D-Link AirPlus DI-524 Owner's Manual page 13

Using the Configuration Menu (continued)
SSID-
Channel-
WEP-
WEP Encryption-
Key Type-
Keys 1-4-
Home > Wireless
Service Set Identifier (SSID) is the name designated for a spe-
cific wireless local area network (WLAN). The SSID's factory
default setting is default. The SSID can be easily changed to
connect to an existing wireless network or to establish a new
wireless network.
6 is the default channel. All devices on the network must share
the same channel. (Note: The wireless adapters will automati-
cally scan and match the wireless setting.)
Wired Equivalent Privacy (WEP) is a wireless security protocol
for Wireless Local Area Networks (WLAN). WEP provides se-
curity by encrypting the data that is sent over the WLAN. Select
Enabled or Disabled. Disabled is the default setting. (Note: If
you enable encryption on the DI-524 make sure to also enable
encryption on all the wireless clients or wireless connection will
not be established.)
Select the level of encryption desired: 64-bit, or 128-bit.
Select HEX or ASCII.
Input up to 4 WEP keys; select the one you wish to use.
13