Parts And Functions; Indoor Unit - Haier HSU-09HC03/R2 - annexe 1 Operation Manual

Parts and Functions

Indoor Unit

Inlet grille
Air filter
Vertical flap
Use remote controller to
adjust up and down air flow.
(Don't adjust it manually.)
For models: HSU-09HC03/R2(DB)
Inlet grille
Air filter(inside)
Vertical flap
Use remote controller to
adjust up and down air flow.
(Don't adjust it manually.)
For model: HSU-22HC03/R2(DB)
Actual inlet grille may vary from the one shown in the manual according to the product purchased.
Timer mode indicator
Power indicator
Lights up when Timer operation
Lights up when unit starts.
is selected.
HSU-12HC03/R2(DB) HSU-18HC03/R2(DB)
Power indicator
Lights up when unit starts.
Test running switch(manual)
Used only for test running in cooling
o
when room temp. is below 16 C.
Don't use it in normal operation.
Emergency switch(manual)
Used when remote controller is lost or
defective. Unit will run temporarily.
Remote signal receiver
A beeping sound is generated when
a signal from remote controller is
received.
Operation mode indicator
Lights up during compressor
running.
Remote signal receiver
A beeping sound is generated when
a signal from remote controller is
received.
Operation mode indicator
Lights up during compressor
running.
Timer mode indicator
Lights up when Timer operation
is selected.