Advertisement
Quick Links
Wireless Keypad
Model: TKP3
Programming and Operating Instruction Manual
TOPENS Website
www.topens.com
NOTE: Please read this manual carefully before install and use.
If the gate opener you want to use is not listed in the manual,
please refer to the user manual of the gate opener for programming
or contact us for technical support.
C030375
VER21a
Advertisement
Related Manuals for Topens TKP3
Summary of Contents for Topens TKP3
- Page 1 Wireless Keypad Model: TKP3 Programming and Operating Instruction Manual TOPENS Website www.topens.com NOTE: Please read this manual carefully before install and use. If the gate opener you want to use is not listed in the manual, please refer to the user manual of the gate opener for programming or contact us for technical support.
-
Page 2: Keypad Description
Thank you for purchasing the Wireless Keypad. The keypad has been integrated a LED backlight key feature. It will bring you great pleasure and convenience while you use it to operate TOPENS Gate Opener. Be sure to read the manual carefully and completely before you permanently mounting the keypad, please program the keypad and test its range. - Page 3 Use For KD&AT Series Swing Gate Opener “Learn” Transmitter code Make sure the control board of the opener is power on and in standby mode (LED flashes “ ”(“- -”)). Step 1. Press and release “LEARN” button and then LED will display “...
- Page 4 NOTE: Every step for pressing button during program must be finished within 1 second to ensure success- -full program. Use For DK&DSR Series Sliding Gate Opener “Learn” Transmitter code Control Board of DK Serises Make sure the control board of opener is power on and in standby mode (PWR LED flashes rapidly and REM LED is off, gate is stop).
-
Page 5: Control Board
Use For RK990/1200&CK1200 Sliding Gate Opener “Learn” Transmitter code OPEN CLOSE Make sure the control board of opener is power on and Control Board REM LED LEARN in standby mode (PWR LED is on and REM LED is off, gate is stop). LEARN PWR LED Learn Button... - Page 6 Use For RK700&CK700&RK500&CK500 Sliding Gate Opener “Learn” Transmitter code Make sure the control board of opener is power on and in standby mode (gate is stop). Step 1. Press and release “LNSW” button of the control board, and then LEARN LED will be on.
- Page 7 How to change the battery of Keypad Step 1: Remove the black cover with slotted screwdriver then you will find 2 screws. Step 2: Remove the front panel with screwdriver, uncover the battery holder and replace the battery. Step 3: Restore the back cover and front cover with cross screwdriver. Ref to the Figure 1~6.
-
Page 8: Troubleshooting
Step 2: Draw the antenna straight and pull it through the cable hole in the bottom of the control box. Ref to the figure 8, 9 and 10. Antenna Fig.8 Fig.9 Fig.10 TOPENS Website http://www.topenstool.com/ Trouble Shooting 1. Fail to learn the transimitter code. a. Check if the battery is exhausted. b. Re-learn the keypad anear the control board.
Need help?
Do you have a question about the TKP3 and is the answer not in the manual?
Questions and answers