection there is a circuit breaker located next to the Main Power Switch. 4.4.3 Serial Number Plate The Sounder 1612 Part Number and Serial Number are located on the ID plate located on the lid of the echosounder case. This information may be asked for during support. -
Page 8: System Operation
Digital Gain: scale factor applied during the digital signal processing. The information contained in this documents is proprietary of Knudsen Engineering Limited. Any disclosure, use, or reproduction of this information for other than the specific purpose intended is expressly prohibited unless agreed to in writing by Knudsen. -
Page 9: Depth Detection
Tx Blanking can be adjusted accordingly. The information contained in this documents is proprietary of Knudsen Engineering Limited. Any disclosure, use, or reproduction of this information for other than the specific purpose intended is expressly prohibited unless agreed to in writing by Knudsen. -
Page 10: Basic Troubleshooting
The information contained in this documents is proprietary of Knudsen Engineering Limited. Any disclosure, use, or reproduction of this information for other than the specific purpose intended is expressly prohibited unless agreed to in writing by Knudsen. -
Page 11: Cable Connections
Center Pin: Signal Shell: Ground The information contained in this documents is proprietary of Knudsen Engineering Limited. Any disclosure, use, or reproduction of this information for other than the specific purpose intended is expressly prohibited unless agreed to in writing by Knudsen.
Need help?
Do you have a question about the 1612 and is the answer not in the manual?
Questions and answers