D-Link AirPro DWL-6000AP Manual page 18

Using the Configuration Menu
Advanced > Filters > WLAN Partition
Wireless Band: Select 802.11a or 802.11b
Internal Station Connection: Click on Enabled* to enable communication between
the 802.11a and 802.11b bands on your dual-band network. Deselect this box to
disallow communication between the two bands on your network. (*You will also need
to check Enabled at the Internal Station Connection Between 802.11a and
802.11b box in this screen, in order for this communication to be successful.)
Ethernet to WLAN Access: Click on Enabled to enable communication between the
wireless segment and the Ethernet segment on your network. Deselect this box to
disallow communication between the wireless segment and the Ethernet segment.
Internal Station Connection Between 802.11a and 802.11b: Click on Connection
Enabled* to allow communication between these two segments of the wireless
network. (*You will also need to check Enabled at the Internal Station Connection
box in this screen, in order for this communication to be successful.)
Click Apply to make the changes effective.
18