Using The Configuration Utility - D-Link AirPremier DWL-2700AP Manual

Using the Configuration Utility

To configure the DWL-2700AP, use a computer which is connected to the DWL-2700AP
with an Ethernet cable (see the Network Layout diagram).
First, disable the Access the Internet using a proxy server function. To disable
this function, go to Control Panel > Internet Options > Connections > LAN
Settings and uncheck the enable box.
Start your web browser program (Internet Explorer, Netscape Navigator)
Type the IP address and http port of the DWL-2700AP in the address field
(http://192.168.0.50) and press Enter. Make sure that the IP addresses of the
DWL-2700AP and your computer are in the same subnet.
http://192.168.0.50
7
.