Advertisement
Quick Links
Operating Specifications
Power Source:
Temperature Range:
Operating Temperature:
Operating Environment:
Storage Temperature:
Approvals:
Compliance:
Warmer's Specifications
Exterior Dimensions:
Exterior:
Interior:
Capacity :
Thermo-control:
Indicator System:
Net Weight:
Insulation:
Door:
Heater:
Initial heat-up time:
Heat-up with product:
Copyright Quincy Lab Inc. 2024
Read Operating Instructions Thoroughly Prior to Operating Warmer.
AC 115 (+/-10%),
60HZ,
100°F (37.7°C) minimum - 125°F maximum
Factory preset to 125°F
Indoor use, Ambient Conditions 10°C / 50°F to 35°C / 95°F,
80% RH maximum.
-10°C / 14°F to 70°C / 158°F, 70% RH maximum
Underwriter's UL / CUL, United States / Canadian for laboratory equipment.
UL Standard 61010-1, IEC 61010-1.
12.875"W x 17.00"H x 13.37"D
Powder-coated steel
High-grade aluminum
16 Theraworx Protect packages
Digital temperature controller
Bi-color LEDs
24.5 Lbs.
Silica-based fiberglass
High-optic acrylic
Resistive-tubular incoloy
20 minutes (empty)
30 - 40 minutes (with product)
www.theraworxpro.com
Advanced Hygiene and Barrier System
Standard Content
(1) Personal Care Warmer
(1) Detachable Power Cable
Model PatientCare WARMER 16S
Max Watts: 250
Symbols
WARNING
Possible electrical shock
WARNING
Fire risk
IMPORTANT
Usage guidelines
877-677-2723
PAGE 1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Quincy lab Theraworx Avadim HEALTH PatientCare WARMER 16S
Summary of Contents for Quincy lab Theraworx Avadim HEALTH PatientCare WARMER 16S
- Page 1 Net Weight: 24.5 Lbs. Insulation: Silica-based fiberglass WARNING Door: High-optic acrylic Fire risk Heater: Resistive-tubular incoloy IMPORTANT Initial heat-up time: 20 minutes (empty) Usage guidelines Heat-up with product: 30 - 40 minutes (with product) Copyright Quincy Lab Inc. 2024 PAGE 1...
- Page 2 Safety Precautions Read Operating Instructions Thoroughly Prior to Operating Warmer. Before powering the warmer on, remove all packing materials and examine the warmer for any damage (broken door handles, missing door magnets, or dents). Notify your Theraworx representative if the warmer is damaged. This warmer heats Theraworx wipes to a patient-safe temperature and uses a system of safeguards to protect against an over-temperature condition.
- Page 3 Safety Alarms Reset (continued) Thermal safety alarm - Snap Disc. To protect the warmer’s electrical components and for the safety of the user, if the unit exceeds its maximum temperature, an internal safety snap disc will cut power OFF to the warmer until it is manually reset. To reset: 1.
- Page 4 2. Verify the warmer is not in an alarm condition - See Electronic over-temperature alarm on page 2 to clear alarm condition. If problem persists, contact technical support. Technical Support For questions regarding: General Product Information, please contact: Avadim Health 1-877-677-2723 Technical Support/Parts Order, please contact: Quincy Lab. 1-800-482-4328 PAGE 4...
Need help?
Do you have a question about the Theraworx Avadim HEALTH PatientCare WARMER 16S and is the answer not in the manual?
Questions and answers