Related Manuals for D-Link nuclias DAP-X3060
Summary of Contents for D-Link nuclias DAP-X3060
- Page 1 Quick Installation Guide Nuclias Connect AX3000 Access Point DAP-X3060 Additional documentation is also available on the D-Link website...
- Page 2 Contents English...
-
Page 3: Before You Begin
Figure 1: Front Panel LED If any of the above items are damaged or Description missing, please contact your local D-Link reseller. Green (Solid) - Device operational Red (Flashing) - Device booting Note: Using a power supply with a different... -
Page 4: Interface Connectors
Description Manual Configuration Press and hold for 10 seconds to Reset factory reset the device. Note: D-Link recommends manually configuring Console RJ45 console port for debugging. the device before mounting it. The management Port computer, DHCP server and DAP-X3060 must be... - Page 5 Connecting Wirelessly Connect the management computer to the default SSID of the DAP-X3060, “dlink”. Manage the access point from a computer. Enter dapx3060.local in the address field of your browser. Log in to the administration user interface. The default login information is Username: admin Password: admin Mounting...
- Page 6 FCC: Figure 5: Attaching the Ceiling Brackets Operations in the 5.15-5.25GHz band are restricted to indoor usage only. Clip the two ceiling brackets onto a ceiling crossbar. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
-
Page 7: Federal Communication Commission Interference Statement
Appendix - Statements ErP Power Usage This device is an Energy Related Product (ErP) that automatically switches to a power-saving Network Standby mode within 1 minute of no packets being transmitted. It can also be turned off through a power switch to save energy when it is not needed. Network Standby: 6.6000 watts Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant... - Page 8 RF Frequency Requirements This device is for indoor use only when using all channels in the 5.15 to 5.25 GHz frequency range. High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this device.
-
Page 9: Technical Support
Install and use the equipment according to the instruction manual. 電波法により5GHz帯は屋内使用に限ります。 Product and Warranty Information To find out more about D-Link Nuclias product or marketing information, please visit the website http://www.dlink.com or https://www.nuclias.com. The D-Link Limited Lifetime Warranty information is available at http://www.dlink.com/warranty VCCI-B dlink.com/support... - Page 10 Notes...
- Page 11 Notes...
- Page 12 Ver. 1.01(WW) 2023/11/30...
Need help?
Do you have a question about the nuclias DAP-X3060 and is the answer not in the manual?
Questions and answers