D-Link DWL_7100 Manual page 12

Using the Configuration Menu (continued)
Home > Wireless
Note: In the Configuration screens that follow, you will be able to
configure settings for 802.11a and 802.11g devices in your network.
Settings that you input for 802.11g devices will also apply to
802.11b devices in your network.
Wireless
Band-
SSID- Service Set Identifier (SSID) is the name designated for a specific wire-
less local area network (WLAN). The SSID's factory default setting is
default. The SSID can be easily changed to connect to an existing
wireless network or to establish a new wireless network.
SSID
Broadcast-
Enable or Disable SSID Broadcast. Enabling this feature broadcasts the
SSID across the network.
Channel-
6 is the default channel. All devices on the network must share the same
channel.
Radio
Frequency- The radio frequency will remain at 2.437GHz .
Apply-
Click Apply to save the changes.
Select 802.11g or 802.11a from the pulldown menu.
12