1. Manuals
  2. Brands
  3. Woodstock Manuals
  4. Planer
  5. Shop fox W1742H
  6. Manual

Woodstock Shop fox W1742H Manual

15" planer w/mobile base and helical cutterhead
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Model W1742H
15" Planer w/Mobile Base
and Helical Cutterhead
Manual Insert
Phone #: (360) 734-3482 • Tech Support: techsupport@woodstockint.com • Web: www.woodstockint.com
The Model W1742H is the same as the Model W1742, except it has a helical cutterhead. Besides
differences noted in this insert, the content in the Model W1742 owner's manual is the same for both
machines. Before operating your new machine, you MUST read and understand this insert and the entire
Model W1742 manual to reduce the risk of injury from improper use or setup.
If you have any further questions about this manual insert or the differences between the
Model W1742H and the Model W1742, contact our Technical Support at (360) 734-3482 or email
techsupport@woodstockint.com.
COPYRIGHT © MARCH, 2020 BY WOODSTOCK INTERNATIONAL, INC.
WARNING: NO PORTION OF THIS PUBLICATION MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT
THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.
#20921CS
Printed in China

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Shop fox W1742H and is the answer not in the manual?

Questions and answers

Related Manuals for Woodstock Shop fox W1742H

Summary of Contents for Woodstock Shop fox W1742H

  • Page 1 Model W1742H and the Model W1742, contact our Technical Support at (360) 734-3482 or email techsupport@woodstockint.com. COPYRIGHT © MARCH, 2020 BY WOODSTOCK INTERNATIONAL, INC. WARNING: NO PORTION OF THIS PUBLICATION MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.
  • Page 2 Model W1742H (For Machines Mfd. Since 01/20) MODEL W1742H 15" PLANER WITH MOBILE BASE AND HELICAL CUTTERHEAD Product Dimensions Weight......................600 lbs. Width (side‐to‐side) x Depth (front‐to‐back) x Height........42 x 32‐1/2 x 46 in. Footprint (Length x Width)................. 22‐1/2 x 22 in. Shipping Dimensions Type.......................
  • Page 3 Model W1742H (For Machines Mfd. Since 01/20) Main Specifications Main Specifications Max. Cut Width................... 15 in. Max. Cut Height.................... 8 in. Min. Stock Length..................8 in. Min. Stock Thickness.................. 3/16 in. Max. Stock Thickness..................8 in. Number of Cuts Per Inch................104, 56 Number of Cuts Per Minute................
  • Page 4 Model W1742H (For Machines Mfd. Since 01/20) Other Country of Origin ....................China Warranty ....................... 2 Years Approximate Assembly & Setup Time ..............30 Minutes Serial Number Location ..................ID Label Certified by a Nationally Recognized Testing Laboratory (NRTL) ......... Yes Features Helical Cutterhead with 75 Indexable Carbide Inserts Built‐In, Easy‐to‐Use Mobile Base...

  • Page 5: Standard Machinery Safety Instructions

    Model W1742H (For Machines Mfd. Since 01/20) SAFETY SAFETY For Your Own Safety, Read Manual Before Operating Machine The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words intended to convey the level of importance of the safety messages.
  • Page 6 INTENDED USAGE. Only use machine for its keep machine in good working condition. A intended purpose—never make modifications machine that is improperly maintained could without prior approval from Woodstock malfunction, leading to serious personal injury International. Modifying machine or using or death.

  • Page 7: Additional Safety For Planers

    Model W1742H (For Machines Mfd. Since 01/20) Additional Safety for Planers Amputation, serious cuts, entanglement, or death can occur from contact with rotating cutterhead or other moving parts! Flying chips can cause eye injuries or blindness. Workpieces or knives thrown by cutterhead can strike nearby operator or bystanders with deadly force. To reduce risk of these hazards, operator and bystanders MUST completely heed hazards and warnings below.

  • Page 8: Circuit Requirements

    Model W1742H (For Machines Mfd. Since 01/20) ELECTRICAL Circuit Requirements This machine must be connected to the correct size and The machine must be properly set up type of power supply circuit, or fire or electrical damage before it is safe to operate. DO NOT may occur.

  • Page 9: Grounding Requirements

    Model W1742H (For Machines Mfd. Since 01/20) Grounding Requirements This machine MUST be grounded. In the event of certain The machine must be properly set up types of malfunctions or breakdowns, grounding provides before it is safe to operate. DO NOT a path of least resistance for electric current to travel—in connect this machine to the power order to reduce the risk of electric shock.
  • Page 10 Model W1742H (For Machines Mfd. Since 01/20) SETUP Unpacking This machine has been carefully packaged for safe transportation. If you notice the machine has been damaged during shipping, please contact your authorized Shop Fox dealer immediately. Inventory When ordering replacement parts, The following is a list of items shipped with your machine.
  • Page 11 Model W1742H (For Machines Mfd. Since 01/20) Dust Hood The dust hood included should only be installed if you plan on hooking your planer up to a dust collection system. To install the dust hood, do these steps: 1. Secure the top of the dust hood with (3) M6-1 x 10 hex bolts, (6) 6mm flat washers, and (3) M6-1 hex nuts (see Figure 4).
  • Page 12 Model W1742H (For Machines Mfd. Since 01/20) Test Run Once assembly is complete, test run the machine to ensure it is properly connected to power and safety components are functioning properly. Serious injury or death can result from using this machine BEFORE If you find an unusual problem during the test run, understanding its controls and related immediately stop the machine, disconnect it from power,...

  • Page 13: Rotating/Replacing Cutterhead Inserts

    Model W1742H (For Machines Mfd. Since 01/20) MAINTENANCE Rotating/Replacing Cutterhead Inserts The helical cutterhead is equipped with indexable carbide inserts that can be rotated to reveal any one of its four cutting edges. If one edge of the insert becomes dull or damaged, simply rotate it 90˚...
  • Page 14 Model W1742H (For Machines Mfd. Since 01/20) 6. Remove Torx screw and insert (see Figure 7), then clean all dust and debris from both parts and cutterhead pocket. Torx Screw Note: Proper cleaning of insert, Torx screw, and cutterhead pocket is critical to achieving a smooth finish.

  • Page 15: Electrical Safety Instructions

    Model W1742H (For Machines Mfd. Since 01/20) Electrical Safety Instructions These pages are current at the time of printing. However, in the spirit of improvement, we may make changes to the electrical systems of future machines. Compare the manufacture date of your machine to the one stated in this manual, and study this section carefully.

  • Page 16: Wiring Diagram

    Model W1742H (For Machines Mfd. Since 01/20) Wiring Diagram CONTROL PANEL Ground SHOCK HAZARD! Disconnect power before servicing electrical parts. Touching electrified parts will result in severe burns, electrocution, or death. Start Stop Power Ground 240V MAG SWITCH ASSY 6-20 Plug Read Page 15 STOP...

  • Page 17: Electrical Components

    Model W1742H (For Machines Mfd. Since 01/20) Electrical Components Contactor Stop Start Power Button Motor Button Lamp Junction Relay Figure 9. Control panel wiring. Figure 11. Magnetic switch assembly wiring. Run Capacitor Start Capacitor Figure 10. Motor junction box wiring. -17-...
  • Page 18 Model W1742H (For Machines Mfd. Since 01/20) PARTS Cabinet 30-7 30-8 30-1 30-6 30-10 30-2 30-9 30-4 30-5 72-1 72-3 72-2 -18-...

  • Page 19: Cabinet Parts List

    Model W1742H (For Machines Mfd. Since 01/20) Cabinet Parts List PART # DESCRIPTION PART # DESCRIPTION X1742H001 RUBBER FEET X1742H042 SET SCREW M6-1 X 12 X1742H002 STRAIN RELIEF X1742H043 MOTOR PLATE X1742H003 UNIVERSAL PULLEY X1742H044 FLAT HD SCR M6-1 X 20 X1742H004 HEX NUT M8-1.25 X1742H045...
  • Page 20 Model W1742H (For Machines Mfd. Since 01/20) Headstock 133-1 133-2 133-3 163V2 -20-...

  • Page 21: Headstock Parts List

    Model W1742H (For Machines Mfd. Since 01/20) Headstock Parts List PART # DESCRIPTION REF PART # DESCRIPTION X1742H101 HANDLE X1742H150 BALL BEARING 6205-2RS X1742H102 HEX NUT M12-1.75 X1742H151 HEX BOLT M6-1 X 16 X1742H103 FLAT WASHER 12MM X1742H152 FLAT WASHER 6MM X1742H105 HANDWHEEL X1742H153 SPROCKET...
  • Page 22 Model W1742H (For Machines Mfd. Since 01/20) Gearbox PART # DESCRIPTION PART # DESCRIPTION X1742H201 GEAR BOX X1742H222 FLAT WASHER 6MM X1742H202 HEX BOLT M6-1 X 25 X1742H223 COMPRESSION SPRING X1742H203 SPROCKET X1742H224 STEEL BALL 4MM X1742H204 FLAT WASHER 8MM X1742H225 GEAR X1742H205...
  • Page 23 Model W1742H (For Machines Mfd. Since 01/20) Lower Table PART # DESCRIPTION PART # DESCRIPTION X1742H301 CHAIN 12.7 AX 134 X1742H316 GEAR X1742H302 HEX BOLT M12-1.75 X 45 X1742H317 KEY 4 X 4 X 12 X1742H303 FLAT WASHER 12MM X1742H318 EXT RETAINING RING 12MM X1742H304 LIFTING BAR...

  • Page 24: Upper Table

    Model W1742H (For Machines Mfd. Since 01/20) Upper Table PART # DESCRIPTION PART # DESCRIPTION X1742H401 SET SCREW M8-1.25 X 20 X1742H410 X1742H404 HEX BOLT M8-1.25 X 30 X1742H411 LOCK BAR X1742H405 FLAT WASHER 8MM X1742H412 SET SCREW M6-1 X 16 X1742H406 LOCK WASHER 8MM X1742H413...

  • Page 25: Labels & Cosmetics

    INVENTORY COMPONENTS HANG TAG FOR SHOP FOX MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK SF LOGO YEL WITHOUT WRITTEN APPROVAL! Woodstock will not accept labels changed without SF BL approval. If artwork changes are required, contact us immediately at manuals@woodstockint.com.

  • Page 27: Warranty

    Woodstock International, Inc. will repair, replace, or arrange for a dealer refund, at its expense and option, the Shop Fox machine or machine part proven to be defective for its designed and intended...
  • Page 29 163V2 X1742163V2 OUTFEED ROLLER (RUBBER) V2.09.17 (W1742) 163V2 X1742S163V2 OUTFEED ROLLER (RUBBER) V2.09.17 (W1742S) COPYRIGHT © AUGUST, 2017 BY WOODSTOCK INTERNATIONAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.
  • Page 30 Access Loose Components Shipped with Planer COPYRIGHT © MAY, 2013 BY WOODSTOCK INTERNATIONAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC. #15806BL Printed in China...
  • Page 31 503V2 X1742S503V2 ID LABEL CSA V2.07.12 (W1742S) 30A-8 XP6203ZZ BALL BEARING 6203ZZ COPYRIGHT © AUGUST, 2012 BY WOODSTOCK INTERNATIONAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.
  • Page 32 Model W1742/W1742S (Mfg. Since 7/12) SAFETY SAFETY For Your Own Safety, Read Manual Before Operating Machine The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words intended to convey the level of importance of the safety messages.
  • Page 33 INTENDED USAGE. Only use machine for keep machine in good working condition. A its intended purpose and never make machine that is improperly maintained could modifications not approved by Woodstock. malfunction, leading to serious personal injury Modifying machine or using it differently or death.
  • Page 34 Model W1742/W1742S (Mfg. Since 7/12) Additional Safety for Planers PLANER INJURY RISKS. Familiarize yourself with BODY PLACEMENT. Stand to one side of planer the main injury risks associated with planers— during the entire operation to avoid getting always use common sense and good judgement hit if kickback occurs.
  • Page 35 Model W1742/W1742S (Mfg. Since 7/12) ELECTRICAL Circuit Requirements This machine must be connected to the correct size and The machine must be properly set up type of power supply circuit, or fire or electrical damage before it is safe to operate. DO NOT may occur.
  • Page 36 Model W1742/W1742S (Mfg. Since 7/12) Grounding Requirements This machine MUST be grounded. In the event of certain The machine must be properly set up types of malfunctions or breakdowns, grounding provides before it is safe to operate. DO NOT a path of least resistance for electric current to travel—in connect this machine to the power order to reduce the risk of electric shock.
  • Page 37 Model W1742/W1742S (Mfg. Since 7/12) Wiring Diagram 6-20 Plug 240V MAGNETIC SWITCH ASSY...
  • Page 78 Model W1742H (For Machines Mfd. Since 01/20) Headstock 133-1 133-2 133-3 163V2 -20-...

Table of Contents