Installation
Instructions
BEFORE YOU BEGIN
Read these instructions completely and carefully.
• IMPORTANT –
Save these instructions for local
inspector's use.
• IMPORTANT –
Observe all governing codes and
ordinances.
• Note to Installer –
Be sure to leave these
instructions with the Consumer.
• Note to Consumer –
This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and the word "DANGER", "WARNING", or "CAUTION". These
words are defined as:
DANGER
Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
Indicates a hazardous situation which, if not avoided, may result in minor or moderate injury.
WARNING
Use this oven only for its intended purpose. Never use the oven for warming or heating a room.
Prolonged use of the oven without proper ventilation can be hazardous.
IMPORTANT
If the information in this manual is not followed exactly, a fire or electrical shock may result that
could cause property damage, personal injury or death.
WARNING
To reduce the risk of tipping, the Drawer Microwave must be secured by a properly installed Anti-
Tip block.
• This Drawer Microwave must be electrically grounded in accordance with local codes.
• Make sure the wall coverings and the cabinets around the Drawer Microwave can withstand the heat generated by
the Drawer Microwave.
WARNING
Never leave children alone or unattended in the area where a Drawer Microwave is in use.
Never leave the drawer open when the microwave is unattended.
Keep these instructions for
Drawer
Microwave
future reference.
• Skill level – Installation of this appliance requires
basic mechanical and electrical skills.
• Proper installation is the responsibility of the installer.
• Product failure due to improper installation is not
covered under the Warranty.
PWL1126
31-7000249 Rev. 1 03-24
Need help?
Do you have a question about the Profile PWL1126 and is the answer not in the manual?
Questions and answers