Speakerphone Introduction The USB/Wireless devices Keypad LED Status Indicator The Bluetooth devices Keypad LED Status Indicator How to Use Speakerphone Wireless Connection In/Out Connection Installation and Use of Extension Unit (Optional) Please Note Bluetooth Not Applicable To This Product Version (VC2000W)
Accessories 4-Strand 5m RJ45 Cable Extension Unit 3.5MM Cable If any items are missing or damaged, contact your place of purchase immediately. Do not use damaged products! Interface Specication Power switch Line in/out port USB port RJ45 port Extension Unit (Optional) RJ45 port...
Introduction The USB/Wireless device Keypad Turn down/up the volume Volume button Turn on/o the speaker Speaker Mute Answer/End calls Answer/End calls Turn on/off the Microphone Mute Microphone LED Status Indicator Working status indicator/ volume status indicator Wireless status indicator Microphone status indicator Power status indicator Key indicator...
Power status indicator Green light on Speakerphone working normally Green light ashing Wireless pairing state Wireless status indicator (The Wireless device apply) Green light on Wireless connected Red light on Microphone mute Microphone working normally/The brightness Working status indicator/ of status LED will Green light on Volume status indicator increase or decrease...
LED Status Indicator Working status indicator/ volume status indicator Bluetooth status indicator Microphone status indicator Power status indicator Key indicator Red light on Low battery, must be recharged Green light ashing Charging Power status indicator Green light on The battery is fully charged. Green light ashing Bluetooth pairing state Bluetooth status...
How to Use Connection Steps for USB 1.Using the supplied USB cable; Connect one end of the USB cable to the, speakerphone and the other end to the computer or other communication device 2.Turn on the power switch after conrming the correct connection on; It will take a few seconds to install the driver automatically for the rst setup, the computer prompts the drive installation success.
Note: When Bluetooth fails to connect within 40 seconds, Bluetooth needs to be restarted. In/out Connection Use a 3.5mm 4-strand cable to connect your phone or PC device to the "I/O" port of the speakerphone. If the device connection port is a 3.5mm 3-strand port, you need a transfer adapter for connecting.
Page 10
Microphone Status indicator RED: Microphone muted GREEN: Microphone working normally Note: Ensure the main unit is properly connected to the extension unit, before switching on. Main Unit Extension Unit Connection diagram...
Need help?
Do you have a question about the VC2000W and is the answer not in the manual?
Questions and answers