BOX CONTENTS
2 amplified stereo speakers
User Manual
CONNECTING THE SPEAKER SYSTEM TO AN AUDIO SOURCE
1.
Switch off your computer.
2.
Connect the green male mini-jack connector on the connection cable to the Audio out connector on your
audio source.
3.
Connect the USB power connector to your computer's USB port.
USING THE SPEAKER SYSTEM
1.
Make sure that:
- the speaker system is switched off (the LED is off),
- the Volume knob is at its minimum setting.
2.
Switch on the audio source you wish to use.
3.
Switch on your speaker system by turning the Volume knob (also the On/Off function). The LED lights up.
4.
Adjust the volume using the Volume knob.
When you connect an audio source to the Line In plug on your speaker system, the main
audio source is disabled.
TECHNICAL SPECIFICATIONS
Power supply
Frequency response
PRECAUTIONS FOR USE
Place your speakers on a flat surface, to avoid the risk of the speakers falling.
−
Never open up your speaker system, as you risk damaging its internal components.
−
This speaker system is intended for use in a temperate environment.
−
To prevent the risk of fire or electrical discharge, keep your speaker system away from:
−
rain or humidity, as well as all fluids (water, chemical products or any other liquids),
o
sources of heat such as heaters and radiators, stoves or any other heat-producing devices (including
o
amplifiers),
direct sunlight.
o
Do not expose your speaker system to drips or splashes of water.
−
Never place any object filled with liquid (a glass, vase...) on your speaker system.
−
Disconnect the speaker system before cleaning. Use a damp cloth and avoid using aerosol cleaners.
−
Attention: At full power, prolonged listening with headphones can result in damage to the user's hearing.
−
Markings are located on the back of the speakers.
−
USB
100Hz – 20,000Hz
XPS 2.010 ARC WHITE
Need help?
Do you have a question about the XPS 2.010 ARC WHITE and is the answer not in the manual?
Questions and answers