Page 1
Metal daybed with trundle Twin White Weight Limit: Thank you for purchasing from DHP! Daybed: 400 Lb / 181 Kg Trundle: 250 Lb / 113 Kg DO NOT RETURN TO THE STORE ! If parts are missing or damaged, we will gladly ship your replacement parts free of charge.
Warranty Information Read Before Beginning Assembly DHP warrants this product to be free from defects in material and workmanship and Call our toll free number if you need assistance. agrees to remedy any such defect. This warranty covers one year from the date of Work in a spacious area and near where the unit will be used, preferably on a original purchase.
Page 3
Parts for Daybed Replacement Parts, visit www.dhpfurniture.com/eng/replacement-parts All in 1 big box! There are inner box(es) that include components required to complete this assembly. Before you throw the package, please use the Post Post Post End Guard Rail End Guard Rail Check Box to identify the parts and ensure that T945040 T945050...
Page 4
Parts for Trundle Replacement Parts, visit www.dhpfurniture.com/eng/replacement-parts All in 1 big box! There are inner box(es) that include components required to complete this assembly. Before you throw the package, please use the Side Rail Slats Locking Caster End Rail Check Box to identify the parts and ensure that T949260 T922100 T910300...
Page 5
Hardware Pack for Daybed Hardware Pack #: T5545196-01 1/4" 5/16" X 3/4" 1/4" X 3/4" 1/4" X 2 9/16" Please do not completely tighten all the hardware, until the entire assembly is complete, unless otherwise indicated in the step-by-step instructions. The screw(s), bolt(s) to be used at each step are shown in actual size in the lower right corner of the page.
Page 6
Hardware Pack for Trundle Hardware Pack #: T5585096-02 1/4" 1/4" X 5/8" Wrench 1/4" X 1 5/16" Please do not completely tighten all the hardware, until the entire assembly is complete, unless otherwise indicated in the step-by-step instructions. The screw(s), bolt(s) to be used at each step are shown in actual size in the lower right corner of the page.
Page 7
Step 1 The following instructions will illustrate how to assemble the Daybed from Step 1 to Step 7. Please use the Daybed Hardware Pack: T5545196-01. Insert A into I with...
Page 10
Step 4 4.1 Insert I and T into F. 4.2 Attach I and T to F with Rear view...
Page 11
Step 5 Wide side of the slot should be facing up ! Attach J to A, C, I & T with...
Page 12
Step 6 6.1 Insert O into F and J as illustrated. 6.2 lock O into place with Y.
Page 13
Step 7 7.1 Press W onto O as illustrated. 7.2 Press Q onto W alternating left and right as illustrated.
Page 14
Step 8 Wide side of the slot should be facing up ! The following instructions will illustrate how to assemble the Trundle from Step 8 to Step 12. Please use the Trundle Hardware Pack: T5585096-02. Attach N x 2 to one E with The Lever "OFF"...
Page 15
Step 9 Wide side of the slot should be facing up ! Attach N x 2 to the other E with...
How to lock caster! How to unlock caster! Helpful Hints Helpful Hints To use Trundle: Pull out the trundle completely from underneath daybed. Once positioned, make sure casters are locked by pushing down the lever " " as illustrated "How to lock caster!".
Page 20
Move your new furniture carefully, with two people lifting and carrying the unit to its new location. Your DHP furniture can be disassembled and reassembled to move. Some parts have been pre-assembled for this item. They are illustrated on this page and available for replacement.
Page 21
Trabaje en un rea espaciosa y cerca de donde su producto ser utilizado, preferiblemente sobre una alfombra o utilice el cart n del empaque para proteger su DHP garantiza que este producto est libre de defectos de f brica en la mano de obra piso y su producto.
Page 22
Partes Instrucciones Las instrucciones siguientes ilustrar n c mo ensamblar el Div n del Paso 1 al Piezas de reemplazo, visite www.dhpfurniture.com/spa/replacement-parts Paso 7. Utilice el paquete Daybed Hardware:T5545196-01. Insertar A dentro de I con Todo se incluye en 1 caja grande! Paso 2 Hay 1 caja(s) interna(s) que incluyen los componentes necesarios para Insertar C dentro de T con...
Page 23
Mueva sus muebles nuevos con cuidado, con dos personas levantando y llevando el aparato a su nueva ubicaci n. Sus muebles DHP se pueden desmontar y volver a ensamblar en caso de mudanza. Algunas partes han sido pre-ensambladas en este producto. Se encuentran ilustradas en esta p gina y disponibles para reemplazo.
Travailler dans un endroit spacieux et pr s du lieu o l'unit sera utilis e, pr f rablement sur un tapis, ou sur un morceau de l'emballage pour prot ger le DHP garantit que ce produit est exempt de tout vice de mat riaux et de fabrication et plancher et le produit.
Page 25
Pi ces Instructions Pi ces de rechange, visitez www.dhpfurniture/fre/replacement-parts tape 1 Les instructions suivantes illustrent comment assembler la M ridienne de tape 1 tape 7. s'il vous pla t utiliser le l'emballage coque:T5545196-01. Tout dans 1 grosse bo te! Ins rer A dans I avec Il y a des bo tes int rieures qui contiennent les composants pour completer tape 2 l'assemblage.
D placez votre nouveau mobilier avec soin, nous recommandons deux personnes pour soulever et transporter le mobilier vers son nouvel emplacement. Votre mobilier DHP peut tre d mont et reassembl pour faciliter les d m nagements. Certaines pi ces ont t pr -assembl es pour ce produit. Ils sont illustr s sur cette page et disponibles pour le remplacement.
Need help?
Do you have a question about the 4127139WE and is the answer not in the manual?
Questions and answers