Page 2
Thank you for purchasing the Suhr Shiba Drive™ pedal. Please take the time to read this manual to get the most out of your pedal. The more you familiarize yourself with the features of this pedal, the more you will enjoy its benefits and maximize its potential.
Page 3
OPERATION Install a 9V battery or use a suitable 9Vdc, center negative power supply. Plug your guitar into the input jack and connect your amp to the output jack. Note: Connecting a cable to the input jack will power up the pedal. If using the internal battery, remember to unplug your cable from the input jack when you are done playing in order to insure a long battery life.
Page 4
Drive: Adjusts the amount of overdrive added to your tone, taking you from a bluesy crunch to a smooth sustained overdrive. Level: Adjusts the output of the pedal. Shiba provides enough level to push the front end of any tube amp into natural overdrive. Tone: Shapes the overall tonal response of the pedal - from smooth and warm to cutting lead tones.
EXCLUSIVE FEATURES: True Bypass: Shiba Drive is true bypass via a relay. This function allows for the remote switching, and the battery monitor feature. The relay produces less popping when switching the pedal on and off. FX Link: The FX Link can be utilized to remotely control the pedal. Shorting between the shield and the tip will activate the pedal.
Our international distributors are set up to handle warranty issues in their respective countries. If you do not have an authorized Suhr dealer in your country, please contact us direct for further details.
Need help?
Do you have a question about the Shiba Drive and is the answer not in the manual?
Questions and answers