D-Link AirPremier DWL-2700AP Manual page 16

Using the Configuration Utility (continued)
Advanced > Grouping
Load Balance-
When you Enable Load Balance you allow several DWL-2700APs to balance
wireless network traffic and wireless clients among the DWL-2700APs in the
network. Assign each access point a different non-overlapping channel (e.g., 1,
6, 11).
User Limit (0-64)-
Link Integrate-
When Link Integrate is Enabled, whenever the Ethernet connection
between the LAN and the AP is disconnected - then the wireless
segment associated with the AP will also be disconnected from the AP.
Ethernet Link
Status-
Click Apply-
Select Enabled or Disabled.
Set the User Limit in this field (0-64).
Select Enabled or Disabled.
This field displays the Ethernet Link Status. Link Up indicates
that there is an Ethernet LAN connection to the AP.
Click Apply to save the changes.
16