Page 1
Upholstered Bed with Storage Full Grey Linen Weight Limit: Thank you for purchasing from DHP! Bed: 450 Lb / 204 Kg Drawer: 40 Lb / 18 Kg DO NOT RETURN TO THE STORE ! If parts are missing or damaged, we will gladly ship your replacement parts free of charge.
Page 2
Warranty Information Read Before Beginning Assembly DHP warrants this product to be free from defects in material and workmanship and Call our toll free number if you need assistance. agrees to remedy any such defect. This warranty covers one year from the date of Work in a spacious area and near where the unit will be used, preferably on a original purchase.
Page 3
Parts Replacement Parts, Visit www.dhpfurniture.com/eng/replacement-parts All in 1 big box! There are inner box(es) that include components required to complete this assembly. Headboard Footboard Side Rail Before you throw the package, please use the Back Panel Side Rail T953450 T953460 T953320 T927010 T953330...
Page 4
Parts Replacement Parts, Visit www.dhpfurniture.com/eng/replacement-parts All in 1 big box! There are inner box(es) that include components required to complete this assembly. Front Panel Drawer Bottom Panel Drawer Back Panel Drawer Side Panel Before you throw the package, please use the T953300 T953380 T953390...
Page 5
Hardware Pack Hardware Pack #: T4155429-00 1/4" X 3/4" 1/4" X 3/4" X 12 1/4" X 1 3/16" X 12 1/4" X 1 9/16" 1/4" X 1 9/16" 3/16 X 3/8" 1/4'' 3/16 X 7/8" X 24 3/16 X 1" X 56 Please do not completely tighten all the hardware, until the entire assembly is complete, unless...
Page 6
Step 1 Stick A1 to the back of A with Velcro as illustrated.
Page 11
Step 6 6.1 Attach I x2 to A and B with , then properly 6.2 Attach I x2 to K with tighten all the bolts. The slat holes should be oriented towards upside.
Page 12
Step 7 7.1 Insert P into X , 7.2 Press X into E & F , repeat the same procedure for the opposite side. 7.3 Insert ends of both slats P into Y , then press Y into I as illustrated. Repeat the same procedures going backwards for every row of slats.
Page 13
Step 8 Attach M to S and N with don't completely tighten the bolts until STEP 10 is complete. For better performance, please orient the plastic sheet towards inside of the drawer. Note: Make sure that these holes are all located on the top side before assembling X 16...
Page 14
Step 9 9.1 Attach Q to L with 9.2 Attach L to M with 9.3 Attach Q X 4 and L to S and N with X 32...
Page 15
Step 10 Attach sub-assembly L/S/N/M from previous step to C with , then properly tighten all the bolts. X 24...
Page 17
Step 12 Align Drawers with the bed frame and push them into the bed. Slot Lock drawers by slightly lifting drawer and inserting the Pin into the Slot. Slot...
Page 18
Move your new furniture carefully, with two people lifting and carrying the unit to its new location. Your DHP furniture can be disassembled and reassembled to move. Some parts have been pre-assembled for this item. They are illustrated on this page and available for replacement.
Page 19
Trabaje en un rea espaciosa y cerca de donde su producto ser utilizado, preferiblemente sobre una alfombra o utilice el cart n del empaque para proteger su DHP garantiza que este producto est libre de defectos de f brica en la mano de obra piso y su producto.
Page 20
Lea antes de comenzar a ensamblar Partes Llame a nuestro n mero gratuito si necesita asistencia. Piezas de reemplazo, visite www.dhpfurniture.com/spa/replacement-parts Trabaje en un rea espaciosa y cerca de donde su producto ser utilizado, preferiblemente sobre una alfombra o utilice el cart n del empaque para proteger su piso y su producto.
Page 21
PERNOS. llevando el aparato a su nueva ubicaci n. Paso 7 Sus muebles DHP se pueden desmontar y volver a ensamblar en caso de Inserte P en X; mudanza. Presione X en E&F; Repetir el mismo; procedimiento para la lado opuesto.
Page 22
Travailler dans un endroit spacieux et pr s du lieu o l'unit sera utilis e, pr f rablement sur un tapis, ou sur un morceau de l'emballage pour prot ger le DHP garantit que ce produit est exempt de tout vice de mat riaux et de fabrication et plancher et le produit.
Page 23
Avant de commencer l'assemblage Pi ces Si vous avez besoin d'aide, appelez notre service la client le sans frais. Pi ces de rechange, visitez www.dhpfurniture/fre/replacement-parts Travailler dans un endroit spacieux et pr s du lieu o l'unit sera utilis e, pr f rablement sur un tapis, ou sur un morceau de l'emballage pour prot ger le Tout dans 1 grosse bo te! plancher et le produit.
Page 24
D placez votre nouveau mobilier avec soin, nous recommandons deux personnes pour soulever et transporter le mobilier vers son nouvel emplacement. I x2 A Attacher avec Votre mobilier DHP peut tre d mont et reassembl pour faciliter les I x2 A Attacher avec puis serrez correctement toutes les d m nagements.