Felicitysolar LPBF24100-M User Manual

Lifepo4 battery system for households

Advertisement

Make life full of hope
USER GUIDE
LiFePO4 Battery System for Households
LiFePO4 Battery System for Households
358-010329-00A

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LPBF24100-M and is the answer not in the manual?

Questions and answers

Summary of Contents for Felicitysolar LPBF24100-M

  • Page 1 Make life full of hope USER GUIDE LiFePO4 Battery System for Households LiFePO4 Battery System for Households 358-010329-00A...
  • Page 2 Contents...
  • Page 3: About This Manual

    LiFePO4 Battery System for Households LiFePO4 Battery System for Households 1 ABOUT THIS MANUAL 2. INTRODUCTION The battery system main using Solar power system for Family house. It also have a with to controller the 1.1 Purpose battery easily and protect our Household application timely. This manual describes the introduction, installation, operation and emergency situations of the battery bank.
  • Page 4: Specifications

    LiFePO4 Battery System for Households LiFePO4 Battery System for Households 2.3 Specifications LPBF24100-M 2.5KWH 25.6 24-28.8 110A@120S ≤60A 2750W 1500W 22KG 26KG 345x430x195MM 437x527x243MM RS485 com line 2.4 Recommended Settings Lithium battery pack is not same as lead-acid battery, so for the devices which you connect with the battery pack for charging or discharging, such as inverters, MPPT charger controllers or UPS, please implement pre-settings as recommended settings as below before you launched them.
  • Page 5 LiFePO4 Battery System for Households LiFePO4 Battery System for Households Please follow below steps to implement battery connection: Note: After completing the above 4 steps, arbitrarily select the positive and negative poles of one of the battery packs to output Assemble battery ring terminal based on recommended battery cable and terminal size.
  • Page 6: Switch On/Off

    Make life full of hope current or watt Short press the switch button to switch watt and current 4.1 Switch On / Off 1.Switch on: press On/Off button to switch on the battery, then the battery will do self-inspection before enable output.
  • Page 7 Eg: Rated voltage is "25.6V"; model is "2.50KWH", Eg: "23.2V" / "2.40KW" / "70%" refers to battery voltage. "01"is the countdown. power and SOC. Eg: "26.2V" / "60A" / "70%" refers to battery voltage. Eg:"26.2V" / "C09" / "70%" are battery voltage, fault current and SOC.
  • Page 8: Emergency Situations

    5. EMERGENCY SITUATIONS Felicity cannot guarantee eStrong battery absolute safety. 5.1 Fire In case of fires, make sure that the following equipment is available near the system. • SCBA (self-contained breathing apparatus) and protective gear in compliance with the Directive on Personal Protective Equipment 89/686/EEC.

Table of Contents