Adjust Volume; Playback Test Tone - Yamaha RX-V371 Quick Reference Manual

Quick reference guide
Hide thumbs Also See for RX-V371:
Table of Contents

Advertisement

8
Press Cursor B / C to select the speaker (subwoofer) that you want to confi gure, and press Cursor D / E
to set the distance.
If necessary, you can change the setting units under "Unit."
Information
Description
Unit
Switches between setting units (feet / meters).
Front L
Front speaker L
Front R
Front speaker R
Center
Center speaker
Sur. L
Surround speaker L
Sur. R
Surround speaker R
SWFR
Subwoofer
When you have completed the settings for one speaker, repeat the same procedure for all speakers to complete settings.
9
Press RETURN when setting is complete.
This completes step 3.
STEP 4: Playback a test tone
Press Cursor C repeatedly to display "Test Tone" and press ENTER.
10
Use Cursor D / E to select "On."
11
A test tone plays back from the speakers as soon as you select "On." The test tone plays back in a clockwise fashion. Only speakers
confi gured for use in procedure 5 output the test tone.
12
Check that the test tone is playing back and press RETURN.
This completes step 4.
STEP 5: Adjust the volume
Press Cursor B repeatedly to display "Level" and press ENTER.
13
14
Use Cursor B / C to switch the speaker that is
outputting the test tone, looking for speakers with
a different volume level to the others.
The front panel display shows the speaker that is outputting
the test tone.
Only speakers confi gured for use in procedure 5 output the
test tone.
If you fi nd a speaker with a different volume level to the others, use Cursor D / E to adjust the volume. Use
15
Front speaker L or R as a default when adjusting volumes.
To raise the volume: Press Cursor E.
To lower the volume: Press Cursor D.
16
Repeat steps 14 and 15 to adjust the volume balance for all speakers to your preference.
17
Press RETURN when setting is complete.
Return to the previous menu.
This completes step 5.
18
Repeat procedures 10-12 (step 4) to stop playback of the test tone.
19
Once you have completed all settings, press SETUP to close the Setup menu.
Setting
feet (ft) / meters (m)
1.0 ft to 80.0 ft (0.30 m to 24.0 m)
1.0 ft to 80.0 ft (0.30 m to 24.0 m)
1.0 ft to 80.0 ft (0.30 m to 24.0 m)
1.0 ft to 80.0 ft (0.30 m to 24.0 m)
1.0 ft to 80.0 ft (0.30 m to 24.0 m)
1.0 ft to 80.0 ft (0.30 m to 24.0 m)
Information
FL
FR
C
SL
SR
SWFR
- 7 -
TEST
VOL.
>Off
On
LEVEL
VOL.
d
  FL----d ----
Speakers
Front speaker L
Front speaker R
Center speaker
Surround speaker L
Surround speaker R
Subwoofer
SW
C
L
R
SL
SR
SW
C
R
L
SL
SR

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents