D-Link DWL_7100 Manual page 14

Using the Configuration Menu (continued)
Advanced > Mode
Choose 802.11a or
802.11g wireless
band; then select
from the following
options:
Access Point:
Select this mode to
create a WLAN
(wireless local area
network).
PtP Bridge (Point
to Point Bridge):
This mode enables
you to connect two
WLANS.
Remote AP MAC
Address: Input the
Remote
Remote
remote AP MAC
address of the AP
with which the
DWL-7100AP will
associate.
PtMP Bridge (Point to Multi-Point Bridge): This mode enables you to connect multiple
WLANs
Remote AP MAC Address: Input the remote AP MAC Addresses of the APs with which
the DWL-7100AP will associate
AP Repeater: To extend the range of the wireless network select this option and enter
the MAC address of the remote AP within your network that will have its range extended.
Remote AP MAC Address: Enter the MAC address of the remote AP within your network
that will have its range extended.
Apply: Click Apply if you have made any changes.
14