Parameter; Audio; Surround Parameters; Audyssey Settings - Denon AVR-3808CI Owner's Manual

ENGLISH
Input
CD DVD HDP TV/CBL
source
Default Coaxial Coaxial Coaxial
None
setting 3 1 2
z: When a DENON DVD player and the DENON LINK have been
connected, be sure to make a setting to "DENON LINK".
When "HDMI Control" is set to "ON", the digital input connector
assigned to "TV/CBL" changes to "Optical3".
NOTE
• This cannot be set for input sources for which "iPod dock" is
assigned.
• When an input source to which "DENON LINK" has been assigned
is selected in the MAIN ZONE, the PCM signal and network audio
signal (Internet radio, music server or USB) input from the digital
input connector cannot be output to the analog REC OUT connector
or multizone.
Component
Select component video input to assign to this source.
[Input source] DVD HDP
DVR V.AUX
1 2 3
[Selectable items]
Input
DVD HDP TV/CBL SAT
source
Default Component Component Component
None
setting 1 2 3
NOTE
This cannot be set for input sources for which "iPod dock" or "SIRIUS"
is assigned.
SIRIUS
Assign SIRIUS to this source.
CD DVD HDP
[Input source]
DVR V.AUX
[Selectable items] Assign None
NOTE
• "SIRIUS" and "iPod Dock" cannot both be assigned.
• When "SIRIUS" is assigned to the input source, "232C Port"
(vpage 5) cannot be set. In addition, External Controller and 2-way
Remote cannot be used.

SAT VCR DVR V.AUX
Optical Optical Optical Optical
1 3 2 4

Parameter

Audio

Adjust various audio parameters.
F Menu tree F
Parameter
Audio
a Surround Parameters
TV/CBL SAT VCR Adjust surround sound parameters.
The adjustable parameters differ for the different surround
modes.
None
SB CH Out
VCR DVR V.AUX
Select playback mode for surround back channels.
[Selectable items]
None None None
NON MTRX
z3
ES MTRX
z1: This can be selected when "Surround Back" is set to "2spkrs"
at the GUI menu "Manual Setup" – "Speaker Setup" – "Speaker
Configuration" setting.
z2: This can be selected when "Surround Back" is set to "2spkrs"
or "1spkr" at the GUI menu "Manual Setup" – "Speaker Setup"
–"Speaker Configuration" setting.
TV/CBL SAT VCR
z3: This can be selected when playing DTS sources.
z4: This can be selected when playing DTS sources including a
discrete 6.1-channel signal identification signal.
When using the surround back speaker, you can change the "SB
CH Out" setting by pressing
a Surround Parameters
s Audyssey Settings
)
(for Multi-channel sources
z1
MTRX ON PL II x CINEMA PL II x MUSIC
z4
ES DSCRT DSCRT ON OFF
STANDARD
.
s Audyssey Settings
Select Room EQ, Dynamic EQ and Dynamic Volume.
Room EQ
[Selectable items]
Audyssey
: O ptimize frequency response of all speakers.
Audyssey Byp. L/R
: O ptimize frequency response of speakers
except front L and R speakers.
Audyssey Flat
: O ptimize frequency response of all speakers
to flat response.
Manual
: A pply frequency response set with "Manual
EQ".
OFF
: T urn equalizer off.
Operating from the main unit or main remote

control unit

ROOM EQ
Press .
OFF Audyssey
Manual
• When "Audyssey", "Audyssey Byp. L/R" or "Audyssey Flat" is
selected, " " lights.
• After running Auto Setup, if the Speaker Configuration, Distance,
Channel Level, and Crossover Frequency have changed without
increasing the number of speakers measured, only "
z2 lights.
• "Audyssey", "Audyssey Byp. L/R" and "Audyssey Flat" can be
selected after the auto setup procedure has been performed.
• After performing "Auto Setup", the "Room EQ" setting automatically
becomes "Audyssey".
• If the settings of speakers for which "None" has been determined
at "Auto Setup" are changed, "Audyssey", "Audyssey Byp. L/R"
and "Audyssey Flat" cannot be selected. Either perform Auto Setup
again, or return to the setting after running Auto Setup with "Auto
Setup" – "Parameter Check" – "Restore".
• When using headphones or EXT. IN mode, "Room EQ" cannot
used.
Audyssey Byp. L/R
Audyssey Flat
"