D-Link AirPremier DWL-2700AP Manual page 12

Using the Configuration Utility (continued)
Wireless Band-
802.11g
Turbo Setting-
This function is set to
Disabled. It cannot be
Enabled.
Frequency-
The frequency remains at
2.437 GHz.
Channel-
Data Rate-
Beacon
Interval-
DTIM-
Fragment
Length-
RTS Length-
Transmit
Power-
Advanced > Performance
Select from channels 1-11.
(FCC 1-11; ETSI 1-13).
The Data Rates are Auto, 1Mbps, 2Mbps, 5.5Mbps, 6Mbps, 9Mbps,
11Mbps, 12Mbps, 18Mbps, 24Mbps, 36Mbps, 48Mbps, 54Mbps.
Beacons are packets sent by an access point to synchronize a net-
work. Specify a beacon interval value. The default (100) is recom-
mended.
(Delivery Traffic Indication Message) - 1 is the default setting. DTIM
is a countdown informing clients of the next window for listening to
broadcast and multicast messages.
The fragmentation threshold, which is specified in bytes, determines
whether packets will be fragmented. Packets exceeding the 2346
byte setting will be fragmented before transmission. 2346 is the de-
fault setting
This value should remain at its default setting of 2,346. If you en-
counter inconsistent data flow, only minor modifications to the value
range between 256 and 2,346 are recommended
Choose full, half (-3dB), quarter (-6dB), eighth (-9dB), minimum power.
12