Mounting Recommendations - Alarm.Com ADC-V729 Installation Manual

Overview
Requirements
• Ensure the unit is properly grounded.
• The ADC-V729AC must be installed on a weatherproof junction box (not included in the box).
*Requirements for the ADC-V729AC
Caution: There is a risk of electrical shock when installing the ADC-V729AC. Ensure the power is off at the circuit
breaker before doing any work.
Ensure you follow local safety codes for installation. In certain locations, a professional electrician must perform the
installation.
• The ADC-V729AC must be installed on a weatherproof junction box (not included in the box).
• Connect the fixture to a 100-240VAC 50/60 Hz power source. Wire connection should be using gauge range 14-18
AWG and rated to Min. temperature 80°C. Ensure you follow local safety codes.
• Ensure the unit is properly grounded.
• For best results, we recommend a junction box that meets these specifications (junction box not included):
◦ A 4-inch round/square junction box (the base of the 729 is 5.9 inches)
◦ Weatherproof
◦ Outdoor rated
• Remove any existing light fixture and metal bracket on the junction box.
Mount the ADC-V729AC
Caution: There is a risk of electrical shock when installing the ADC-V729AC. Ensure the power is off at the circuit
breaker before doing any work.

Mounting recommendations

Note: For optimal PIR motion detection performance, it is recommended to install the ADC-V729 at a height of eight feet
with the camera pointed downwards at a 30° angle.
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/4MP_Outdoor_Floodlight_Camera_(ADC...
Updated: Tue, 06 Aug 2024 18:15:46 GMT
2