D-Link AirPro DWL-6000AP Manual page 58

2.4 ghz / 5 ghz multimode wireless access point

Hide thumbs Also See for AirPro DWL-6000AP:

Table of Contents

Troubleshooting

7. Resetting the DWL-6000AP to Factory Default Settings

After you have tried other methods for troubleshooting your network, you

may choose to Reset the DWL-6000AP to the factory default settings.

Remember that D-Link AirPro products network together, out of the box,

at the factory default settings.

To hard-reset the D-Link AirPro DWL-6000AP to Factory Default Settings,

please do the following:

Locate the Reset button on the back of the DWL-6000AP

Use a paper clip to press the Reset button

Hold for about 10 seconds and then release

After the DWL-6000AP reboots (this may take a few

minutes) it will be reset to the factory Default settings

Table of Contents