Usb; Remote Control - Yamaha RX-V373BL Owner's Manual

Problem
Radio stations cannot be selected automatically.
AM radio stations cannot be registered as
presets.

USB

Problem
The unit does not detect the USB device.
Folders and files in the USB device cannot be
viewed.

Remote control

Problem
The unit cannot be controlled using the remote
control.
Cause
Your area is too far from the FM station transmitter.
The AM radio signal is weak.
Auto Preset has been used.
Cause
The USB device is not connected to the USB jack securely.
The file system of the USB device is not FAT 16 or FAT 32.
The folder structure not supported by the unit is applied.
Cause
The unit is out of the operating range.
The batteries are weak.
The unit's remote control sensor is exposed to direct sunlight or
strong lighting.
The remote control IDs of the unit and the remote control are not
identical.
Remedy
Select the station manually (p.40).
Use an outdoor antenna. We recommend using a sensitive multi-element
antenna.
Adjust the AM antenna orientation.
Select the station manually (p.40).
Use an outdoor AM antenna. Connect it to the ANTENNA (AM) jack together with
the supplied AM antenna.
Auto Preset is for registering FM radio stations only. Register AM radio stations
manually (p.41).
Remedy
Turn off the unit, reconnect your USB device, and turn the unit on again.
Use a USB device with FAT 16 or FAT 32 format, except USB HDDs.
The unit supports folder hierarchies of up to eight levels and up to 65,000 files per
level. If necessary, modify the folder structure on your USB device.
Remedy
Use the remote control within the operating range (p.4).
Replace with new batteries.
Adjust the lighting angle, or reposition the unit.
Change the remote control ID of the unit or the remote control (p.65).
APPENDIX ➤ Troubleshooting
71
En